3
1
2
1. Turn on the main on/off switch
2. The LED display will read “ON”
5. Holding the jug in one hand, slide it in to the top rails and
push back until it will not go any further, ensuring that the
bottom of the jug is in line with the with the fitting below,
otherwise it will not lock correctly.
6. With the other hand, move the jug clamp lever to the
right to lock the jug in to the fitting.
WARNING: Water from this appliance is hot and can scald, take must be taken when using.
WARNING: The jug and top panel will become hot during use
and after roasting take care to avoid burning.
NOTE: To save energy and prolong the life of the heating element, turn off when not in use.
ON
26
5
3
5
6
7
5
5
6
7. Select the roasting time, using the touch pad buttons,
see below for button functions.
8. Once a button has been pressed the fan will start and a
5 second count down will appear on the LED display,
when it reaches zero the roasting will start. The LED
display will then show a count down of the roasting time,
when this reaches zero the display will start 2 minute
countdown which is the cooling cycle. Once the roasting
and cool down is complete the LED display will read “ON”
at which point the jug can be removed.
8
10
9
9. Relase the jug using the jug clamp handle
10. Pull the jug forward using the handle, take care as the
jug and beans will still be hot
11. Empty the beans into bags or a grinder for immediate
use.
