Frigidaire GLEQ332AS2 User manual

Select the temperature setting most suitable for
eachload. TheREGULAR--HIGHHEAT,PERM
PRESS--MEDIUMHEAT,KNITS--MEDIUM-LOW
HEAT*(somemodels)andDELICATES--LOW
HEAT temperature settings may be used with any
cycle setting.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
The Automatic Dry and Timed Dry cycles end with
a cool down period. The heat automatically turns
off and the load continues to tumble during the cool
downperiod.This reduces wrinklingandmakes
itemseasiertohandleduringunloading.
Dryingtime varies depending on size and
dampness of load, weight and fabric type. Room
temperature and humidity, type of installation and
electrical voltage or gas pressure can also affect
dryingtime.
OPERATINGINSTRUCTIONS
Before Operating Your Dryer
Read your dryer Use and Care Guide. It has
important safety and warranty information. It also
has many suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETYINSTRUCTIONS in yourdryer Use and
CareGuidebeforeoperatingthisappliance.
Operating Steps
ReadDryingProceduresinyourUseandCare
Guide. It explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softenersheet.
4. Close the dryer door.
5. SetTemperatureand Cycle Signal controls.
6. Turncycleselector clockwise todesired
setting.
7. Start dryer. Turn the Turn to Start control
clockwise to ON. Hold for 1-2 seconds and
release.
8. When Cycle Signal control is on, a signal
will sound at the end of the cycle.
9. Remove items immediately and hang or fold.
10. Cleanlintscreen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
To avoid fire hazard, do not use
heat to dry items containing feathers or down, foam
rubber,plastics, orsimilarly textured, rubber-like
materials. Use the Air Fluff-No Heat cycle only.
Printed in U.S.A. P/N 134065900 (0106)
*some models
*

P/N 134065900 (0106)
•DAMP DRY - This setting is best for items you
wishto partiallydry beforehanging orironing.
Select the temperature setting most suitable for
theload.
•WRINKLE-RID - If the dried loadcannot be
removed promptly at the end of the cycle, the
cycle selector will automatically advance to the
WRINKLE-RIDsetting. Unheatedtumbling
continues for 20 minutes to help reduce wrinkling.
When the Cycle Signal is on, it will sound briefly
every 5 minutes as a reminder to remove the load.
Air Fluff Cycle
This cycle provides up to 30 minutes of tumbling
without heat. Use AIR FLUFF to dry items
containingfeathers or down, foam rubber,plastics,
or similarly textured, rubber-like materials, to
freshen clothing, pillows or blankets, or to dust
draperies.
Timed Dry Cycle
This cycle provides up to 90 minutes of drying time
at the temperature selection of your choice.
Automatic Dry Cycle
•TOWELS - This setting is best for towel loads.
SelecttheREGULAR--HIGHHEATtemperature
setting.
•REGULAR - This setting is best for cotton items.
SelecttheREGULAR--HIGHHEATtemperature
setting.
•DELICATES/PERM PRESS - This setting is best
for delicate, knit, or perm press items. Select the
PERMPRESS--MEDIUMHEATtemperature
setting for permanent press items, the KNITS---
MEDIUM-LOWtemperature settingfor mostknit
items,or the DELICATES--LOWHEAT
temperature setting for delicate items.
• Occasionally a load may seem too damp or
overdried at the end of the cycle. To increase
drying time for similar loads in the future, set the
cycle selector on the indicator line to the left of
theTOWELS,REGULAR,or DELICATES/PERM
PRESS setting. For loads requiring less drying
time, set the cycle selector on the indicator line to
theright.
Cycle Selection (continued) Energy Saving Tips
• Keep the lint screen clean and exhaust the dryer
correctly.
• Sortlaundryproperlyandselectproper
temperature and cycle settings. Choose the
Automatic Dry cycle whenever possible for
accuratedrying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a partially
dryload,andoverdrying.
• Dry one load after another to take advantage of a
warmdryer.
• Openingthe door needlessly causes warm air to
escape,which prolongsdrying time.
• If possible, use the dryer on low humidity days.
• Installthedryerinanareawheretheroomtemperature
is at least 45°F (7°C).
*some models
*