FritsJurgens Top pivot Reversed Guide

TOP PIVOT REVERSED
MILLING AND MOUNTING MANUAL

2
BOX CONTENTS
COMPONENTS
Milling and mounting instructions bottom pivot → main manual
SYSTEM OVERVIEW
2
3
4
1
13442
1 Top pivot Reversed
2 Cover plate
3 Receiver
4 Adapters with filler plates (optional)
(optional)

3
Situation in steel/aluminum
→ page 6
MILLING INSTRUCTIONS
MOUNTING INSTRUCTIONS
Situation in wood → page 4

4
MILLING
PREPARING THE DOOR AND CEILING/SILL
PIVOT AXIS
PIVOT AXIS
193.6 23.4
23.4
240.4
45.2
7 38.2
193.6
4x R6.2
4x R8.2
32.4
32.4
7
45.2
23.4 23.4
≥130
614
≥40
70.4
32.4
Ø23.4
70.4
≥130
32.4
6
≥ 40mm
20
Ø 23.4 Ø 23.4
4x R8.2

5
Top side B
Bottom side A
Side view
Short side
mounting pin
turned in
Short side
mounting pin
turned out
Cover plate
Cover plate
Bottom side A
without cover
plate
A
B
4521.9
32
7 38
6 381
15
120 120
240
32
18
4x R8
29.5 181 29.5
32
7.5
29.5 181 29.5
18 77
7.5
4x R8
55 130 55
TOP PIVOT REVERSED
Top pivot Reversed
Receiver
70
32
7.5 55 7.5
23
614
4x R8
Ø
5.5
20
32
23.523.5
10.4
COMPONENTS

6
1 Affix the Top pivot Reversed.
3 Position the door on the floor plate as shown in
the main manual.
MOUNTING
16x
4 Extend the pivot with Allen key 5. Turn the Allen
key 16 times to fully extend the pivot.
2 Identify the adjusting screw that extends the
pivot.

7
TOP PIVOT REVERSED
FINE-TUNING THE CLOSING SEAM
1 Check if the door is aligned parallel to the ceiling
and the wall.
2 Open the door. Use Allen key 5, and the
adjustment screw marked until the door is
aligned parallel to the ceiling and the wall.
3 Affix the magnetic cover plate.

FRITSJURGENS INTERNATIONAL
A. Einsteinlaan 1
9615 TE Kolham
The Netherlands
[phone]
inf[email protected]om
FRITSJURGENS ITALIA (COMMERCIAL OFFICE)
Via Marsilio Ficino 22
50132 Firenze
Italy
[phone]
inf[email protected]om
FRITSJURGENS CONSULTING FZE (REGIONAL SALES OFFICE)
Premises No. HD67
Floor 25
Sheikh Rashid Tower
Dubai World Trade Centre
Dubai UAE
FJ.IN.TP-R.EN.2022
copyright © FritsJurgens®
02-03-2023