Frigidaire CFHT1713LZ1 User manual

OF CONTENT_
Important Safety Instructions ................ 2 Controls ............................................................... 9
Installation .......................................... 4 N_k_al _pen ring Sounds and Sigh_ .................... I0
Door Removal Instructions ..................................... 5 _re and Cle_ning ............................................... 11
Handle Installation ................................................ 6 Before _ou _ LII................................................... I2
Connecting Water Supply ....................................... 8 Major Appliance Warranty ................................... 1_
Ice Service ........................................................... 9
c
E_
www.fdgidaire.com USA1-800-944-9044 www.fdgidaire.ca Canada 1-800-265-8352

Pleasereadallinstructionsbeforeusingthis
refrigerator.
For your Safety
o DO NOT store or use gasoline, or other flammable
liquids in the vicinity of this or any other appliance.
Read product labels for warnings regarding
flammability and other hazards.
DO NOT operate the refrigerator in the presence of
explosive fumes.
Avoid contact with any moving parts of automatic
ice maker.
Remove all staples from the carton. Staples can
cause severe cuts, and also destroy finishes if they
come in contact with other appliances or furniture.
Definitions
This isthe safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury
or death.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
Doors
Handles are secure and tight
Door seals completely to cabinet on all sides
13 Freezer door is level across the top
Leveling
Refrigerator is level, side-to-side and tilted
1/4" (6mm) front-to-back
13 Toe grille is properly attached to refrigerator
13 Cabinet is setting solid on all corners
Electrical Power
13 House power turned on
13 Refrigerator plugged in
Ice Maker
13 House water supply connected to refrigerator
13 No water leaks present at all connections -
recheck in 24 hours
13 Ice maker is turned ON
13 Ice & water dispenser operates correctly
13 Front filter must be flush with filter housing
(select models)
Final Checks
Q Shipping material removed
i::::l Fresh food and freezer temperatures set
I::1 Crisper humidity controls set
I:::1 Registration card sent in
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
IMPORTANT indicates installation, operation or
maintenance information which is important but not
hazard-related.

Child Safety
Destroy or recycle the carton, plastic bags, and any
exterior wrapping material immediately after the
refrigerator is unpacked. Children should NEVER
use these items to play. Cartons covered with rugs,
bedspreads, plastic sheets or stretch wrap may become
airtight chambers, and can quickly cause suffocation.
Proper Disposal of your Refrigerator or
Freezer
Risk of child entrapment
Child entrapment and suffocation are not problems of the
past. Junked or abandoned refrigerators or freezers are
still dangerous - even if they will sit for "just a few days".
If you are getting rid of your old refrigerator or freezer,
please follow the instructions below to help prevent
accidents.
Proper Disposal of Refrigerators/Freezers
We strongly encourage responsible appliance recycling/
disposal methods. Check with your utility company or
visit www.recyclemyoldfridge.com for more information
on recycling your old refrigerator.
Before you throw away
your old refrigerator/
freezer:
o Remove doors.
Leave shelves in place
so children may not
easily climb inside.
Have refrigerant
removed by a qualified
service technician.
These guidelines must be followed to ensure that
safety mechanisms in this refrigerator will operate
Electrical information
The refrigerator must be plugged into its
own dedicated 115 Volt, 60 Hz,, 15 Amp, AC
only electrical outlet, The power cord of the
appliance isequipped with a three=prong grounding
plug for your protection against electrical shock
hazards. It must be plugged directly into a properly
grounded three prong receptacle. The receptacle
must be installed in accordance with local codes
and ordinances. Consult a qualified electrician.
Avoid connecting refrigerator to a Ground
Fault Interrupter (GFI) circuit. Do not use an
extension cord or adapter plug.
If the power cord is damaged, it should be replaced
by an authorized service technician to prevent any
risk.
Never unplug the refrigerator by pulling on the
power cord. Always grip the plug firmly, and
pull straight out from the receptacle to prevent
damaging the power cord.
Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
Performance may be affected if the voltage varies
by 10% or more. Operating the refrigerator with
insufficient power can damage the compressor.
Such damage is not covered under your warranty.
Do not plug the unit into an electrical outlet
controlled by a wall switch or pull cord to prevent
the refrigerator from being turned off accidentally.
Pressing and holding the On/Off button for three (3)
seconds, located on the left side of the temperature
control panel (Electronic controls), or turning the
Freezer and Fresh Food controls to "O" (Mechanical
controls) will disable your refrigerator's cooling system,
but does not disconnect the power to the light bulb and
other electrical components. To turn off power to your
refrigerator you must unplug the power cord from the
electrical outlet.
Grounding type
wail receptacle
SDO not, under "_
| any circumstances,
_1 cut, remove, /
or bypass the /
_l_gr°unding prong_
-p gg pug _lt,_
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.

ThisUse&CareGuideprovidesgeneraloperating
instructionsforyourmodel.Usetherefrigeratoronlyas
instructedinthisUse&CareGuide.Beforestarting the
refrigerator, follow these important first steps,
Location
- Choose a place that is near a grounded electrical
outlet. Do Not use an extension cord or an
adapter plug.
If possible, place the refrigerator out of direct
sunlight and away from the range, dishwasher or
other heat sources.
The refrigerator must be installed on a floor that is
level and strong enough to support a fully loaded
refrigerator.
Consider water supply availability for models
equipped with an automatic ice maker. If you do
not hook up water to the refrigerator, remember to
turn the ice maker off.
Leveling
All four corners of your refrigerator must rest firmly on a
solid floor. Your refrigerator is equipped with adjustable
front rollers or front leveling screws to help level your
unit.
To level your refrigerator:
1 Remove toe grille.
2 Use fiat-blade screwdriver or 3/8" socket wrench
to adjust front rollers. Use adjustable wrench to
adjust leveling screws.
Do Not install the refrigerator where the temperature
will drop below 55°1: (13°C) or rise above 110o1:
(43°C). The compressor will not be able to maintain
proper temperatures inside the refrigerator.
Do Not block the toe grille on the lower front of your
refrigerator. Sufficient air circulation is essential for the
proper operat!on of y°ur refrigerat Or...........................................................................................................................
Raise the front of the refrigerator enough so the doors
close freely when opened halfway. The refrigerator
should slope 1/4" to 1/2" from front to back. Then
level the refrigerator from side-to-side.
Installation
Installation clearances
Allow the following clearances for ease of
installation, proper air circulation, and plumbing
and electrical connections:
Sides & Top 3/oinch
Back I inch
Raise
Adjustable Front Roller
(some models)
D
Raise
Stationary Front Roller
with Leveling Screw
(some models)
If your refrigerator is placed with the door hinge side
against a wall, you may have to allow additional space
so the door can be opened wider.

Top Hinge Top Hinge
Cover Front Cover Rear
Screw _ _ Screw
To0
Screw_
Tools Necessary:
Phillips '_ Head
AND
3/8"Fixed
Wrench
The direction in which your refrigerator doors open (door swing) can be reversed, from left to right or right to left, by
moving door hinges from one side to the other, eversing the dOOr g should be performed by a qual!fied person................
Before you begin, turn the refrigerator temperature control to "0" and remove the electrical power cord from the wall
outlet. Remove any food from door shelves.
Door removal and reversal instructions:
_ Top Hinge 1
Cover 2Remove toe grille.
Remove top hinge cover. Trace around the hinge with a soft lead pencil. This
makes reinstallation easier. Remove top hinge and lift door off center hinge pin.
Set door aside.
Top Hinge
Center
17
3Unscrew center hinge pin using adjustable wrench and save for reassembly.
Ensure plastic washer stays on hinge pin.
4 Lift refrigerator door off of bottom hinge and set aside.
5Remove center hinge and shim by removing inside screw and loosening two
outside screws enough to allow hinge and shim to slide out. Tighten screws.
6 Loosen two outside screws on opposite side of refrigerator, remove inside screw
and install center hinge.
7Remove two screws on bottom hinge with 3/8" socket wrench.
8Install bottom hinge on opposite side with the two screws removed from step 7.
9 Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to other hole
in hinge and tighten with adjustable wrench.
10 Reverse door handles (see instruction on next page).
11 Move freezer and refrigerator door stops to opposite side. Before starting screws,
use an awl to puncture the foam.
12 Position refrigerator door onto bottom hinge pin and screw center hinge pin through
center hinge into top of door. Close refrigerator door to help align hinge hole.
Tighten center hinge pin with adjustable wrench.
Remove cabinet and hinge hole plugs
Lower freezer door onto center hinge
Close freezer door. Have an assistant
tightening screws to install top hinge.
Flip toe grille and reinstall.
Plug in electrical power cord and turn
position. Adjust setting as necessary.
and move to opposite side.
pin.
lift up on opposite side of door while
refrigerator temperature control to center

Wear gloves and use extreme CAUTION when installing
these handles. The rounded end of the handles may be
To ensure proper installation of handles, please review
these instructions and illustrations thoroughly prior to
installing the handles.
Additionally, before installing the door handles, make
sure the door swing is correct. Your model will have
either a right hand or left hand door swing. Follow
instructions in the Use & Care Guide to reverse the
doors, if necessary.
To attach metal refrigerator handle;
1 Place rounded part of handle onto shoulder screw
on face of door and align the two (2) holes in top
of handle with the two (2) holes in top of door. Do
not tighten the set screw yet.
2 Install the two (2) screws into the top of the handle.
3 Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
Shoulder
Plug
To attach metal freezer handle"
1 Place rounded part of handle onto shoulder screw
on face of door and align the two (2) holes in
bottom of handle with the two (2) holes in bottom
of door. Do not tighten the set screw yet.
2 Install the two (2) screws into the bottom of the
handle.
3Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
Stainless Steel Models
IMPO NT
Stainless steel handles and doors are not reversible.

To attach plastic refrigerator handle:
1 Place top of handle over dovetail screw, pull handle
straight down until handle is aligned with screw
holes on top of door.
2 Secure top of handle with two screws.
To reverse refrigerator/freezer handles:
Handles may be easier to reverse while doors are off.
Reverse freezer and refrigerator handles as shown.
Lock Handle
over
Dovetail Screw
/.f/
To attach plastic freezer handle:
1 Place top of handle over dovetail screw, pull handle
straight up until handle is aligned with screw holes
on bottom of door.
2 Secure bottom of handle with two screws.
Lock Handle
over
Dovetail Screw
Be sure doors are set aside in a secure position where
they cannot fall and cause personal injury,

Toavoidelectricshock,whichcancausedeathor
severepersonalinjury,disconnecttherefrigeratorfrom
electricalpowerbeforeconnectingawatersupplylineto
ToAvoidPropertyDamage:
• CopperorStainlessSteelbraidedtubingisrecommended
forthewatersupplyline.Watersupplytubingmadeof
1/4inchplasticisnotrecommendedtobeused.Plastic
tubinggreatlyincreasesthepotentialforwaterleaks,and
themanufacturerwillnotberesponsibleforanydamage
ifplastictubingisusedforthesupplyline.
DONOTinstallwatersupplytubinginareaswhere
temperaturesfallbelowfreezing.
Chemicalsfromamalfunctioningsoftenercandamage
theicemaker.Iftheicemakerisconnectedtosoft
water,ensurethatthesoftenerismaintainedand
Ensurethatyourwatersupplylineconnectionscomply
withalllocalplumbingcodes.
Before Installing The Water Supply Line, You Will Need:
-Basic Tools: adjustable wrench, flat-blade screwdriver,
and PhillipsTM screwdriver
Access to a household cold water line with water
pressure between 30 and 100 psi.
A water supply line made of 1/4inch (6.4 mm) OD,
copper or stainless steel tubing. To determine the
length of tubing needed, measure the distance
from the ice maker inlet valve at the back of the
refrigerator to your cold water pipe. Then add
approximately 7 feet (2.1 meters), so the refrigerator
can be moved out for cleaning (as shown).
A shutoff valve to connect the water supply line to your
household water system. DO NOT use a selFpierdng
type shutoff valve.
A compression nut and ferrule (sleeve) for connecting
a copper water supply line to the ice maker inlet valve.
To Connect Water Supply Line To Ice Maker [nlet Valve
1. Disconnect refrigerator from electric power source.
2. Placeend of water supply line into sink or bucket.
Turn ON water supply and flush supply line until
water isclear. Turn OFF water supply at shutoff valve.
3. Remove plastic cap from water valve inlet and
discard cap.
4. If you use copper tubing -Slide brass compression
nut, then ferrule (sleeve) onto water supply line.
Push water supply line into water valve inlet as far
as it will go (1/4inch/6.4 mm). Slide ferrule (sleeve)
into valve inlet and finger tighten compression nut
onto valve. Tighten another half turn with a wrench
DO NOT over tighten. See Figure 1.
If you use stainless steel tubing -The nut and
ferrule are already assembled on the tubing. Slide
compression nut onto valve inlet and finger tighten
compression nut onto valve. Tighten another half turn
with a wrench; DO NOT over tighten. See Figure2.
5. With steel clampand screw,securewater supply line
(coppertubing only)to rear panelof refrigeratDrasshown.
6. Coil excess water supply line (copper tubing only),
about 21/2turns, behind refrigerator as shown and
arrange coils so they do not vibrate or wear against
any other surface.
7. Turn ON water supply at shutoff valve and tighten
any connections that leak.
8. Reconnect refrigerator to electrical power source.
9. To turn ice maker on, lower wire signal arm (side
mounted) or set the ice maker's On/Off power
switch to the "T' position (rear mounted).
_Steel Clamp
Brass
Compression
Ferrule
Copper
water line
er VaJve
Bracket
Include enough tubing in loop to allow
moving refrigerator out for cleaning.)
I _Steel
Clamp
I
I
'_i] Steel
V/
_ _---Valve Inlet
_at_r Valw
-- 6 ft. Stainless Steel water line
ousehold water supply
Figure 1 Figure 2
Checkwith your local building authority for recommendations
on water linesand associated materials prior to installing
your new refrigerator, Depending on your local/state
building codes, Frigidaire recommends for homes with
existing valves itsSmart Choice®water line kit 5305513409
(with a 6 ft. StainlessSteel Water Line) and for homes
without an existing valve, Frigidaire recommends its Smart
Choice wateP line kit 5305510264 (with a 20 ft. Copper
Water Line with self-tapping saddlevalve). Pleaserefer to
vwvw.frigidaire.com/store for more information.
After connecting the water supply, refer to "How to Prime
the Water Supply System" for important information about
priming an empty water supply system.
Your refrigerator'swater supply system includesseveraltubing
lines,a water filter, a water valve,and a water tank. Toensure
that your water dispenserworks properly,this system must
be completely filled with water when your refrigerator isfirst
........._n _ the h_ho!d ...................................................................................................................................................

Ifyourrefrigeratorhasanautomaticicemaker,noicewill
beproducedduringthefirst24hoursofoperation.Air
innewplumbinglinesmaycausetheicemakertocycle
twoorthreetimesbeforemakingafulltrayofice. With
nousage,it willtakeapproximatelyonetotwodaystofill
theicecontainer.
Newplumbingconnectionsmaycausethefirstproduction
oficecubestobediscoloredorhaveanoddflavor.
Discardicemadeduringthefirst24hours.
Automaticicemakersarealsooptionalaccessoriesthat
maybeinstalledin mostmodelsatanytime. Callyour
localdealerforinformation.
Turning your Ice
Haker On
After the plumbing
connections have been
completed, the water
supply valve must be
opened. Place the ice
container under the ice
maker, pushing it as
far back as possible.
Lower the wire signal
arm to its "down" or
ON position.
Turning your Ice Haker Off
To stop the ice maker, lift the wire signal arm until it
clicksand locks in the "up" or OFF position. The ice
maker also turns off automatically when the ice container
is full.
Your ice maker is shipped from the factory with the
wire signal arm in the ON position. To ensure proper
function for your ice maker, hook up water supply
immediately or turn ice maker OFF by lifting the wire
signal arm until it clicks and locks in the UP position.
If the ice maker is not turned off and the water
supply is not connected, the water valve will
; make a loud chattering noise,
Cool Down Period
To ensure safe food storage, allow the refrigerator to
operate with the doors closed for at least 8 to 12 hours
before loading it with food.
Refrigerator &Freezer Controls
When first turning refrigerator on, move refrigerator
and freezer controls to Normal. This is the
recommended initial setting. After 24 hours, adjust the
controls as needed.
Freezer Control Refrigerator Control
Tern peratu re Adj ustrnent
- Adjust temperature gradually: move the knob in
small increments, allowing the temperature to
stabilize.
Turning the refrigerator control will change temperatures
in both compartments. For example, if the refrigerator
control is turned to a colder setting, the freezer
control may have to be adjusted to a warmer setting.
Turning the freezer control will change only the freezer
temperature.
To maintain temperatures, a fan circulates air in the
refrigerator and freezer compartments. For good
circulation, do not block cold air vents with food items.
Turning the refrigerator temperature control to "0"
turns off the compressor and prevents the refrigerator
from cooling, but does not disconnect the power to the
light bulb and other electrical components. To turn off
power to your refrigerator, you must unplug the power
cord from the wall outlet.

Understanding the Sounds you may Hear
Your new, high=efficiency refrigerator may introduce
unfamiliar sounds. These sounds normally indicate
your refrigerator is operating correctly. Some surfaces
on floors, walls, and kitchen cabinets may make these
sounds more noticeable.
Rigid foam insulation isvery energy efficient, but is not
a sound insulator. ................................................................................................................................................................................................................................................
Following is a list of major components in your
refrigerator and the sounds they can cause:
AEvaporator Refrigerant through the evaporator
may create a boiling or gurgling sound.
BEvaporator fan You may hear air being forced
through the refrigerator by the evaporator fan.
C Defrost heater During defrost cycles, water
dripping onto the defrost heater may cause a
hissing or sizzling sound. After defrosting, a
popping sound may occur.
During the automatic defrost cycle, you may notice a
red glow in the vents on the back wall of your freezer
compartment. This is normal during the defrost cycle.
DAutomatic ice maker When ice has been
produced, you will hear ice cubes falling into
the ice bin. The ice maker will produce 2.5 to 3
pounds of ice every 24 hours depending on usage
conditions.
E Electronic control & automatic defrost
control These parts can produce a snapping or
clicking sound when turning the cooling system on
and off.
F Condenser fan You may hear air being forced
through the condenser.
GCompressor Modern, high=efficiency compressors
run much faster than in the past. The compressor
may have a high=pitched hum or pulsating sound.
HWater valve Makes a buzzing sound each time it
opens to fill the ice maker.
I Drain pan (not removable) You may hear water
dripping into the drain pan during the defrost cycle.
J Condenser May create minimal sounds from
forced air.

Protecting your investment
Keeping your refrigerator clean maintains appearance and prevents odor build-up. Wipe up any spills immediately and clean the
freezer and fresh food compartments at least twice a year. When cleaning, take the following precautions:
• Never use CHLORIDE or cleaners with bleach to clean stainless steel.
• Do not wash any removable parts in a dishwasher.
• Always unplug the electrical power cord from the wall outlet before cleaning.
• Remove adhesive labels by hand. Do not use razor blades or other sharp instruments which can scratch the appliance surface.
• Do not remove the serial plate.
Do not use abrasive cleaners such as window sprays, scouring cleansers, brushes, flammable fluids, cleaning waxes, concentrated
detergents, bleaches or cleansers containing petroleum products on plastic parts, interior doors, gaskets or cabinet liners. Do not
use paper towels, metallic scouring pads, or other abrasive cleaning materials or strong alkaline solutions.
If you set your temperature controls to turn off cooling, power to lights and other electrical components will continue until you
unplug the power cord from the wall outlet.
, Pull the refrigerator straight out to move it. Shifting it from side to side may damage flooring. Be careful not to move the
refrigerator beyond the plumbing connections.
• Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
If you store or move your refrigerator in freezing temperatures, be sure to completely drain the water supply system. Failure to do so
could result in water leaks when the refrigerator is put back into service. Contact a service representative to perform this operation.
Care & Cleaning Tips
Part What To Use I Tips and Precautions
Interior & Door • Soap and water
Liners • Baking soda and water
I
Door Gaskets • Soap and water
Drawers & Bins • Soap and water
Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to
wring excess water out of sponge or cloth before cleaning around
controls, light bulb or any electrical part.
wipe gaskets With a €lean s0ft clothl
Use a soft cloth to clean drawer runners and tracks.
Glass Shelves , soap and Ware[ Allow glass to warm to room temperature before immersing in warm water.
• Gassceaner
• Mild liquid sprays
Toe Grille • Soap and water Vacuum dust from front of toe grille. Remove toe grille (see Installation
• Mild liquid sprays Instructions). Vacuum backside, wipe with sudsy cloth or sponge. Rinse
• Vacuum attachment and dry.
Exterior 8_ , Soap and water Do n0t Use commercial household Cleaners Containing ammonia, bleach or
Handles * Non Abrasive GlassCleaner alcohol to clean handles. Use a soft cloth to clean smooth handles. DO
I NOT use a dry cloth to clean smooth doors,
Exterior & • Soap and water Never use CHLORIDE or cleaners with bleach to clean stainless steel.
Handles
(Stainless Steel • Stainless Steel Cleaners Clean stainless steel front and handles with non-abrasive soapy water and
Models Only) a dishcloth. Rinse with clean water and a soft cloth. Use a non-abrasive
stainless steel cleaner. These cleaners can be purchased at most home im-
provement or major department stores. Always follow manufacturer's in-
structions. Do not use household cleaners containing ammonia or bleach.
NOTE: Always clean, wipe and dry with the grain to prevent
scratching. Wash the rest of the cabinet with warm water and mild liquid
detergent. Rinse well, and wipe dry with a clean soft cloth.
Replacing Light unplug refrigerator J
Bulbs ,, Wear gloves CAUTION: Wear gloves when replacing light bulbs to avoid get=
,Remove !ight cove r Ling cut.
Replace old bu!b Use same wattage when rep!acing bu!b ............................................
I * Replace light cover
• Plug in the refrigerator

1-800-944-9044 (United States)
1-800-265-8352 (Canada)
Visit our web site at
www.frigidaire.com.
Common
Occurrences
Refrigeratordoes not run.
Freezer temperature too cold.
Refrigeratortemperature is
satisfactory.
Refrigeratortemperature too cold.
Freezer temperature is satisfactory.
Refrigerator is noisy or vibrates.
Odors in refrigerator.
Cabinet light not working.
Automatic ice maker not working.
(some models)
Before calling for service, review this list. It may save you time and expense. This
list includes common occurrences that are not the result of defective workmanship
or materials in this appliance.
• Ensure plug is tightly pushed into electrical outlet.
• Check/replace fuse with a 15 amp time-delay fuse. Reset circuit breaker.
• The temperature control is turned to "O".
• Refrigerator may be in defrost cycle. Wait 20 minutes and check again.
• Set freezer control to a warmer setting until freezer temperature is satisfactory.
Allow 24 hours for the temperature to stabilize.
Set refrigerator control to a warmer setting. Allow 24 hours for temperature to
stabilize. Then check freezer temperatures and adjust as needed.
•The cabinet is not level.
• Floor is weak.
• See Normal Operating Sounds and Sights section.
• Interior needs to be cleaned.
• Foods that produce odors should be covered or wrapped.
• Replace light bulb.
• Ensure plug is tightly pushed into electrical outlet.
• Light switch may be stuck. Push in light switch, located on the refrigerator
control box, to release.
• Ensure the Wire Signal Arm is not in UP position.
• Ice maker should produce 2.5 to 3 pounds of ice in a 24 hour period.
• Water supply is turned off.
• Water pressure is too low.
• The freezer is not cold enough.

Your appliance is covered by a one year limited warranty. For one year from your original date of
purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove
to be defective in materials or workmanship when such appliance is installed, used and maintained in
accordance with the provided instructions.
Exclusions This warranty does not cover the following"
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
2. Product that has been transferred from its original owner to another party or removed outside the USA or
Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased "as-is" are not covered by this warranty.
5. Food loss due to any refrigerator or freezer failures.
6. Products used in a commercial setting.
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances
not in ordinary household use or used other than in accordance with the provided instructions.
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,
etc.,which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or
knobs, handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors,
cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR
OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT
BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSES RESULTING FROM ANY BREACH OF THIS WRI-i-i-EN LIMITED WARRANTY OR ANY IMPLIED
WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRI-i-i-EN WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
If You Need
Service Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone
numbers below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances
North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp.
Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under
this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described
or illustrated are subject to change without notice.
USA
1.800.944.9044
Electrolux Major Appliances
North America
10200 David Taylor Drive
Charlotte, NC 28262
Electrolux
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
LSV 3E4