Foxconn NanoPC nT-i2000 Series User manual

nT-i2000 series NanoPC
User’s Manual

Trademark:
All trademarks are the property of their respective owners.
Version:
User’s Manual V1.1 for nT-i2000 series NanoPC.
Symbol description:
Caution : refers to important information that can help you to use NanoPC bet-
ter, and tells you how to avoid problems.
Warning: indicating a potential risk of hardware damage or physical injury may
exist.
WEEE:
The use of this symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could other-
wise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city ofce, your
household waste disposal service or the shop where you purchased this product.
© All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
All images are for reference only, please refer to the physical product for specic features.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
W
A
R
N
I
N
G
!
CAUTION
!

Before using this product, please read the below safety notice carefully,
this will help to extend the product’s lifecycle, and work normally.
■ When NanoPC is working, please make sure its ventilation system is
working.
■ The power adapter is dissipating heat during normal use, please be sure
not to cover it and keep it away from your body to prevent discomfort or
injury by heat exposure.
■ Please use the power adapter that comes with the product’s package,
wrong power adapter may damage your device.
■ Make sure all the peripherals are properly connected before using Na-
noPC.
■ This product should only be used in an environment with ambient tem-
peratures between 0◦C and 40◦C.
■ Always shut down the computer before installing or uninstalling the pe-
ripheral which does not support hot plug.
■ Disconnect all peripherals before servicing or disassembling this equip-
ment.
■ Please do not disassemble this product by yourself, any disassembly not
approved by the original manufacturer may result in malfunction, and void
warranty.
■ Risk of explosion if battery is replaced by an incorrect type, please dis-
pose of used batteries according to the instructions.
CAUTION
!
Safety Notice :

TABLE OF CONTENTS
Chapter 1 Introduction of NanoPC
Top View...................................................................................................2
Front Side View........................................................................................2
Back Side View ........................................................................................3
Bottom View .............................................................................................3
Chapter 2 Placement and connection of NanoPC
Placement of NanoPC
On the Desk .........................................................................................5
On the Display Back.............................................................................5
Connection of NanoPC
Connect the Monitor.............................................................................7
Connect the USB Devices....................................................................7
Connect the Network Cable .................................................................7
Connect the Power Cord......................................................................8
Chapter 3 BIOS Setup
Enter BIOS Setup...................................................................................10
Main .......................................................................................................11
Advanced ...............................................................................................12
Power .....................................................................................................15
Security ..................................................................................................17
BootOptions............................................................................................18
Save & Exit.............................................................................................19
Chapter 4 Install Windows OS
Install Windows 7/8 ................................................................................22
Install Drivers in Windows 7/8 ................................................................26
Chapter 5 Utility
FOX WinFlash
Local Update ......................................................................................28
About & Help.......................................................................................30

Accessory List
Thanks for choosing our products. Please check the accessories listed below. If there is any-
thing broken or lost, please contact with your distributors as soon as possible.
Power Adapter Power Cord Magnet Rubber Foot
Vesa Mount Seatbase Opening Tool
Mini PCIe Half Card Support Screw Cover Screw for VESA Mounting
(M8.0X9.7mm)(4X)
Screw for HDD Support Bracket
(M:4.7X2.85mm)(4X)
Screw for Half MiniPCI Card
(M:4.4X2.85mm)(1X)
Screw for Half MiniPCI Half
Card Support Bracket
(M:4.4X4.85mm)(1X)
USB Flash Disk
8.00mm
9.70mm
3.90mm
4.70mm
2.85mm
2.92mm
4.40mm
4.85mm
2.43mm
4.40mm
2.85mm
2.42mm

This chapter introduces NanoPC’s outlook :
■ Top View
■ Front Side View
■ Back Side View
■ Bottom View

1
2
1-1 Top View
1-2 Front Side View
1
(190mm)
7.5in
5.3in
(135mm)
No. Name Description
1 Kensington Lock Attach a Kensington security system or a compatible lock to
secure your NanoPC
24mm
123 64 5
No. Name Description
1 Headphone Port Connects to a headphone
2
Microphone In and S/PDIF In
Port
Connects to a microphone or playback devices with
optical connectors(3.5mm jack)
3 Multi-Function Card Reader Support SD/SDHC/SDXC/MS/MS Pro/MMC memory
cards
4 USB 3.0 Ports Connect to USB devices
Caution:Before using it, you need to install the “AS-
Media USB3.0 driver” in the Driver CD.
5 Suspend Button Enter suspend mode in operating system
6 Power Button with
Integrated LED Indicator
Turning the power on/off, Indicates system states

1
3
1-3 Back Side View
1-4 Bottom View
There are four Magnet-Metal-Feet in the package. Just align them to the sheet metal
on the bottom, then they can magnetize the NanoPC easily. The feet can seat and
protect NanoPC when it is placed on the tabletop.
CAUTION
!
No. Name Description
1 Sheet Metal NETDVD(optional accessory) or Magnet-Metal-Feet can magnetize
them to seat rmly
1
No. Name Description
1 USB 2.0 Ports Connects to USB devices
2Display Output Port (VGA) Connects to display device
3HDMI Port Connects to HDMI audio and video
4 Network Port Standard RJ-45 network port
5
Line Out and S/PDIF Out Port Connects to powered analog speakers or record-
ing devices with optical connectors(3.5mm jack)
6 Power Input Port Connects to the power adapter
4
3 6521

In this chapter, the placement and the connection of some neces-
sary peripherals will be introduced.
This chapter includes the following information:
■ Placement of NanoPC
■ Connection of NanoPC

2
5
2-1 Placement of NanoPC
1. On the Desk
1.1. You can install your NanoPC in the Seatbase like the right image.
1.2. If there is enough space on your desk, you can simply put your
NanoPC on the tabletop as shown below.
2. On the Display Back
This is the best space-saving way.
2.1. Use four screws to fasten the Vesa Mount onto the display back.
To install this Vesa Mount, your display must follow VESA75/VESA100 standard. The
two groups of holes on your display have different space between, and they help you
easily fasten the Vesa Mount onto your display.
CAUTION
!

2
6
2.2. Fit the NanoPC into the Vesa Mount with power button locating at the top for easy touch.
Lift up the NanoPC straightly to take it out.
CAUTION
!
2
1

2
7
2-2 Connection of NanoPC
1. Connect the Monitor
Connect a monitor to the NanoPC through VGA connector.
2. Connect the USB Devices
Connect USB devices to the USB ports of the NanoPC, for example, mouse and keyboard.
3. Connect the Network Cable
Connect LAN cable to the RJ-45 port, with the other end connected to a hub or switch.
or
Hub
Switch

2
8
4. Connect the Power Cord
Connect the power adapter to the power input port of the NanoPC, and push the power
button to start it.
The power adapter is dissipating heat during normal use, please make sure not to
cover it and keep it away from your body to prevent discomfort or injury from heat
exposure.
CAUTION
!
2
Outlet
1
3

This chapter tells how to change system settings through the
BIOS Setup menus. Detailed descriptions of the BIOS parameters
are also provided.
You have to run the Setup Program when the following cases
occur :
1. An error message appears on the screen during the system
Power On Self Test (POST) process.
2. You want to change the default Item settings.
This chapter includes the following information:
■ Enter BIOS Setup
■ Main
■ Advanced
■ Power
■ Security
■ BootOptions
■ Save & Exit
Since BIOS could be updated some other times, the BIOS information described in
this manual is for reference only. We do not guarantee the content of this manual
will remain consistent with the newly released BIOS at any given time in the future.
Please visit our website for updated manual if it is available.

3
10
Enter BIOS Setup
The BIOS is the communication bridge between hardware and software, correctly setting up the
BIOS parameters is critical to maintain optimal system performance. Power on the computer,
when the message "Press <Del> to enter setup, <F11> Display Boot Menu" appears at the bot-
tom of the screen, you can press <DEL> key to enter Setup.
Use the arrow right/left keys to select a specic function and go to the submenu. Each function is
explained below:
Main
It displays the basic system conguration, such as CPU Name, memory size, system date,
time and so on. They all can be viewed or set up through this menu.
Advanced
The advanced system features can be set up through this menu.
Power
All the items related with Green function features can be setup through this menu.
Security
The Administrator/User password can be set up through this menu to prevent unauthorized
use of your computer. If you set a password, the system will ask you to key in correct
password before boot or access to Setup.
BootOptions
Boot features can be set up through this menu. You can set the boot device priority and enable
"Quiet Boot" feature here.
Save&Exit
The optimal performance settings can be loaded through this menu. However, it may offer
better performance in some ways (such as less I/O cards, less memory ...etc.), still, it may
cause problem if you have more memory or I/O cards installed. It means, if your system
loading is heavy, set to optimal default may sometimes come out an unstable system. What
you need now is to adjust BIOS setting one by one, trial and error, to nd out the best setting
for your current system. You also can save or discard the changes and exit BIOS setup here.
We do not suggest that you change the default values in the BIOS Setup, and we shall
not be responsible for any damage which resulted from the change you made.
CAUTION
!

3
11
Main Menu
The BIOS Setup is accessed by pressing the <Del> button after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins. Once you enter the BIOS Set-
up Utility, the Main Menu will appear on the screen. The Main Menu provides System Overview
information and allows you to set the System Time and Date. Use the “←” and “→” cursor keys to
navigate between menu screens.
► System Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. Use [+] or [-] to input the value.
► System Time
This item allows you to congure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to
select a eld. Use [+] or [-] to input the value.
The three elds of the setting are <hour> : <minute> : <second> respectively.
► Access Level
It displays your current access level. If you enter system with a user password, it will dispaly
“User”. If no password is set or you enter system with administrator password, this item will
dispaly “Administrator”.
System BIOS
project Version C66F1P01
Build Date 11/28/2012
EC Version 12.F1.02
Processor
Intel (R) Celeron (R) CPU 847 @
Core Frequency 1.10 GHz
Count 2
Chipset
Intel PCH SKU Name NM70
System Memory
Memory Frequency 1333 Mhz
System Memory Size 4096 MB(DDR3)
System Date [Wed 11/28/2012]
System Time [15:20:28]
Access Level Administrator
↑ ↓ → ← : Move
Enter: Select
+/-: Change Opt
ESC: Exit
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit Setup
F7: Load User-dened Defaulta
F8: Save as User-dened
Set the Date. Use tab to
switch between Date elements.
Version 2.15.1231. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced Power Security BootOptions Save & Exit
Main

3
12
Advanced
►Miscellaneous/Integrated Periperals/SATA Configuration
Press<Enter>to go to relative submenu.
Miscellaneous
►Bootup Num-Lock
This item denes if the keyboard Num Lock key is active when your system is started. The
available settings are: On and Off (default).
▶ Miscellaneous
▶Integrated Periperals
▶ SATA Configuration
↑ ↓ → ← : Move
Enter: Select
+/-: Change Opt
ESC: Exit
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit Setup
F7: Load User-dened Defaulta
F8: Save as User-dened
Miscellaneous
Version 2.15.1231. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced Power Security BootOptions Save & Exit
Main Advanced
Bootup Num-Lock [off]
↑ ↓ → ← : Move
Enter: Select
+/-: Change Opt
ESC: Exit
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit Setup
F7: Load User-dened Defaulta
F8: Save as User-dened
Select the keyboard NumLock state
Version 2.15.1231. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced Power Security BootOptions Save & Exit
Main Advanced

3
13
Integrated Peripherals
USB Configuration
Onboard USB3.0 Controller [Enabled]
PCH Azalia Configuration
Azalia [Enabled]
↑ ↓ → ← : Move
Enter: Select
+/-: Change Opt
ESC: Exit
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit Setup
F7: Load User-dened Defaulta
F8: Save as User-dened
Enable/Disable Onboard USB3.0
Controller.
Version 2.15.1231. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced Power Security BootOptions Save & Exit
Main Advanced
► Onboard USB3.0 Controller
This item is used to enable or disable the onboard USB3.0 Controller.
► Azalia
This item is used to enable or disable the Azalia.

3
14
AHCI mode is not available under Windows XP, please select IDE mode.
CAUTION
!
SATA configuration
SATA Controller(s) [Enabled]
SATA Mode Selection [AHCI]
↑ ↓ → ← : Move
Enter: Select
+/-: Change Opt
ESC: Exit
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit Setup
F7: Load User-dened Defaulta
F8: Save as User-dened
Enable/Disable SATA Device.
Version 2.15.1231. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced Power Security BootOptions Save & Exit
Main Advanced
► SATA Controller(s)
[Disabled] : Disable SATA Controller.
[Enabled] : Enable SATA Controller.
► SATA Mode Selection
This item is used to set the operation mode of your SATA ports. Setting values are: [IDE];
[AHCI].
[IDE] - This congures the SATA ports to support IDE mode.
[AHCI] - The Advanced Host Controller Interface (AHCI) specication describes the register
level interface for a Host Controller for Serial ATA. The specication includes a description of
the hardware/software interface between system software and the host controller hardware.
AHCI provides more advanced features including SATA features, but some SATA drives may
not support AHCI, unless they are labeled with AHCI support in its specication.
If your motherboard supporting AHCI, and you have a SATA device, which also supports AHCI,
then you can select IDE option to have fair performance, or you can
select AHCI to get its best performance.

3
15
Power
► Restore on AC Power Loss
This item is used to set which state the PC will take with when it resumes after an AC power
loss.
► Deep Sleep Support
This item is used to enable or disable Deep Sleep Support function.When entering deep sleep
mode system(S4/S5) only can wake up from power button.
Restore On AC Power Loss [Last state]
Deep Sleep Support [Enabled]
↑ ↓ → ← : Move
Enter: Select
+/-: Change Opt
ESC: Exit
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit Setup
F7: Load User-dened Defaulta
F8: Save as User-dened
Set the restore on AC power loss function
Version 2.15.1231. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced Power Security BootOptions Save & Exit
Main Power