Foxun HDBaseT SX-EX53 User manual

1
HDBaseTTM Ultra Slim Extender Kit
HDR, 4K@60Hz 4:4:4, up to 40M

2
Operating Instruction
Thank you for purchasing this product. For optimum performance and safety, please
read these instructions carefully before connecting, operating or adjusting this
product. Please keep this manual for future reference.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this
equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
Do not attach the power supply cabling to building surfaces.
Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.

3
Operating Instruction
CONTENTS
1.INTRODUCTION...............................................................................4
2.APPLICATIONS.................................................................................4
3. PACKAGE CONTENTS...................................................................4
4. SYSTEM REQUIREMENTS...........................................................4
5. FEATURES........................................................................................5
6. SPECIFICATIONS...........................................................................5
7. OPERATION CONTROLS AND FUNCTIONS...........................6
7.1 Transmitter Front and Rear...........................................................6
7.2 Receiver Front and Rear Panels....................................................7
8. CONNECTION DIAGRAM............................................................8
9. MAINTENANCE..............................................................................9
10. PRODUCT SERVICE.....................................................................9
11. WARRANTY.....................................................................................9

4
Operating Instruction
1. INTRODUCTION
This Model allows HDMI signals to be transmitted over a Single CAT5e/6 cable.
This solution has the added features of RS232 and 2-way IR control functionality
over the same CAT5e/6 cable. It can extend 4K@60Hz HDR 10 over a HDBaseT
link and upto 40M ! The slimmest HDBaseT design, making it perfect to mount
behind ultra thin TVs.
2. APPLICATIONS
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
3. PACKAGE CONTENTS
1Main unit
2Operating instructions
324V1A DC power supply
41xIR TX unit
51xIR RX unit
62 Phoenix plugs for RS232 cable termination
4. SYSTEM REQUIREMENTS
Input HDMI source equipment such as DVD/Blu-ray player and HDMI
equipped output display (TV or monitor).

5
Operating Instruction
5. Features
Bandwidth up to 18Gbps, resolution up to 4k @60hz YUV 4:4:4
Transmit up to 70m under 1080p, 40m under 4k
Support HDR10, 3D
With 1x looping HDMI out at Transmitter and 2 x HDMI out at Receiver
Bi-directional wide band IR and RS232 Pass through
Dual POC (Receiver powered by transmitter or transmitter powered by
Receiver)
HDCP2.2/ HDCP1.4 Compliant
6. Specifications
Operating Temperature Range -10 to +55°C (14 to +131 °F)
Operating Humidity Range 5 to 90 % RH (no condensation)
Input Video Signal 0.5-1.0 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Video Format Supported DTV/HDTV;
4K/1080P/1080i/720P(50HZ)/576P/480P/576i/480i
Output Video HDMI 2.0+HDCP1.4/2.2
Output Audio Support DTS-HD, Dolby-HD
Maximum Transmission Distance 70 meters for 1080P, 40 meters for 4K
Power Supply 24V1A
Poc Power from TX to RX over Cat5/6 cable
Power Consumption 12Watts
Dimensions 139.4mmH×66.8mmW×20mmD
Mass (Main unit) 0.7Kg / 1.54lb (Pairs)

6
Operating Instruction
7. OPERATION CONTROLS AND FUNCTIONS
7.1 Transmitter Front and Rear
1HDMI In: Connect to HDMI source equipment such as DVD or Blu-ray player
2HDMI Out: Connect to a HDMI equipped TV/Monitor for display of the
HDMI input source signal
3IR In: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be controlled.
4IR Out: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be controlled
5DC/12-24V: Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet
6Update: USB port to update the firmware
7CAT5e/6 Out: Connect to the receiver unit with a single CAT5e/6 cable for
transmission of all data signals
8EDID: Auto: default 4K@60Hz
Local: copy EDID from display of transmitter
Remote: copy EDID from display of receiver
9RS232 in: Connect to a PC or laptop with phoenix terminal for the
transmission of RS232 commands

7
Operating Instruction
7.2 Receiver Front and Rear Panels
1HDMI Out1: Connect to a HDMI equipped TV/Monitor for display of the
HDMI input source signal
2HDMI out2: Connect to a HDMI equipped TV/Monitor for display of the
HDMI input source signal
3IR Out: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be controlled
4IR In: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be controlled.
5DC/12-24V: Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet
6Update: USB port to update the firmware
7CAT5e/6 In : Connect to the transmitter unit with a single CAT5e/6 cable for
transmission of all data signals
8RS232 Out: Connect to the device that is to be controlled via phoenix terminal
by RS-232 commands

8
Operating Instruction
8. CONNECTION DIAGRAM