FREUCAMP 3J-RW-2 Guide

Roof Windows User & Installation Manuals
Model:3J-RW-2

Contents
Security considerations
02
Main components
03
Roof window use 04
Product size 07
Packing List 08
Install Instructions 09
Warranty regulations 13
Warranty card 14
Thank you for purchasing our products! Please read this manual carefully before you use the product
save it for future reference.
use
Others
1
Installation

Main Components
Roof window
1
2
3
4
5
6
7
8
9
10
11
3
1
2
4
56789
11
12
Push rod
Dome (acrylic)
Push rod arm
Upper frame
Pleated Blind
Pleated flyscreen
Ambient Light
Curtain frame
Installation frame
Latch hook
Damping block
12
Power button
10
2
Note:The version without ambient lights has no power button.

Security considerations
Please read this manual carefully before installation, and first use ,and store it in a safe
place.If you pass on the product to another person ,hand over this instruction manual along
with it.
In order to avoid property damage to users and others, please strictly follow the safety
warnings and precautions.
Symbols and meanings
Warning! Risk of causing serious injury or damage.
Attention! Not follow instruction will lead to damage.
This symbol indicates that this operation is prohibited.
This symbol indicates related information.
Warning!
1.The ambient light must be connected to a DC12V power supply and the power supply
must be correctly connected. Otherwise, the product may be damaged or cause
a fire.
1.Please close the dome of the roof window on rainy days, or open the top cover to the
ventilated gear, but you need to switch the skylight from the ventilated gear back to the
close when driving.
2.The push rod can withstand a maximum pull-down force of 30kg. Do not hang heavy
objects on the push rod.
3.When closing the dome, please pull down the push rod to the end, make sure that both
ends are stuck in the corresponding position and make a clicking sound, and make sure that
the push rod is completely locked.
Attention!
3
2.Please lock the dome of the roof window before driving, otherwise the acrylic may be
damaged when driving.
4.If faults or disturbances occur, consult a specialist workshop immediately.
5.Before starting your journey, check the roof window for damage (such as tension
cracks in the acrylic glass).
6.Do not open the window in strong wind or rain.Close the roof window if it rains or snows.
Do not leave the vehicle with the roof window open.Keep the roof window free of snow and
ice.

Roof window use
4
Ambient Light
Power button
Please turn off the power when leaving the car for a long time!
Number of
touches
Corresponding
function
One Two Three Four
1st gear 2nd gear 3rd gear Standby
Five
1st gear

5
Roof window use
5°
50°
Open the Dome
Push the push rod up to unlock and continue to slide toward the front of the car to fix the push
rod at 5° semi-ventilated gear or 50° fully-ventilated gear
Hold the middle position of the push rod when opening the roof window, this position is more
conducive to unlocking.

6
Close the Dome
Slide the push rod along the track to the end of the track (the red position in the picture)
and make a click sound, which means that the push rod is locked
Please make sure that both ends of the push rod are locked before driving!
Warning sign
Make sure both sides are locked
before driving!
Lock
Unlock
Warning sign
Roof window use

7
Product size
Unit：mm
511.5 534.5
33.5
410
119
485
400 400
Wall thickness range28-50mm
(485)
(503)
Roof mounting
surface
402
402
4-R13
Hole size
180

Packing list
8
Roof window
ST4.0×16 Phillips pan
head screws
ST3.9×32 Phillips
pan head screws U-shaped clip
Plugs 4mm nylon cable tie

Install Instructions
9
1、According to the hole size drawing on the product size page, cut the installation hole on the
roof (a solid wall ≥ 30mm wide is required around the opening so that the screw can be firmly
nailed into the wall), and you can choose to install it on the left or right( reserve a room for a
power cord ≥50mm in the side hole).
402mm
≥30mm
R13
2、After observing the position of the touch switch on the mounting frame, confirm the
direction of the mounting frame according to the reserved position of the power cord (the switch
position and the reserved line position are on the same side), and use 15 ST4.0×16 self-tapping
screws from the inside car to fix the mounting frame on the roof, and check whether the
mounting frame is fixed well to the roof.
This installation instruction takes the outlet on the left side of the car body as an example.
The frame body should be aligned with the hole in the center, with the same seams all around,
and pay attention to protect the induction spring on the circuit board during installation.
Driving direction
Driving direction

4、Apply a ring of sealant evenly in the glue groove of the upper frame of the skylight.
10
Install Roof window
3、Connect the reserved cord to the touch panel power cord and wrap it with electrical tape,
and use a 4mm wide cable tie to tie the excess power cord to the fixed point of the light guide
(there are fixed points on the left and right sides), and check whether the light strip works
normally after power on.
Pay attention to protect the spring on the circuit board during installation

Install Roof window
11
5、Clean the oil and dust on the roof mounting surface, and then install the upper part of the
skylight into the hole.
6、Use 12 ST3.9×32 self-tapping screws to fix the upper part of the roof window from inside
the car, then insert 12 plugs into the screw holes and make them flat.
Driving direction

12
Install Roof window
7、Clamp the 16 U-shaped clips onto the fins of the curtain frame and then clamp them upward into the
installation frame, and pat the curtain with your hand or a rubber hammer to make it fully clamped, and
check the curtain frame is tightly attached to the Installation frame.
8、Check whether the lights, curtains, and top cover can be used normally.

Warranty regulations
1、This product is guaranteed free of charge for one year.
2、During the warranty period, the fault caused by normal use in accordance with the
instructions (determined by the official staff of the company) will be repaired free of charge.
3、During the warranty period, in case of any of the following circumstances, a charge repair
and lifetime service will be implemented:
1）Unable to provide this warranty card and valid purchase certificate.
2）Invoice alteration.
3）Failure and damage caused by unexpected factors and improper use.
4）Failure damage caused by self-repair without permission of our company.
5）Damage caused by using power supply and voltage other than specified.
6）Products that continue to be used after the expiry of three guarantees after repair.
4、Only the above warranties are made without any other warranties, express or implied,
including the implied warranties of merchantability, rationality and adaptability for a
particular application). The company shall not be liable for any special, incidental or indirect
damages, whether in contract, in civil negligence or otherwise.
5、The period of validity of the three guarantees is calculated from the date of invoice,
excluding the time occupied by repair and waiting for repair without spare parts. During this
period, the consumer shall handle the repair, return and replacement with the invoice and
Three Guarantees certificate.
6、The consumer can choose to return, exchange or repair the product in case of performance
failure within 7 days from the date of sale.
7、If the product fails within 15 days from the date of sale, the consumer can choose to replace
or repair it.
After-sales service：
13

Warranty card
Product name：__________________
Product model：__________________
Serial number：__________________
Date of manufacture：__________________
Customer name：__________________ Contact number：____________________
Customer address：__________________________________________________
Warranty content：___________________________________________________
After sales: ___________________________________________________
Customer signature：__________________ Satisfied Dissatisfied
14
Warranty content：___________________________________________________
After sales: ___________________________________________________
Customer signature：__________________ Satisfied Dissatisfied
Warranty content：___________________________________________________
After sales: ___________________________________________________
Customer signature：__________________ Satisfied Dissatisfied