Freelap Handlebar Foam User manual

Handlebar Foam
V041023
Find our FAQ (Frequently Asked Questions), as well as other manuals and user guides,
on our website at: www.freelap.com/support
If you cannot find the answers to your questions, please contact your Freelap dealer.
Find the list of Freelap dealers at: www.freelap.com/freelap-contact
The Handlebar Foam is guaranteed 2 years. If you have any questions or if you need
assistance with your device, please contact your Freelap dealer.
Technical support
After-sales service & warranty
FREELAP SA
Av. D.-Jeanrichard 2A CH-2114 Fleurier – Switzerland
[phone] - www.freelap.com
@freelap

About the Handlebar Foam
Use of the Handlebar Foam
The Handlebar Foam is the Freelap accessory which lets you securely attach your
phone to your motorbike. It lets the rider check his lap times, live throughout the race,
thanks to the MyFreelap app.
1. Install the Handlebar Foam
2. Install the smartphone
Technical sheet
Compatible smartphones
• The Handlebar Foam is compatible with standard-sized smartphones.
Size in inches +/-: 5", H 14.45 cm x L 7.32 cm x P 1.03 cm.
• The smartphone must have an Android or IOS operating system.
• You don’t need to have a SIM card. In fact, the app can be installed using a Wi-Fi
connection, and then data can be received during training, without a network or Internet
connection, using the offline mode of the MyFreelap app.
• The smartphone must be Bluetooth-enabled.
3. Display in full screen mode
• Weight: 70 g
• Dimensions: 7 x 17 x 9 cm
• Dimensions of the preformed slot for the smartphone: 14,45 x 7,32 x 1,03 cm
Further information
• Once you have started recording your Workout, click
on the menu on the top-right > then click on “Open
full screen mode”.
You can start your Workout!
The Handlebar Foam is compatible with both bar and barless handlebars.
• Undo the velcro straps located on the underside of the Handlebar Foam.
• Attach it, centred on the handlebar, by inserting the handlebar into the preformed
foam slot.
• Close by folding back the velcro straps tightly so that the Handlebar Foam does not
move.
• The velcro straps must pass under the risers of the motorbike.
• Lift up the plastic window by undoing the Velcro straps from the bottom to the top .
• Place the smartphone horizontally inside the preformed slot, the screen facing
outwards.
• Carefully close the plastic window using the Velcro straps.
For a better readability of your times on your smartphone, we recommend to activate
the full screen mode. To do this :
• Create and start your MyFreelap Workout on your smartphone.
For more details about MyFreelap app, please read our complete MyFreelap user guide
available at: www.freelap.com/support/user-guides