Foxconn nT-270 User manual

NETBOX User’s Manual

Trademark:
All trademarks are the property of their respective owners.
Version:
User’s Manual V1.0 for NETBOX.
P/N: 3A221QK00-000-G
Symbol description:
Caution : refers to important information that can help you to use NETBOX
better, and tells you how to avoid problems.
WEEE:
The use of this symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could other-
wise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city ofce, your
household waste disposal service or the shop where you purchased this product.
CAUTION
!
© All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
All images are for reference only, please refer to the physical product for specic features.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS

Safety Notice :
Before using this product, please read the below safety notice carefully,
this will help to extend the product’s lifecycle, and work normally.
■ When NETBOX is working, please make sure its ventilation system is
working.
■ The power adapter is dissipating heat during normal use, please be sure
not to cover it and keep it away from your body to prevent discomfort or
injury by heat exposure.
■ Please use the power adapter that comes with the product’s package,
wrong power adapter may damage your device.
■ Make sure all the peripherals are properly connected before using NET-
BOX.
■ This product should only be used in an environment with ambient tem-
peratures between 0◦C and 40◦C.
■ To reduce the risk of re, use only No. 26 AWG or larger UL listed or
CSA certied telecommunication line cord.
■ Always shut down the computer before installing or uninstalling the pe-
ripheral which does not support hot plug.
■ Disconnect all peripherals before servicing or disassembling this equip-
ment.
■ Please do not disassemble this product by yourself, any disassembly
not approved by the original manufacturer may result in malfunction, and
void warranty.
■ Risk of explosion if battery is replaced by an incorrect type, please dis-
pose of used batteries according to the instructions.
CAUTION
!

TABLE OF CONTENTS
Chapter 1 Introducing the NETBOX
Top ViewView...................................................................................................2
Front Side ViewView........................................................................................2
Back Side ViewView ........................................................................................3
Bottom ViewBottom View .............................................................................................3
LED Indicator Introduction........................................................................4
Chapter 2 Placing and connecting the NETBOX
Placement of NETBOX
On the Desk .........................................................................................6
On the Display Back.............................................................................6
Connection of NETBOX
Connect the AntennaAntenna............................................................................8
Connect the MonitorMonitor.............................................................................8
Connect the USB DevicesConnect the USB DevicesUSB Devices....................................................................8
Connect the Network CableConnect the Network CableNetwork Cable .................................................................9
Connect the Power CordConnect the Power CordPower Cord......................................................................9
Chapter 3 Install Windows XP in NETBOX
Install Windows XP.................................................................................11
Install Drivers in Windows XP ................................................................14
Chapter 4 FoxOS Introduction
First Boot................................................................................................16
Desktop ..................................................................................................18
Internet ConnectionInternet Connection................................................................................20
“Help” Introduction..................................................................................24
Recover FoxOS 3.0 Home .....................................................................25

The NETBOX is very compact and easily to be used on the
desktop. It features all the desktop computer capabilities with a
slim body design which enables you to use it in a relaxable and
comfortable way.
This chapter introduces NETBOX’s outlook:
■ Top View
■ Front Side View
■ Back Side View
■ Bottom View
■ LED Indicator Introduction

1
2
Introduction
NETBOX features all the desktop computer capabilities with a slim body design which enables you
to use it in a relaxable and comfortable way.
1-1 Top View
1-2 Front Side View
No. Name Description
1 Headphone Out Port Connects to a headphone or amplied speaker
2 Microphone In and S/PDIF In
Port
Connects to a microphone or playback devices with
optical connectors(3.5mm jack)
3Multi-Function Card Reader Support MS/SD/MMC memory cards
4 USB Ports Connect to USB devices
5LLS_LED(1,2,3,4,5) Indicate different system state
6 HDD_LED Indicates hard disk states
7 Suspend Button Enter suspend mode in operating system
8 Power Button with
Integrated LED Indicator
Turning the power on/off, Indicates system statesIndicates system states
190mm
135mm
123 4 7 8
24mm
56
LLS_LED1 LLS_LED5

1
3
1-3 Back Side View
1-4 Bottom View
No. Name Description
1 Sheet Metal NETDVD(optional accessary) or Magnet-Metal-Feet can mag-
netize them to seat rmly
No. Name Description
1RF(Radio Frequency) Port Connects to antenna
2 Line Out and S/PDIF Out Port Connects to powered analog speakers or record-
ing devices with optical connectors(3.5mm jack)
3 Network Port Standard RJ-45 network port
4Display Output Port Connects to display device
5 USB Ports Connect to USB devices
6Power Input Port Connects to the power adapter
There are four Magnet-Metal-Feet in the package. Just align them to the sheet metal
on the bottom, then they can magnetize the NETBOX easily. The feet can seat and
protect NETBOX when it is placed on the tabletop.
CAUTION
!
162 3 5
4
1

1
4
1-5 LED Indicator Introduction
In this chapter, the placement and the connection of some neces-
sary peripherals will be introduced.
This chapter includes the following information:
■ Placement of NETBOX
■ Connection of NETBOX
Indication Power_
LED
HDD_
LED
LLS_
LED1
LLS_
LED2
LLS_
LED3
LLS_
LED4
LLS_
LED5
S0(Working Mode) Green - Off Off Off Off Off
S1(Power-Saving Mode) Green Off Off Off Off Off Off
S3(Standby Mode) Red Off Off Off Off Off Off
S4(Hibernation Mode)
&S5(System Power Off Mode)
Red Off Off Off Off Off Off
CPU
Initialization Errorr
- - Blue,
Blink
- - - -
DRAM Error - - - Blue,
Blink
- - -
BIOS Boot Block Fail - - - - - Blue,
Blink
-
BIOS
Checksum Error
- - - - - - Blue,
Blink
CMOS Cleared Red,
Blink
- - - - - -
HDD R/W Data -Red - - - - -
The LLS_LEDs status in this table only show BIOS error message.
CAUTION
!

In this chapter, the placement and the connection of some neces-
sary peripherals will be introduced.
This chapter includes the following information:
■ Placement of NETBOX
■ Connection of NETBOX

2
6
2-1 Placement of NETBOX
1. On the Desk
1. You can install your NETBOX in the mount like the right image.
To install this bracket, your display must follow VESA75/VESA100 standard. The two
groups of holes on your display have different space between, and they help you eas-
ily fasten the bracket onto your display.
CAUTION
!
2. On the Display Back
This is the best space-saving way.
1. Use four screws to fasten the bracket onto the display back.
2. If there is enough space on your desk, you can simply put your
NETBOX on the tabletop as shown below.