FreeVision Vilta User manual

VILTA
User Manual
V 1.2

welcome
1. VILTA contains two modes: Denoising and Performance
Denoising is default mode, suitable for all scenarios.
Be sure to select Denoising mode when you have high
requirement on audio quality.
The Performance is strengthen mode, which will greatly
improve the stability of gimbal. The motor response is radical
that will be accompanied with some noise.
The Performance Mode only applies to scenes that require
extreme high stability accuracy but not demand high on camera
recording quality. (Switch Denosing and Performance in App)
2. The GoPro5 AGC(Automatic Gain Control) function will greatly
amplify the background sound. Please select Wind Only mode
on GoPro 5 to minimize the noise to the lowest. GoPro3 and
GoPro4 do not have this problem.
Important Statement
Please visit official website to download the latest User Manual

01
1
2
3
45
6
7
8
9
10
11
11
12
13
14
15
16
Product Overview

02
01. Tilt Axis
02. Roll Axis
03. Pan Axis
04. Power Switch
05. Shutter Button
06. Status Indicator
07. Joystick
08. Micro-USB Charging Port
09. Dismantle Button
10. Lanyard Hole
11. Camera Fixed Knob
12. Camera Frame
13. Pan Axis Lock
14.1/4 Screw Port
15. Function Button
16. HERO3/3+/4 Frame
17. Golden Finger Connector
18. 1/4 Screw Port
19. Accessory Mounting Port
20. Handle Battery Indicator
21. Micro-USB Charging Port
22. Handle Battery
23. Camera Charging Module
(Optional)
17
21
17
18
22
19
23
20

03
Installation
1
Unlock Gimbal
1
Install Camera
2
User Manual
1) Slide the Pan Axis Lock down
2) Twist the Tilt Aixs and Roll Axis to unlock
The Status Indicator will flash red if any axis is locked
1) Insert GoPro in the Camera Frame
2) Fasten the knob as indicated
1. Put Hero 3/3+/4 into frame before installing to the
Camera Frame
2. To avoid the camera falling, please ensure the
knob is fixed before power on

04
Handle Dismantle and Mantle
3
Install Accessory
4
Accessory Mounting Port
1/4 Screw Port
Dismantle: Press handle Dismantle Button and push as
stated to demount the handle
Mantle: Release Dismantle Button and align the mount,
slightly pushing forward the gimbal
2. Ensure you hear a click while mounting the grip
Fit for GoPro official
accessories
Fit for 1/4 screw camera kit
accessories
1. After dismantling handle, double tap on Power
Button of gimbal to switch Follow Mode

05
Control
2
Joystick
1
Joystick Virtual Joystick
Y:61 P:45 100%
Setting
Quick Settings
Operation Status
Joystick
Tilt
Pan
Manual
2
Manual Mode can be turned on/ off in App
1）Long press the Power Switch and control VILTA
through joystick
2）Connect VILTA with APP and control through vitual joystick
Directly adjust the shooting direction by hand

06
Connect and Shoot
3
VILTA as Remote Control
1
GoPro5
GoPro 4
Power on the gimbal and camera, and operate camera
with the following steps
1) Long press the Shutter Button for 2 seconds to
shoot/stop shooting
2) Short press to take a picture
CONNECTIVITY Connect New Smart Remote
SETTING WI-FI RCPAIR
ON
When the Shutter Button lights off, connection is successful
Shutter Button
For more detailed function: check【Advanced】—【Shutter Button】
NEWWI-FI RC
GoPro 3/3+

07
Connect APP
2
1）Via App，you can control the gimbal and camera
2）You can select the shooting mode in the Shooting
Function Menu in the APP
VIDEO
PHOTO
TIME LAPSE
Video Video+Photo Looping
Photo Night Burst
Time lapse photo Night lapse photo Time lapse video
Download and install APP
For iphone
For Andriod
Scan the QR code below to download and install
Please search FreeVision in APP Store to download
and install
The Shooting Function Menu in the APP

08
Charging
4
VILTA Charging
1
Battery Indicator
2
GoPro Charging
3
Micro-USB
Charging Port
Charge gimbal and handle seperately through micro-USB
charging port
1) Take off the GoPro USB side door cover
(Caution: it may affect the water-proof function of GoPro)
2) Insert charging module into GoPro, the camera will be
charged by VILTA. Set GoPro charging mode in APP
GoPro charging module is an optional accessory
2) Short press on Function Button to check handle battery
level via Handle Battery Indicator.
1) Charge gimbal when the Power Switch glints.The Status
Indicator alternately glints in red,yellow and green lights
when charging. The Status Indicator turns green when
fully charged.

09
5
1
Red glint
Green glint
Warning
Busy/Auto Calibration
Status
Indicator
Yellow
Red
Green
Semi-follow Mode
Follow Mode
Lock Mode
Single tap
Press when recording Tag
Recording On/Off
Button Function
Connected (Light off)
Picture
Double tap
Long press for 2s
Shutter
Button
Pairing ( Light on)
Long press for 6s
Selfie
Single tap
Long press for 2s
Double tap
On / Off
Sleep/Awake
Power
Switch
Button Function
（wearable gimbal only）
Long press for 7.5s Forced Shutdown
Mode Switch
Shutter Button
Power Switch
Status Indicator
Advanced
Button Function & Status Indicator Specification

10
Mode
2
Function Button
Function Button Control
Power Switch Control
Power Switch
When the handle is released, double tap Power Switch
to shift mode
Single
Tap
Double
Tap
Quadruple
Tap
Long
Hold Lock Mode
Tilt and Roll Axes are locked.
Pan Axis smoothly moves with handle
Follow
Mode
Lock
Mode
Semi-Follow
mode
(Default)
Roll Axis is locked. Pan and Tilt Axes
smoothly move with handle
Tilt, Roll, and Pan Axes are locked.
Camera always keeps the current
shooting direction
The camera returns to the front
Triple
Tap
Center the
camera
(Return to the previous mode when
Function Button released)
The Switching Sequence：
Semi-Follow (Default) Follow Lock

11
Parameter
6
Specification Parameter:
1
Technical Parameter:
2
Dimensions 94*41*258 mm(Folded)
Weight 430g(15.16 oz)
Supported Camera GoPro Hero3/3+/4/5
Pan Axis: 360° (Infinite Rotation)
Tilt Axis: -45°～100°
Roll Axis: ±40°
Static Accuracy
Dynamic Accuracy
Tilt: 0.001° Tilt: 0.01°
Pan: 0.002° Pan: 0.02°
Roll: 0.001° Roll: 0.01°
·Controllable Rotation Range
·Accuracy
Pan Axis: 360° (Infinite Rotation)
Tilt Axis: -90°to 135°
Roll Axis: -44°to 90°
·Mechanical Rotation Range
Voltage 7.6 V
Battery Type Intelligent Lithium Battery
Battery Capacity 350 mAh
Energy 2.66 Wh
·Gimbal Battery
·Gimbal
Voltage 7.6V
Working Current
Static 300mA , Dynamic 2.5A
Consumption 2.5W
·Handle Battery
Voltage 7.4 V
Battery Type Intelligent Lithium Battery
Handle Battery Capacity 2000mAh
Energy 14.8Wh
·Maximum Control Speed:
Adaptive Rotation Speed（±500 °/s)

12
Other Specification
3
WARNING
1. Do not expose to fire or high heat.
2. Drop and collision will break VILTA. Please caution.
3. Not water-proof. No water or liquid cleaning agent.
4. Do not disassemble, repair or modify VILTA.
5. Gimbal and handle need to be respectively charged.
Please use charger complying with public safety regulation.
6. Do not interfere VILTA operation when working.
7. Not suitable for children.
8. Not include GoPro.
Web: www.freevisiontech.com
US Customer Support：888-898-6853
· Operating Temperature: -10℃ - 50℃(14 -122 F)
· Wearable Gimbal Working Time: 1.2h
· Handheld Gimbal Working Time: 7h
· Handle Charging Time: 2.5 h (5V,2A)
· Gimbal Charging Time: 1.5 h (5V, 1A)
· WIFI Working Frequency 2.412-2.462 GHz
1. VILTA handheld gimbal
2. Charging cable
3. Portable bag
4. Lanyard
5. User manual
6. Hero 3/3+/4 frame
Packing list
° °

www.freevisiontech.com