Fritz! POWERLINE 546E Quick start guide

FRITZ!Powerline
546E
© AVM GmbH · Alt-Moabit 95 · 10559 Berlin · Telefon [phone] · [e-mail]
www.avm.de
Connecting
and Operating
411298001

FRITZ!Powerline 546E 2
Table of Contents
1 Security Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2 Conventions in the Manual . . . . . . . . . . . . . . . . . . . . . . . 8
2.1 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Highlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3 FRITZ!Powerline 546E . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.1 This Is FRITZ!Powerline 546E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.2 Powerline: Data Transmission over the Electrical Wiring. . . . . . . . . . 9
3.3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Buttons, LEDs and LAN Ports . . . . . . . . . . . . . . . . . . . . . 10
4.1 Buttons and LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.2 LAN Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5 Integrated Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.1 Maximum Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.2 Using Multi-Outlet Strips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.3 Intelligent Switching and Consumption Measurement . . . . . . . . . . 12
6 Using FRITZ!Powerline in the Powerline Network . . . . . 13
6.1 What Is a Powerline Network? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.2 Expanding a Powerline Network with FRITZ!Powerline 546E. . . . . . 14
6.3 Configuring a New Powerline Network with FRITZ!Powerline 546E. 15
7 Connecting PCs, Tablets, Smart TVs and Other Devices . 17
7.1 Connecting a Network Device with LAN Cable . . . . . . . . . . . . . . . . . 17
7.2 Connecting a Hub or Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
7.3 Connecting Network Devices Wirelessly. . . . . . . . . . . . . . . . . . . . . . 18
7.4 Adopting the Wireless LAN Registration Data of the FRITZ!Box. . . . 19
8 Application Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
8.1 Wireless Internet Access from Anywhere in the Home . . . . . . . . . . 20
8.2 Connecting Network Devices by Cable and by Wireless LAN. . . . . . 21

FRITZ!Powerline 546E 3
9 User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.1 Settings and Functions in the User Interface . . . . . . . . . . . . . . . . . . 22
9.2 Opening the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.3 Special Case: Multiple FRITZ!Powerline Devices with Wireless LAN.22
9.4 Special Case: Another Internet Router (No FRITZ!Box). . . . . . . . . . . 23
9.5 Special Case: No Connection to the Home Network . . . . . . . . . . . . 23
10 Switching the Socket On and Off Manually . . . . . . . . . . 24
10.1 Switching On and Off with the Button . . . . . . . . . . . . . . . . . . . . . . . 24
10.2 Switching On and Off in the User Interface . . . . . . . . . . . . . . . . . . . 24
10.3 Switching On and Off with FRITZ!Fon . . . . . . . . . . . . . . . . . . . . . . . . 25
10.4 Switching On and Off with MyFRITZ!App . . . . . . . . . . . . . . . . . . . . . 25
11 Configuring Automatic Switching for Socket . . . . . . . . . 26
11.1 What Kind of Automatic Switching Can Be Set? . . . . . . . . . . . . . . . . 26
11.2 Configuring Automatic Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
12 Measuring Power Consumption . . . . . . . . . . . . . . . . . . . 28
13 Updating FRITZ!OS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
13.1 What Is FRITZ!OS? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
13.2 Performing a FRITZ!OS Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
14 Operating Modes: Powerline Bridge, WLAN Bridge
and LAN Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
14.1 Which Operating Mode Do I Configure? . . . . . . . . . . . . . . . . . . . . . . 30
14.2 Wireless Data Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
14.3 WLAN Bridge Operating Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
14.4 LAN Bridge Operating Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
15 The FRITZ!Powerline Software . . . . . . . . . . . . . . . . . . . . 36
15.1 Downloading the FRITZ!Powerline Software. . . . . . . . . . . . . . . . . . . 36
15.2 Settings and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

FRITZ!Powerline 546E 4
16 Changing the Network Password . . . . . . . . . . . . . . . . . . 37
16.1 When Must the Network Password Be Changed?. . . . . . . . . . . . . . . 37
16.2 Changing the Network Password with the FRITZ!Powerline Software37
17 Optimizing Powerline Transmission Capacity . . . . . . . . 39
17.1 Finding the Ideal Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
17.2 Avoiding Multi-Outlet Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
18 Loading Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . 40
18.1 Restoring Factory Settings in the User Interface . . . . . . . . . . . . . . . 40
18.2 Loading the Factory Settings Using the Buttons . . . . . . . . . . . . . . . 40
19 Security in the Powerline Network . . . . . . . . . . . . . . . . . 41
19.1 FRITZ!Powerline Always Password Protected . . . . . . . . . . . . . . . . . . 41
19.2 No Access from Outside Permitted . . . . . . . . . . . . . . . . . . . . . . . . . . 41
19.3 Changing the Network Password . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
20 Technical Information on Operating FRITZ!Powerline . . 42
20.1 Electromagnetic Interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
20.2 Electricity Meter, Fuse Box, and GFCI Ground Fault Circuit
Interrupter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
20.3 Using FRITZ!Powerline with Cross Blocking in the Power Supply . . 43
20.4 Up to Four Powerline Networks in a Circuit. . . . . . . . . . . . . . . . . . . . 43
21 Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . 44
22 Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
22.1 Documentation on the FRITZ!Powerline . . . . . . . . . . . . . . . . . . . . . . 46
22.2 AVM Knowledge Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
22.3 Assistance from the Support Team . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Legal Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Legal Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Declaration of CE Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Disposal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

FRITZ!Powerline 546E 5
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

FRITZ!Powerline 546E 6
Security Instructions
1 Security Instructions
Be sure to observe the following security instructions to pro-
tect yourself and the FRITZ!Powerline from harm.
•FRITZ!Powerline has no on/off switch. This means it
must be possible to disconnect FRITZ!Powerline from the
power supply at any time.
–Insert FRITZ!Powerline into an electrical outlet that is
easy to reach.
•Moisture and liquids that find their way into FRITZ!Pow-
erline can cause electric shocks or short circuits.
–Only use FRITZ!Powerline indoors.
–Never let liquids get inside FRITZ!Powerline.
•The FRITZ!Powerline contains hazardous components
and should only be opened by authorized repair techni-
cians.
–Do not open the FRITZ!Powerline housing.
–If FRITZ!Powerline needs to be repaired, please take it
to a specialized vendor.
•Dust, moisture, vapors and caustic cleaners or solvents
can damage FRITZ!Powerline.
–Protect FRITZ!Powerline from dust, moisture and va-
pors.
–Install FRITZ!Powerline at a dust-free, dry location.
–Remove FRITZ!Powerline from the mains before
cleaning.
–Clean FRITZ!Powerline with a slightly moist, lint-free
cloth.
•Heat accumulation can lead to overheating of FRITZ!Pow-
erline and subsequently damage FRITZ!Powerline.
–Install FRITZ!Powerline in a place that is protected
from direct sunlight, and provide for sufficient venti-
lation.

Security Instructions
FRITZ!Powerline 546E 7
–Avoid operating FRITZ!Powerline in the direct vicinity
of a radiator or heating unit.
–The slits and openings on the housing of FRITZ!Pow-
erline are for ventilation and must not be blocked or
covered.
•Overloaded outlets, extension cords and power strips
can lead to fires or electric shocks.
–Always plug FRITZ!Powerline directly into a wall out-
let.
–Avoid using socket strips and extension cords if at all
possible.
–If you would like to use multi-outlet power strips,
then plug FRITZ!Powerline into the wall outlet and the
multi-outlet strip in FRITZ!Powerline’s integrated
socket.
–Do not connect multiple FRITZ!Powerline adapters
with each other.
•Overloading the integrated outlet can damage
FRITZ!Powerline and result in malfunction or an electrical
accident.
–The integrated socket of FRITZ!Powerline may only
carry a load up to the specified power limit of 2300 W
and 10 A maximum.
•Electrical devices with heating functions like irons or
heating units harbor an increased fire hazard.
–Never operate devices with fire hazards in the socket
of FRITZ!Powerline without supervision.

FRITZ!Powerline 546E 8
Conventions in the Manual
2 Conventions in the Manual
This manual uses various symbols and emphases:
2.1 Symbols
2.2 Highlighting
This symbol marks useful hints and tips.
This symbol indicates important instructions that must be
observed to avoid malfunctions.
Highlighting Function
Quotation marks Designate elements in the user interface
and paths.
Example:
Click “System / Update” and then click
the “Find New FRITZ!OS” button.
Blue lettering Designates cross-references and ad-
dresses for entry in the web browser.
Example:
See also the information on page 8.

FRITZ!Powerline 546E
FRITZ!Powerline 546E 9
3 FRITZ!Powerline 546E
3.1 This Is FRITZ!Powerline 546E
FRITZ!Powerline 546E is a powerline adapter with wireless
LAN and a smart plug.
FRITZ!Powerline connects network devices like PCs, note-
books, tablets and smart TV with your FRITZ!Box or another
Internet router. The devices receive access to the home net-
work and the Internet.
FRITZ!Powerline uses the power lines for data transmission to
the FRITZ!Box.
Network devices can be connected with FRITZ!Powerline wire-
lessly or using a LAN cable.
You can integrate FRITZ!Powerline into an existing powerline
network or combine it with a second Powerline adapter to cre-
ate a new powerline network.
The integrated socket switches electrical devices on and off
automatically according to your settings, can be controlled re-
motely on a computer, tablet, smartphone or FRITZ!Fon, and
measures the energy consumption of connected devices.
3.2 Powerline: Data Transmission over the Electrical Wiring
FRITZ!Powerline uses electrical wiring for data transmission.
This allows for transmission over greater distances and
through multiple walls and ceilings.
To ensure safe data transmission in the FRITZ!Powerline net-
work, encryption and a unique network password are enabled
in FRITZ!Powerline upon delivery; see also page 41.
3.3 Package Contents
•1 FRITZ!Powerline 546E
•1 network cable
•printed product information

FRITZ!Powerline 546E 10
Buttons, LEDs and LAN Ports
4 Buttons, LEDs and LAN Ports
4.1 Buttons and LEDs
FRITZ!Powerline has three buttons with integrated LEDs.
Button Functions
The buttons have the following functions:
Button Press Function
On/Off briefly Switches the socket on or
off.
WLAN • WPS briefly Switches wireless LAN on or
off.
long (at least
6 seconds)
Starts WPS.
Powerline • Secur
ity
briefly Switches FRITZ!Powerline on
or off.
long (at least
6 seconds)
Establishes a secure power-
line connection.
On/O
WLAN•WPS
Powerline •Security
On/O
WLAN•WPS
Powerline •Security

LAN Ports
FRITZ!Powerline 546E 11
Meaning of the LEDs
The LEDs show you the status of FRITZ!Powerline:
4.2 LAN Ports
FRITZ!Powerline 546E has two LAN ports (network ports).
Both LAN ports are Fast Ethernet ports for data rates of up to
100 Mbit/s.
The LAN ports can be used as follows:
•To connect a PC, notebook, smart TV or other network
devices; see page 17.
•To connect FRITZ!Box or another Internet router, see
page 34.
LED Condition Meaning
On/Off on The socket is switched on.
off The socket is switched off.
flashing Performing a firmware update.
WLAN • WPS on Wireless LAN is enabled.
off Wireless LAN is disabled.
flashing rapidly Performing WPS.
flashing slowly Searching for the wireless access
point.
Powerline • Se
curity
on FRITZ!Powerline is supplied with
power and connected with the
powerline network.
off FRITZ!Powerline is switched off.
flashing rapidly FRITZ!Powerline is configuring se-
curity settings.
flashing slowly FRITZ!Powerline is not connected
with the powerline network.
You can switch off the LEDs in the FRITZ!Powerline user inter-
face.

FRITZ!Powerline 546E 12
Integrated Socket
5 Integrated Socket
The integrated socket on the FRITZ!Powerline replaces the
electrical outlet where you plug in FRITZ!Powerline.
5.1 Maximum Capacity
The outlet is suitable for devices up to 2300 W and 10 A max-
imum.
5.2 Using Multi-Outlet Strips
Always plug FRITZ!Powerline directly into a wall outlet.
If you would like to use a multi-outlet strip, insert it in the in-
tegrated FRITZ!Powerline socket.
5.3 Intelligent Switching and Consumption Measurement
You can use the following functions with the outlet:
•Switch on and off on the PC, notebook, tablet, smart-
phone and FRITZ!Fon; see page 24
•Switch on and off automatically, for instance according
to a weekly schedule or Google calendar; see page 26
•Measure and evaluate power consumption, see page 28
On/O
WLAN•WPS
Powerline •Security

Using FRITZ!Powerline in the Powerline Network
FRITZ!Powerline 546E 13
6 Using FRITZ!Powerline in the Powerline Network
This section describes how to use FRITZ!Powerline 546E in the power-
line network:
•You can use FRITZ!Powerline to expand an existing powerline net-
work; see page 14
•You can use FRITZ!Powerline and a second powerline adapter to
configure a new powerline network; see page 15
6.1 What Is a Powerline Network?
A powerline network consists of FRITZ!Powerline 546E and at
least one other powerline adapter. The adapters are connect-
ed with each other over the electrical wiring (powerline).
The other powerline adapter is connected to the Internet rout-
er (for instance, FRITZ!Box) so that it connects the powerline
network with the home network and with the Internet connec-
tion.
Notebooks, tablets and other network devices connected
wirelessly or with a LAN cable receive access to the Internet
and to the home network via FRITZ!Powerline 546E.
Advantages of a powerline network: Using the electrical wir-
ing allows for transmission over greater distances and
through multiple walls and ceilings.
Power/DSL
Internet
Festnetz
WLAN
Info
WLAN
LAN
Power
Powerline
Powerline
LAN
LAN
On/O
WLAN•WPS
Powerline•Security

FRITZ!Powerline 546E 14
Expanding a Powerline Network with FRITZ!Powerline 546E
6.2 Expanding a Powerline Network with FRITZ!Powerline 546E
If a powerline network is already set up, you can expand the
powerline network with FRITZ!Powerline:
1. Insert FRITZ!Powerline 546E in an outlet in the vicinity of
a powerline adapter that is integrated in the powerline
network.
2. Wait for the “Powerline • Security” LED to start flashing.
This will take about a minute.
3. Press the button for secure powerline connections on
the other powerline adapter. The button is labeled “Se-
curity”, “Powerline” or something similar.
This starts transmission of the network password.
4. For the next step you have two minutes: Press and hold
down the “Powerline • Security” button on the
FRITZ!Powerline 546E until the “Powerline • Security”
LED begins flashing faster.
The FRITZ!Powerline is receiving the network password.
When “Powerline • Security” lights up, FRITZ!Powerline
is integrated in the powerline network.
Before you launch operation of FRITZ!Powerline: Make note
of the network key on the back of the device for later use.
Pow
Security
LAN
Power
Powerline
On/O
WLAN•WPS
Powerline •Security
On/O
WLAN•WPS
Powerline •Security
i
t
t
t
y
y
ity

Configuring a New Powerline Network with FRITZ!Powerline 546E
FRITZ!Powerline 546E 15
5. Plug FRITZ!Powerline 546E into an outlet where you
would like to use FRITZ!Powerline. You can use any out-
let in the circuit.
Now you can connect PCs, notebooks, tablets, smart TVs and
other network devices with FRITZ!Powerline, see Connecting
PCs, Tablets, Smart TVs and Other Devices on page 17.
6.3 Configuring a New Powerline Network with FRITZ!Powerline 546E
Requirements
The following requirement must be met in order to configure a
new powerline network with FRITZ!Powerline 546E:
•You have a second powerline adapter.
Configuring the Powerline Network
1. Insert the two powerline adapters into a multi-connector
strip, or in two outlets located close to each other.
2. Wait for the “Powerline • Security” LED to start flashing.
This will take about a minute.
3. Press and hold down the “Powerline • Security” button
on FRITZ!Powerline 546E until the “Powerline • Security”
LED begins flashing faster.
Before you launch operation of FRITZ!Powerline: Make note
of the network key on the back of the device for later use.
On/O
WLAN•WPS
Powerline •Security
On/O
WLAN•WPS
Powerline •Security
i
t
t
t
y
y
ity

FRITZ!Powerline 546E 16
Configuring a New Powerline Network with FRITZ!Powerline 546E
4. Press the button for secure powerline connections on
the second powerline adapter. The button is labeled
“Security”, “Powerline” or something similar.
5. Wait until the “Powerline • Security” LED on
FRITZ!Powerline 546E lights up.
The powerline network is configured.
6. Insert the second powerline adapter in an outlet near
the FRITZ!Box.
7. Connect the second powerline adapter to the FRITZ!Box
using a LAN cable.
8. Plug FRITZ!Powerline 546E into an outlet where you
would like to use FRITZ!Powerline. You can use any out-
let in the circuit.
Now you can connect PCs, notebooks, tablets, smart TVs and
other network devices with FRITZ!Powerline, see Connecting
PCs, Tablets, Smart TVs and Other Devices on page 17.
Pow
Security
LAN
Power
Powerline
Power/DSL
Internet
Festnetz
WLAN
Info
LAN
Power
Powerline

Connecting PCs, Tablets, Smart TVs and Other Devices
FRITZ!Powerline 546E 17
7 Connecting PCs, Tablets, Smart TVs and Other Devices
PCs, notebooks, tablets, smartphones, smart TVs and other
network devices can be connected with FRITZ!Powerline using
a LAN cable or wirelessly.
Other network devices include Blu-ray players, satellite/TV re-
ceivers, printers, network storage devices and IP telephones.
Via FRITZ!Powerline the network devices receive access to the
home network and to the FRITZ!Box’s Internet connection.
7.1 Connecting a Network Device with LAN Cable
1. Insert a LAN cable in the “LAN 1” or “LAN 2” port on the
FRITZ!Powerline.
2. Insert the free end of the cable into the LAN socket on
the network device.
The network device is connected securely with the Internet
access of the FRITZ!Box via the powerline connection.
7.2 Connecting a Hub or Switch
You can also connect a network hub or switch to the LAN
ports on FRITZ!Powerline. Network devices connected to the
hub or switch can exchange data with all other devices in the
home network.
On/O
WLAN•WPS
Powerline •Security

FRITZ!Powerline 546E 18
Connecting Network Devices Wirelessly
7.3 Connecting Network Devices Wirelessly
Network devices that support wireless LAN can be connected
wirelessly with the FRITZ!Powerline 546E and the home net-
work.
You can establish wireless connections using WPS or a wire-
less LAN software.
Establishing a Wireless LAN Connection Using WPS
FRITZ!Powerline supports the WPS Push Button method for
establishing wireless connections. You can use this method if
your network device has a WPS button, or if WPS can be start-
ed in the wireless LAN software of the network device.
1. Press the “WLAN • WPS” button of the FRITZ!Powerline
until the LED in the button flashes.
2. Start WPS on the network device within two minutes.
The wireless LAN connection will be established.
Entering the Network Key in Wireless LAN Software
1. Remove FRITZ!Powerline from the outlet briefly and take
note of the network key printed on the back of the de-
vice.
If you have already assigned a new network key in the
user interface (see page 22), be sure to enter the new
one.
2. Start the wireless LAN software on the network device.
3. Search for wireless networks in the vicinity.
4. Select the wireless network of FRITZ!Powerline.
The preconfigured name of the wireless LAN radio net-
work (SSID) is “FRITZ!Powerline 546E”.
5. Enter the network key.
6. Start the connection procedure.

Adopting the Wireless LAN Registration Data of the FRITZ!Box
FRITZ!Powerline 546E 19
7.4 Adopting the Wireless LAN Registration Data of the FRITZ!Box
At the touch of a button FRITZ!Powerline can adopt the wire-
less radio network name (SSID) and the network key of the
FRITZ!Box.
Wireless devices on which a wireless LAN connection to the
FRITZ!Box is already configured then automatically connect
with FRITZ!Powerline when they change location.
Example
The FRITZ!Box is located in the home office and FRITZ!Power-
line is in the living room one floor above it. The same radio
network name (SSID) and the same network key are config-
ured in both devices.
Your notebook is connected with the FRITZ!Box via wireless
LAN. When you leave the wireless network of the FRITZ!Box
with the notebook to go to the living room, the notebook au-
tomatically connects with the FRITZ!Powerline there.
Adopting the Wireless LAN Registration Data of the
FRITZ!Box
1. Press the “Powerline • Security” button on
FRITZ!Powerline 546E until the “Powerline • Security”
LED starts flashing.
2. Press the button for WPS on the FRITZ!Box until the
“WLAN” LED on the FRITZ!Box starts flashing. The button
is labeled “WPS”, “WLAN / WPS” or “WLAN”.
FRITZ!Powerline adopts the wireless LAN registration data of
the FRITZ!Box.
Any necessary changes to the wireless LAN registration data
can be made in the user interface (see page 22).
On/O
WLAN•WPS
Powerline •Security
On/O
WLAN•WPS
Powerline •Security
i
t
t
t
y
y
ity

FRITZ!Powerline 546E 20
Application Examples
8 Application Examples
The following sections contain several examples for how to use
FRITZ!Powerline 546E in your home network.
8.1 Wireless Internet Access from Anywhere in the Home
With the FRITZ!Powerline 546E you can provide an Internet
connection to the entire household.
•FRITZ!Powerline 546E is connected over the power lines
with another adapter in a powerline network. This is how
FRITZ!Powerline accesses the Internet connection in the
basement.
•In the attic a tablet PC and a smartphone are connected
with FRITZ!Powerline 546E over wireless LAN and
through this to the Internet connection.
On/O
WLAN
Powerline
INTERNET
Power/DSL
Internet
Festnetz
WLAN
Info