Wireless LAN Connections
You can establish wireless LAN connections in three simple ways.
AVM Stick&Surf (Page 5)
Stick&Surf is especially simple and secure. With Stick&Surf the FRITZ!WLANUSB
StickN adopts the security settings of a FRITZ!Box and automatically establishes a
secure wireless LAN connection.
or
WPS Quick Connection and Manual Connection (Page 6)
The FRITZ!WLANUSB StickN can be connected with the wireless access point
via WPS. WPS (Wi-Fi Protected Setup) is a fast and simple way to establish a
secure connection between wireless LAN devices. WPS is supported by all current
FRITZ!Box models with wireless LAN and by many wireless LAN access points from
other manufacturers. See the documentation for your wireless access point.
or
Direct Connections (Page 8)
A direct connection, or adhoc network, is a wireless LAN consisting of several
participants that does without a wireless access point by enabling simple, direct
data exchange between the network devices.
Establishing a Wireless Connection with Stick&Surf
With Stick&Surf you can establish a secure wireless connection to your FRITZ!Box
automatically using the USB port.
Establishing a Connection
1. Insert the FRITZ!WLANUSB StickN in
the FRITZ!Box.
2. The Info LED on the FRITZ!Box flashes.
Wait until the Info LED stops flashing
and remains lit up.
3. Remove the FRITZ!WLANUSB StickN.
4. Insert the FRITZ!WLANUSB StickN in
your booted computer.
5. The driver installation is started.
6. Click AVM FRITZ!WLANUSB StickNv2
Installation and confirm the subse-
quent queries. The FRITZ!WLANUSB
StickN is installed.
7. The Stick&Surf logo appears and
the connection to your FRITZ!Box is
established automatically. Please note
the information on the FRITZ!WLAN
software on page 9.
Flashes briefly,
then remains lit
