Foxconn Bloodrage User manual

Bloodrage Motherboard
User’s Manual

Statement:
This manual is the intellectual property of Foxconn, Inc. Although the information
in this manual may be changed or modied at any time, Foxconn does not obligate
itself to inform the user of these changes.
Trademark:
All trademarks are the property of their respective owners.
Version:
User’s Manual V1.1 for Bloodrage motherboard.
Symbol description:
Caution: refers to important information that can help you to use motherboard
better, and tells you how to avoid problems.
Warning: indicating a potential risk of hardware damage or physical injury may
exist.
WEEE:
The use of this symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city ofce, your
household waste disposal service or the shop where you purchased this product.
More information:
If you want more information about our products, please visit Foxconn’s
website: http://www.foxconnchannel.com
CAUTION
!
W
A
R
N
I
N
G
!
© All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
All images are for reference only, please refer to the physical motherboard for specic features.

Declaration of conformity
HON HAI PRECISION INDUSTRY COMPANY LTD
66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
TAIPEI HSIEN, TAIWAN, R.O.C.
declares that the product
Motherboard Bloodrage
is in conformity with
(reference to the specication under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
■ EN 55022: 1998/A2: 2003 Limits and methods of measurements of radio
disturbance characteristics of information technology
equipment
■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)
■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage uctuations and icker in low
voltage supply systems for equipment with rated current <=
16A
■ EN 55024/A2:2003 Information technology equipment-Immunity characteristics
limits and methods of measurement
Signature : Place / Date : TAIPEI/2009
Printed Name : James Liang

Declaration of conformity
Trade Name: FOXCONN
Model Name: Bloodrage
Responsible Party: PCE Industry Inc.
Address: 458 E. Lambert Rd.
Fullerton, CA 92835
Telephone: [phone]
Facsimile: 714-738-8838
Equipment Classication: FCC Class B Subassembly
Type of Product: Motherboard
Manufacturer: HON HAI PRECISION INDUSTRY
COMPANY LTD
Address: 66 , CHUNG SHAN RD., TU-CHENG
INDUSTRIAL DISTRICT, TAIPEI HSIEN,
TAIWAN, R.O.C.
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions : (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Tested to comply with FCC standards.
Signature : Date : 2009

Installation Precautions
Please carefully read the following procedures to install your computer :
■ It is suggested to select high-quality, certied fans in order to avoid damage
to the motherboard and CPU due to high temperature. Never turn on the
computer if the CPU Heatsink is not properly installed.
■ We cannot guarantee that your system can operate normally when over-
clocked. Stable operation at overclocked speeds depends on the overclock-
ing capabilities of all devices
■ When connecting USB, 1394a or S/PDIF cables to the internal connectors
on the motherboard, make sure their pinouts are matching with the connec-
tors on the motherboard. Incorrect connections might damage the mother-
board.
■ When handling the motherboard, avoid touching any metal leads or connec-
tors.
■ If there is a PCI Express x16 graphics card installed in your system, we
recommend using a 24-pin ATX power supply to get the best performance.
■ Before turning on the power, please make sure the power supply AC input
voltage setting has been congured to the local standard.
■ To prevent damage to the motherboard, do not allow screws to come in contact
with the motherboard circuit or its components. Also, make sure there are no
leftover screws or metal components placed on the motherboard or within the
computer casing.
■ If you are uncertain about any installation steps or have a problem related to
the use of the product, please consult a certied computer technician.
CAUTION
!
■ Electrostatic discharge (ESD) is the sudden and momentary electric current
that ows between two objects at different electrical potentials. Normally it
comes out as a spark which will quickly damage your electronic equipment.
Please wear an electrostatic discharge (ESD) wrist strap when handling
components such as a motherboard, CPU or memory.
■ Ensure that the DC power supply is turned off before installing or removing
CPU, memory, expansion cards or other peripherals. It is recommended to
unplug the AC power cord from the power supply outlet. Failure to unplug
the power supply cord may result in serious damage to your system.
W
A
R
N
I
N
G
!

TABLE OF CONTENTS
Chapter 1 Product Introduction
Package List..................................................................................................2
Product Specications...................................................................................3
Layout............................................................................................................5
Back Panel Connectors.................................................................................6
Chapter 2 Hardware Install
Install the CPU and CPU Cooler ...................................................................9
Install the Memory .......................................................................................12
Install an Expansion Card............................................................................14
Install other Internal Connectors..................................................................16
Illustration of the Optional Accessory ..........................................................21
Jumpers.......................................................................................................24
Onboard Button ...........................................................................................26
Onboard LED...............................................................................................26
Onboard Debug LED...................................................................................27
Chapter 3 BIOS Setup
Enter BIOS Setup........................................................................................29
Main Menu...................................................................................................29
Standard CMOS Features...........................................................................31
Advanced BIOS Features............................................................................33
Advanced Chipset Features ........................................................................35
Integrated Peripherals .................................................................................36
Power Management Setup..........................................................................40
PnP/PCI Congurations...............................................................................43
PC Health Status.........................................................................................44
Quantum BIOS ...........................................................................................46
Board Information........................................................................................55
Load Optimized Defaults .............................................................................56
Set Supervisor Password ............................................................................56
Set User Password......................................................................................56
Save & Exit Setup........................................................................................56
Exit Without Saving .....................................................................................56
Chapter 4 CD Instruction
Utility CD Introduction..................................................................................58
AEGIS PANEL
Main Panel .............................................................................................61
HW Monitor ............................................................................................62

Overclocking...........................................................................................64
QF OC Panel..........................................................................................64
OC Gear.................................................................................................65
Conguration..........................................................................................65
FOX LiveUpdate
Local Update ..........................................................................................66
Online Update ........................................................................................68
Congure ...............................................................................................71
About & Help ..........................................................................................73
FOX LOGO..................................................................................................74
FOX DMI......................................................................................................75
Chapter 5 RAID Conguration
RAID Conguration Introduction..................................................................78
Intel®Matrix Storage Manager.....................................................................80
Create a RAID Driver Diskette.....................................................................81
BIOS Conguration......................................................................................83
Create RAID in BIOS...................................................................................83
Install a New Windows XP.........................................................................107
Existing Windows XP with RAID built as data storage .............................. 111
Appendix
ATI®CrossFireXTM Technology .................................................................. 115
NVIDIA® SLITM Technology ..........................................................................117
Technical Support :
Website :
http://www.foxconnchannel.com
Support Website :
http://www.foxconnsupport.com
Worldwide online contact Support :
http://www.foxconnchannel.com/support/online.aspx
CPU, Memory, VGA Compatibility Supporting Website :
http://www.foxconnchannel.com/product/Motherboards/compatibility.aspx
Support

Thank you for buying Bloodrage, a Foxconn Quantum Force series
motherboard. Quantum Force products are Foxconn's high end
enthusiast products engineered to maximize computing power,
providing all you need for break-through performance.
With advanced overclocking capabilities and a range of connectivity
features for today's multi-media computing requirements, Bloodrage
enables you to unleash more power from your computer.
This chapter includes the following information:
■ Package List
■ Product Specications
■ Layout
■ Back Panel Connectors

2
1
Package List
Check your product package for the following items:
Before your purchase, if any of the above items is damaged or missing, please contact
your retailer. Accessories are not in the warranty, only the motherboard is.
CAUTION
!
Motherboard Foxconn Bloodrage motherboard
I/O modules 1 X USB 2.0 x 2 ports and 1 x 1394a module
Cables 1 X Ultra DMA cable
1 X SAS cable
3 X SATA Signal cables
2 X SATA Power and Signal cables right angle
Accessory I/O Shield
Water Block
SONAR X-Fi Card
Extreme Cooling Tube
Thermal Peripheral Bag
Application CD Foxconn motherboard support CD
Documentation User’s Manual
Quick Installation Guide
Registration Card
CREATIVE Invite Card

3
1
1-1 Product Specications
CPU Support LGA1366 Intel® CPU:
CoreTM i7 and CoreTM i7 Extreme Series processors
Supports Intel®Hyper-Threading Technology
QPI Up to 6.4GT/s
Chipset North Bridge: Intel®X58 chipset
South Bridge: Intel® ICH10R
Memory 3 x 240-pin DDR3 DIMM sockets
Supports up to 12GB of system memory
Triple channel DDR3 1800(oc)/1600(oc)/1333/1066/800MHz
(oc*: Overclocking)
* The memory controller is integrated into the CoreTM i7 CPU, overclocking
might vary from CPU to CPU. Intel ofcially only supports DDR3 1333
Audio SONAR X-Fi Xtreme Sound Card - 7.1 channel HD Audio with EAX4.0 &
CMSS 3D support
LAN 2 x Realtek 8111C Gigabit LAN with Teaming support for 2Gb LAN
Expansion Slots 4 x PCI Express x16 slots (2 x PCIe x 16 mode or 4 x PCIe x 8 mode) with
ATI CrossFireXTM and NVIDIA SLITM support
1 x PCI Express x1 slot
1 x PCI slot
Onboard Serial ATA 6 x SATA connectors
300MB/s data transfer rate
Supports hot plug and NCQ (Native Command Queuing )
Supports RAID 0, RAID 1, RAID 5, RAID 0+1
Supports Intel®Matrix Storage Technology
2 x SAS/SATA channels by Marvell 88SE6320
300MB/s data transfer rate
Supports hot plug and NCQ (Native Command Queuing )
Supports RAID 0, RAID 1
Supports SAS
Supports SATA
USB Supports 12 USB 2.0 ports (8 rear panel ports, 2 onboard USB connectors
providing 4 extra ports)
Supports USB 2.0 protocol up to 480Mb/s
Supports hot plug
Internal Connectors 1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x Floppy disk drive connector
1 x Front panel connector
1 x 1394a connector
1 x Speaker connector
1 x HDA_DH connector
1 x VFD connector
2 x SAS_SATA connectors (Controlled by Marvell 88SE6320)

4
1
1 x CPU fan header (4-pin)
1 x System fan header (3-pin)
2 x Power fan headers (3-pin)(FAN1, FAN2)
1 x IDE connector (Controlled by JMicron JMB363)
6 x SATA connectors (Controlled by ICH10R)
2 x USB 2.0 connectors (Supporting 4 x USB devices)
Back Panel 1 x PS/2 Keyboard port
Connectors 1 x Coaxial S/PDIF out connector
8 x USB 2.0 ports
1 x 1394a port
2 x RJ-45 LAN ports
1 x Clear CMOS button
2 x External SATA ports (Controlled by JMicron JMB363)
Hardware Monitor System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU/System overheating shutdown
CPU/System fan speed control
Onboard 1394a Supports hot plug
Supports 400Mb/s transmission rate
Supports 2 independent 1394a devices
PCI Express x16 PCI-E1_16X and PCI-E2_16X support 8GB/s (16GB/s concurrent)
bandwidth
PCI-E1_8X and PCI-E2_8X support 2GB/s (4GB/s concurrent) bandwidth
Low power consumption and power management features
PCI Express x1 Supports 500MB/s (1GB/s concurrent) bandwidth
Low power consumption and power management features
Green Function Supports ACPI (Advanced Conguration and Power Interface)
Supports S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4
(suspend to disk), and S5 (soft - off)
Bundled Software AEGIS PANEL
FOX LiveUpdate
FOX LOGO
FOX DMI
Operating System Supports for Microsoft®Windows®Vista/XP
Form Factor ATX Form Factor, 12 inches x 9.6 inches (30.5cm x 24.4cm)
This motherboard does not support Windows® 2000.
CAUTION
!

5
1
1-2 Layout
Note : The above motherboard layout is for reference only, please refer to the
physical motherboard for detail.
1. 8-pin ATX 12V Power Connector
2. System Fan Header
3. HDA_DH Header
4. PCI Express x1 Slot
5. PCI Express x16 Slots
6. PCI Slot
7. VBAT_DISCHARGE Jumper
8. Floppy Connector
9. 1394a Connector
10. Front USB Connectors
11. FAN1 Header
12. SAS_SATA Connectors
13. Front Panel Connector
14. Debug LED
15. Power on Button
16. Reset Button
17. SATA Connectors
18. BIOS ROM 2
19. BIOS ROM 1
20. IDE Connector
21. BIOS_Select Jumper
22. FAN2 Header
23. Speaker Connector
24. VFD Connector
25. 24-pin ATX Power Connector
26. Force_Reset Button
27. Button_En Jumper
28. DDR3 DIMM Slots
29. South Bridge: Intel® ICH10R
30. CPU Fan Header
31. LGA1366 CPU Socket
32. North Bridge: Intel® X58 Chipset
13
20 22
31
11
25
7
8
1
2
9
16 18
32
28
26
23
29
30
34
6 5
10
12
15
17
27
19 21 24
14

6
1
1-3 Back Panel Connectors
1. PS/2 Keyboard Port
Use the lower port (purple) to connect a PS/2 keyboard.
2. USB Ports
The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as an
USB keyboard/mouse, USB printer, USB ash drive and etc.
3. Clear CMOS Button
Onboard Clear CMOS button is located directly on the motherboard PCB, so you can easily clear
CMOS after failed overclocking attempts.
4. Coaxial S/PDIF Out Connector
This connector provides digital audio out to an external audio system that supports digital coaxial
audio. Before using this feature, ensure that your audio system provides a coaxial digital audio in
connector.
■ Make sure the power supply is turned off before pressing the CLR_CMOS button to
clear CMOS.
■ Push down the CLR_CMOS button and hold it there for a couple of seconds to clear
the CMOS completely, then release.
CAUTION
!
External SATA
Ports
USB Ports
LAN Ports
PS/2 Keyboard Port
Coaxial
S/PDIF Out
1394a Port
4
1 7
2
26 8
Audio Ports
Line Out
Microphone
Subwoofer
Rear Speaker
Side Speaker
Line In
3
5
USB Ports
Clear CMOS
Button

7
1
5. 1394a Port
This port is used to connect a 1394a device.
6. External SATA Port
To connect external SATA device(s) to your system by expanding the internal SATA port(s) to the
chassis back panel. External SATA device shall provide power by its own.
7. RJ-45 LAN Port
Each Gigabit Ethernet LAN port provides Internet connection at up to 1Gb/s data rate.
Both Gigabit Ethernet LAN ports can be combined in teaming mode to support connection speeds
up to 2Gb/s!
8. Audio Ports (SONAR X-Fi Card)
For the denition of each audio port, please refer to the table below :
Note: The SONAR X-Fi card is in the package, you can connect it to the back panel.
Port 2-channel 4-channel 5.1-channel 7.1-channel
Blue Line In Line In Line In Line In
Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Microphone In Microphone In Microphone In Microphone In
Orange - - Center/Subwoofer Out Center/Subwoofer Out
Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out
Grey - - - Side Speaker Out
LAN Type Left: Active Right: Link
Status Description Status Description
1000M
Off No Link Off No Link
Green
Blinking
Data
Activity
Off 10 Mb/s Connection
Green 100 Mb/s Connection
Orange 1000 Mb/s Connection
Active
LED
Link
LED

This chapter introduces the hardware installation process,
including the installation of the CPU, memory, power supply,
slots, pin headers and the mounting of jumpers. Caution should
be exercised during the installation of these modules. Please
refer to the motherboard layout prior to any installation and read
the contents in this chapter carefully.
This chapter includes the following information :
■ Install the CPU and CPU Cooler
■ Install the Memory
■ Install an Expansion Card
■ Install other Internal Connectors
■ Illustration of the Optional Accessory
■ Jumpers
■ Onboard Button
■ Onboard LED
■ Onboard Debug LED
Please visit the following website for further details on supported CPUs,
Memory and VGAs for your motherboard :
http://www.foxconnchannel.com/product/Motherboards/compatibility.aspx

9
2
2-1 Install the CPU and CPU Cooler
Install the CPU
Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
LGA1366 CPU Socket
Alignment Key
Pin_1 Corner of the CPU Socket
LGA1366 CPU
Notch
Pin_1 triangle marking of CPU
Read the following guidelines before you begin to install the CPU :
■ Make sure that the motherboard supports the CPU.
■ Always turn off the computer and unplug the power cord from the power supply before
installing the CPU to prevent hardware damage.
■ Unlock and open the CPU socket carefuly.
■ Remove the socket protection cap.
■ Locate the Pin_1 of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or
you may locate the notches on both sides of the CPU and alignment keys on the CPU
socket.)
■ Close and lock the CPU socket carefuly.
■ Check if your heatsink has a thermal pad or thermal grease preapplied. If yes make
sure to remove possible plastic protections from the bottom of the Heatsink before
you install it. If no, apply an even and thin layer of thermal grease on the surface of
the CPU.
■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating
and damage of the CPU may occur.
■ Install and fasten the CPU Heatsink.
■ Connect the Heatsinks dan to the CPU fan connector.
■ After the rst boot up we recommend entering the BIOS by hitting the "DEL" key and
loading the setup/optimized defaults.
■ Apply an even and thin layer of thermal grease on the surface of the CPU.
■ Remember to always check if your system works properly and stable with the default
conguration before voiding your warranty by altering the system conguration.
CAUTION
!

10
2
Follow the steps to install the CPU onto the CPU socket :
2. Lift the metal cover on the CPU
socket.
5. When CPU is properly seated,
replace the metal cover and push the
CPU socket lever back to its locked
position.
4. Check pin one marking (triangle)
with the pin one corner of the CPU
socket, align the CPU notches with
the socket alignment keys and gently
put the CPU onto the socket.
Before installing the CPU, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the CPU.
CAUTION
!
3. Remove protective socket cover.
1. Release the CPU socket lever.
Lift up the socket cover with only vertical motion.
CAUTION
!

11
2
Install the CPU Cooler
Follow the steps below to correctly install the CPU cooler on the motherboard. The Foxconn
QuantumForce BloodRage comes equipped with socket 1366 and socket 775 mounting holes to
support current Heatsinks, waterblocks, phase change coolers and DI/LN2 pots without the need
for modications or upgrade kits.
1. Apply and spread an even thermal
grease on the surface of CPU.
2. Place the four bolts of the CPU
cooler to the holes of the motherboard,
push them straight down from the top,
and the bolts will be fastened on the
motherboard. That's it.
3. Check the solder side of the
motherboard, the push pin should be
xed as depicted in the picture.
3
2
1
4. Attach the 4-wire CPU cooler
connector to the CPU fan socket on
the motherboard .
Release bolts of CPU cooler from
motherboard :
1. Turning the push pin (bolt)
along with the direction of arrow
(counterclockwise).
2. Pull the push pin straight up.
3. Turning push pin clockwise to its
default position.
Socket 775 Push-Pin Heatsinks like the Intel 775 stock Heatsinks will NOT t properly
since the 1366 CPU socket is slightly higher than the 775 CPU socket!
W
A
R
N
I
N
G
!

12
2
2-2 Install the Memory
Triple Channel Memory Conguration
This motherboard provides three DDR3 memory sockets and supports Triple Channel Technology.
When memory is installed, the BIOS will automatically check the memory in your system.
The combinations of DIMM modules are :
DIMM1 DIMM2 DIMM3
Triple Channel DS/SS DS/SS DS/SS
Dual Channel DS/SS DS/SS -
Dual Channel DS/SS - DS/SS
Dual Channel - DS/SS DS/SS
Single Channel DS/SS - -
Single Channel - DS/SS -
Single Channel - - DS/SS
(DS : Double Side, SS : Single Side, - : No Memory)
It is recommended that memory of the same capacity, brand, speed, and chips be
used and please select dual channel rst to achieve optimum performance.
CAUTION
!
Read the following guidelines before you begin to install the memory :
■ Make sure that the motherboard supports the memory. It is recommended that memory
of the same capacity, brand, speed, and chips be used.
■ Always turn off the computer and unplug the power cord from the power outlet before
installing the memory to prevent hardware damage.
■ Memory modules have a foolproof design. A memory module can be installed in only
one direction. If you are unable to insert the memory, switch the direction.
CAUTION
!
■ Use caution when removing the CPU cooler because the thermal grease may stick it
to the CPU. If the Heatsink is stuck slightly twist it left and right until you can remove
it. Be patient and do not use a lot of force.
■ We can not guarantee that any of fans can work normally, including the Intel stock
775 fan. You should conrm that the interface bewteen the fan and the CPU is in good
status.
CAUTION
!

13
2
Installing a Memory
If you take a look at front side of memory module, it has asymmetric pin counts on both sides
separated by a notch in the middle, so it can only t in one direction. Follow the steps below to
correctly install your memory modules into the sockets.
Step 1:
Spread the clips at both ends of the memory socket. Place
the memory module onto the socket, then put your ngers
on top edge of the module, and push it down rmly and
seat it vertically into the memory socket.
Step 2:
The clips at both ends of the socket will snap into place
when the memory module is securely inserted.
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module. Be sure
to install DDR3 DIMMs on this motherboard.
CAUTION
!
144-Pin
96-Pin
Notch