Foxconn nT-i1200 User manual

nT-i1000 Series Nettop
User’s Manual

Trademark:
All trademarks are the property of their respective owners.
Version:
User’s Manual V1.0 for nT-i1000 Series Nettop.
P/N: 3A2235F00-000-G
Symbol description:
Caution : refers to important information that can help you to use NETTOP
better, and tells you how to avoid problems.
Warning: indicating a potential risk of hardware damage or physical injury may
exist.
WEEE:
The use of this symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could other-
wise be caused by inappropriate waste handling of this product. For more detailed

household waste disposal service or the shop where you purchased this product.
© All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
W
A
R
N
I
N
G
!
CAUTION
!

Before using this product, please read the below safety notice carefully,
this will help to extend the product’s lifecycle, and work normally.
 
working.
 
not to cover it and keep it away from your body to prevent discomfort or
injury by heat exposure.
 
wrong power adapter may damage your device.
 -
TOP.
 -
peratures between 0C and 40C.
 -
ripheral which does not support hot plug.
 -
ment.
 any disassembly not
approved by the original manufacturer may result in malfunction, and void
warranty.
 -
pose of used batteries according to the instructions.
CAUTION
!
Safety Notice :

TABLE OF CONTENTS
Chapter 1 Introduction of NETTOP
Top ViewView...................................................................................................2
Front Side ViewView ........................................................................................2
Back Side ViewView ........................................................................................3
Bottom ViewBottom View .............................................................................................3
Chapter 2 Placement and connection of NETTOP
Placement of NETTOP
  .........................................................................................5
 .............................................................................5
Connection of NETTOP
Connect the MonitorMonitor.............................................................................7
     ....................................................................7
Connect the Network CableConnect the Network CableNetwork Cable .................................................................7
Connect the Power CordConnect the Power CordPower Cord......................................................................8
Chapter 3 BIOS Setup
Enter BIOS Setup...................................................................................10
Main .......................................................................................................11
Advanced ...............................................................................................13
Power .....................................................................................................16
Security ..................................................................................................18
Boot Options...........................................................................................20
Save & Exit.............................................................................................21
Chapter 4 Install Windows OS
Install Windows 7 ...................................................................................24
      ...................................................................28
FOX WinFlash
Local Update ....................................................................................29
About & Help ....................................................................................31

Accessory List
Thanks for choosing our products. Please check the accessories listed below. If there is any-
thing broken or lost, please contact with your distributors as soon as possible.
Power Adapter Power Cord Magnet Rubber Foot
Vesa Mount Seatbase Opening Tool
Mini PCIe Half Card Support Screw Cover Screw for VESA Mounting
(M8.0X9.7mm)(4X)
Screw for HDD Support Bracket
(M:4.7X2.85mm)(4X)
Screw for Half MiniPCI Card
(M:4.4X2.85mm)(1X)
Screw for Half MiniPCI Half
Card Support Bracket
(M:4.4X4.85mm)(1X)
8.00mm
9.70mm
3.90mm
4.70mm
2.85mm
2.92mm
4.40mm
4.85mm
2.43mm
4.40mm
2.85mm
2.42mm

This chapter introduces NETTOP’s outlook :

 
 
 

1
2
1-1 Top View
1-2 Front Side View
1
(190mm)
7.5in
5.3in
(135mm)
No. Name 
1 Kensington Lock Attach a Kensington security system or a compatible lock to
secure your Nettop
24mm
123 6 45
No. Name 
1 Headphone Port Connects to a headphone
2 
Port
Connects to a microphone or playback devices with
optical connectors(3.5mm jack)
3 Multi-Function Card Reader 
4 USB 3.0 Ports Connect to USB devices
Caution:Before using it, you need to install the “AS-AS-

5 Suspend Button Enter suspend mode in operating system
6 Power Button with

Turning the power on/off, Indicates system statesIndicates system states

1
3
1-3 Back Side View
1-4 Bottom View
There are four Magnet-Metal-Feet in the package. Just align them to the sheet metal
on the bottom, then they can magnetize the NETTOP easily. The feet can seat and
protect NETTOP when it is placed on the tabletop.
CAUTION
!
No. Name 
1 Sheet Metal Magnet-Metal-Feet can magnetize

1
No. Name 
1 USB 2.0 Ports Connects to USB devices
2 Connects to display device
3 
4 Network Port Standard RJ-45 network port
5  Connects to powered analog speakers or record-
ing devices with optical connectors(3.5mm jack)
6 Power Input Port Connects to the power adapter
4
3 6521

In this chapter, the placement and the connection of some neces-
sary peripherals will be introduced.
This chapter includes the following information:

 

2
5
2-1 Placement of NETTOP
1. On the Desk
1.1. You can install your NETTOP in the mount like the right image.
1.2. If there is enough space on your desk, you can simply put your
NETTOP on the tabletop as shown below.
2. On the Display Back
This is the best space-saving way.
2.1. Use four screws to fasten the bracket onto the display back.
To install this bracket, your display must follow VESA75/VESA100 standard. The two
groups of holes on your display have different space between, and they help you
easily fasten the bracket onto your display.
CAUTION
!