Franklin Rolodex RF-1064 User manual

User’s Guide • Mode d’emploi • Manual del usuario
Personal Organizer
Agenda électronique multilingue
Banco de datos multilingüe
RF-1064

1
License Agreement
READ THIS LICENSE AGREEMENT BEFORE USING
THE PRODUCT. YOUR USE OF THE PRODUCT
DEEMS THAT YOU ACCEPT THE TERMS OF THIS
LICENSE. IF YOU DO NOT AGREE WITH THESE
TERMS, YOU MAY RETURN THIS PACKAGE WITH
PURCHASERECEIPTTOTHEDEALERFROMWHICH
YOU PURCHASED THE PRODUCT AND YOUR
PURCHASE PRICE WILL BE REFUNDED. PRODUCT
means the software product and documentation found in
this package and FRANKLIN means Franklin Electronic
Publishers, Inc.
Limited Use License
All rights in the PRODUCT remain the property of
FRANKLIN. Through your purchase, FRANKLIN grants
you a personal and nonexclusive licensed to use this
PRODUCT. You may not make any copies of the
PRODUCT or of the data stored therein, whether in
electronic or print format. Such copying would be in
violation of applicable copyright laws. Further, you may
not modify, adapt, disassemble, decompile, translate,
createderivativeworksof,orinanywayreverseengineer
the PRODUCT. You may not export or reexport, directly
or indirectly, the PRODUCT without compliance with
appropriate governmental regulations. The PRODUCT
contains Franklin’s confidential and proprietary
information which you agree to take adequate steps to
protectfromunauthorizeddisclosureoruse.Thislicense
is effective until terminated. This license terminates
immediately without notice from FRANKLIN if you fail to
comply with any provision of this license.

2
Getting Started
To Use this Organizer for the First Time
The first time you use this organizer, you should perform
a system reset. Warning! A system reset erases any
user-entered information and clears all settings.
1. Turn the organizer over and, if necessary, care-
fully pull the battery insulation tape to remove it.
2. Press ON/OFF to turn the organizer off.
3. Use a thin, pointed object (e.g., a paper clip) to
press the reset button on the back of the organizer.
4. Press ENTER to reset the organizer.
To Change the Language
This organizer can display prompts and other messages
in five languages.
1. Press SHIFT.
2. Press A for English, S for Spanish, D for German,
F for French, or G for Italian.
To Turn the Keytone Off or On
The keytone is the beep that sounds whenever a key is
pressed. When the keytone is on, an icon ( ) appears
at the upper left of the screen.
1. Press SHIFT.
2. Press V ( ).
To Turn the Backlight Off or On
1. Press .

3
Key Guide
Function Keys
( TEL )Toggles between the business and
personal phone directories.
( SCHD / MEMO ) Toggles between the schedule and memos.
( LOCK / SET )Sets the home and world times, daily alarm,
the secret mode, and exchange rates.
( TIME )Toggles between the home and world time.
( ALARM ) Selects the alarm clock and then cycles
through the daily, hourly, and reminder alarms
to activate/deactivate them. Also turns off a
sounding daily or schedule record alarm.
( CAL / CONV ) Toggles between the calculator and converter.
Other Keys
C ( CE / C )Shifted, lets you delete a record.
QWERTYUIO
P
AS DFGHJKL
ZXCVBNM
SPACE ENTER
SHIFT
789
456
123
0
+
–
x
.=
÷
DEL INS

64K
M.CK/NEXT
M-
%
+/-
12/24
DSTAM/PM
CE/C
CHR
MC MR M+
CAP
TIME ALARM CAL/CONV
SCHD/MEMO
TEL LOCK/SET
ON/OFF

4
ENTER In a record, moves the cursor to the next
line. At the last line, stores the record.
G (
DST AM / PM )When the home time is displayed, turns
daylight savings on or off. When setting the
home time, sets a.m. or p.m.
H(12/24)Shifted, toggles times between 12- and 24-
hour time display.
ON/OFF Turns the organizer on or off.
SHIFT Pressed once, shifts a key to perform the
function printed above the key. Pressed
twice, activates the shift lock.
SPACE Types a space in records.
X (
CHR )Shifted, types special characters.
V ( )Shifted, turns the keytone on or off.
Direction Keys
Unshifted, moves cursor. Shifted, ( DEL )
deletes a character, ( INS ) inserts a space,
▲disengages or engages the caps lock,
and
▼ ( M . CK / NEXT ) displays memory remaining.
Displays records, world times, conversions.
Calculator Function Keys
C ( CE / C )Clears the most recent entry.
F (%)Calculates a percentage.
I (
MR )Retrieves a number from the memory.
L (+/-)Changes the sign (+/-) of a number.
O (
M -)Stores a negative number in the memory.
U (
MC )Clears the memory.
P (
M +)Stores a positive number in the memory.
Key Guide
▼
▼
▼
▼

5
Using the Clock
The clock lets you set a home time and view local times
around the world. You should set the home time before
viewing the world times or using the schedule.
To Set the Home Time
If you want to set the time to a.m. or p.m., make sure
that the 12-hour time display is turned on by pressing H
(12/24) until an A or P appears before the time.
1. Press (
TIME ) until the home time appears.
*LON SUN
1995 - 03 - 04
11 - 23 - 17
The home time has an asterisk at the upper left.
2. Press (
LOCK / SET ).
3. Use or to change the time zone.
If you want, you can type a city name or abbreviation
of up to six characters.
4. Use (
DEL ) and ( INS ) to move the flashing cursor.
5. Type the date and time.
If the cursor is on the time (i.e., third) line and the 12-
hour time display is set (see above), you can change the
time to or from a.m. or p.m. by pressing G (
DST AM / PM ).
6. When done, press ENTER to save your settings.
The day of the week changes when you save your
settings.

6
Using the Clock
7. To change the time to or from daylight savings
time, press G (
DST AM / PM ).
Daylight savings time is indicated by an # next to the
day of the week.
To View the World Times
The world times are calculated by adding or subtracting
hours to or from your home time. They are not separate
clocks that can be set independently of the home time.
1. Press (
TIME ) until a world time appears.
LON SUN
1995 - 03 - 04
11 - 23 - 17
The absence of an asterisk before the city abbrevia-
tion indicates that this is a world time.
2. Use or to change the time zone.
PAR SUN
1995 - 03 - 04
12 - 23 - 17

7
Using the Alarms
This organizer has three types of alarms: a single daily
alarm, a schedule reminder alarm, and an hourly chime.
To Use the Daily Alarm ( )
The daily alarm is based upon the home time and is not
affected by time zone changes.
1. Press (
ALARM ).
2. Press ( LOCK / SET ).
3. Type an hour and minutes.
4. Use G (
DST AM / PM ) to change the time to or from
a.m. or p.m.
5. Press ENTER to save your settings.
The icon indicates that the daily alarm is set.
6. When the daily alarm sounds, press to turn
off the sound.
Enabling or Disabling Reminder Alarms ( ((\)) )
To enable a reminder alarm to sound whenever a sched-
ule record occurs, press until the ((\)) icon appears at
the right on the screen. To disable the schedule reminder
alarm, press until the ((\)) icon disappears.
Enabling or Disabling the Hourly Chime ( )
To enable the hourly chime, press until the bell icon
appears at the right on the screen. To disable it, press
until the bell icon disappears..

8
Entering Records
To Enter a Phone Directory Record
Business and personal phone directory records contain
three lines of information of up to 36 characters per line.
The second and third lines store only numbers.
1. Press (
TEL ) until the business or personal
phone directory appears.
2. Type a name or other text:
• To type lower case letters, press ▲(
CAP ) to disen-
gage the caps lock and then type letters. Press ▲
(
CAP ) to engage the caps lock.
• To type symbols (e.g., $, :, #), press SHIFT twice to
engage the shift lock, press X (
CHR ) until the correct
symbol appears, and then press SHIFT.
3. Type an e-mail address or phone number:
• To type an e-mail address, press ENTER, type the
address, and then press ENTER again. (To type an
@ sign in an e-mail address, press SHIFT and then
press X (
CHR ).)
• To type a phone number, press
▼ ( M . CK / NEXT ) to go
to the next line. (To type a hyphen, use the minus
key. To type a period, press the decimal point key.)
4. In the third line, type another phone number.
5. Press ENTER to store the entry.

9
Entering Records
To Enter a Schedule Record or Memo
Schedule records and memos contain three lines of
information of up to 36 characters per line. The second
and third lines store only numbers. You can also set a
reminder alarm to sound whenever a scheduled event
occurs. Read “Using the Alarms.”
1. Press (
SCHD / MEMO ) until the schedule or memo
pad appears.
2. Type an event description or memo:
• To type lower case letters, press ▲(
CAP ) to disengage
the caps lock and then type letters. Press ▲(
CAP ) to
engage the caps lock.
• To type symbols (e.g., $, :, #), press SHIFT twice to
engage the shift lock, press X (
SYM ) until the symbol
you want appears, and then press SHIFT.
3. Press ENTER or
▼ ( M . CK / NEXT ) to go to the next line.
4. In the second line, type the year, month, and date of
the event, and then press ENTER or ▼(
M . CK / NEXT ).
If you are entering a memo, you can type numbers in
the second and third lines.
5. In the third line, type the time of the event.
6. To change the time to or from a.m. and p.m.,
press G ( DST AM / PM ).
The cursor must be positioned at a time digit (hour or
minute) and the home time must be in the 12-hour
time display.
7. Press ENTER to store the record.