FROMANTEEL Generations Series User manual

USER MANUAL
SWISS QUARTZ CALIBER 6203
APPLICABLE TO:
THE GENERATION SERIES TWIN TIME

Welcome to the small circle of individuals who, if we are to be ab-
solutely precise, demand slightly more of a watch than absolute
precision.
Appreciation of a watch is more than a mere recognition of the
correct time. It is enthusiasm for an ingenious idea. For the inter-
play between precision and imagination. Between time and time-
lessness. Between boundaries and innity. Between laws to which
the entire world is subject, and taste, which cannot be dictated to
anyone.
That’s why Fromanteel devotes time to watches that must not only
run with absolute precision but which also, with every passing se-
cond, exert a fascination with the great achievements of master
craftsmanship: a fascination with new inventions of a technical, ma-
terial or formal nature, even if they are concealed in minute details
that are perhaps not even visible.
You are now the owner of a beautiful new example of this Froman-
teel tradition, gifted to you by a special someone, or by yourself.
Whoever it was, has come to realize that this was the time to credit
you for the good you did or achieved. May this watch forever be the
reminder of that moment.
Fromanteel. Quality Time you can truly own.
CONGRATULATIONS

Your Fromanteel watch displays the time in hours, minutes,
seconds, and a second time zone. The 6203 Caliber is, therefore,
one of the most versatile movements in our collection.
The Swiss Quartz movement is of the highest quality and manu-
factured by the renowned Swiss caliber (movement) manufacturer
Ronda.
Your watch is protected by a sapphire glass of hardness grade 9 on
Mohs’ scale. Your watch is water-resistant to 5 ATM.
To ensure that this extraordinary watch continues to perform fault-
lessly in the future, we present you with a good set of tips on how
to operate and maintain it.
TECHNICAL FUNCTIONS
OF THE QUARTZ 6203 CALIBER

Hour hand ...1
Minute hand ... 2
Second hand ... 3
Crown A ... 4
5 ... Date Indicator
6 ... TwinTime
Crown B ... 7
1 2
3
4
5
6
7

With the crown in the normal position (0), your watch is ‘locked’
from an accidental adjustment of your hour, minute, day or date.
Also, the Quartz movement is activated and draws power from its
battery at this position. The crown must always be in position 0
when you are wearing your watch.
FUNCTIONS OF THE CROWN
CROWN A : NORMAL POSITION
21
1

Pull out the Crown A to position (2). This will stop the movement.
Now use the crown to move the minute hand a few minute-strokes
beyond the time to be set. Then position the minute hand by mo-
ving it gently backward until it is precisely above the correct minute
stroke. This ensures that the minute hand begins to run immediately
when you restart the movement. Push the crown back into position
(0) to activate the watch.
TIME SETTING
Pull the Crown A out to position (1) to stop the watch. Turn the
crown clockwise to adjust the date. Once done, push the crown
into position 0 to ‘lock’ the watch and activate it once again.
DATE SETTING
With the Crown B in the normal position (0), your Twin Time is ‘loc-
ked’ from an accidental adjustment of your hour and minute. The
crown must always be in position 0 when you are wearing your
watch.
CROWN B : NORMAL POSITION
Pull out the Crown B to position (1).
Now use Crown B to move the minute hand a few minute-strokes
beyond the time to be set. Push the crown back into position (0) to
activate the watch.
TWIN TIME SETTING

Dust and dirt tend to collect in gaps in the back of the case or strap.
We advise, therefore, to clean your watch occasionally. Use a dry
toothbrush to clean your watch-case. Avoid contact with solvents,
detergents, perfumes, cosmetic products, since they may damage
the leather strap, your watch case or the gaskets between the push-
ers or crown.
Avoid speakers or refrigerators, since these have strong magnet-
ic elds. Avoid shocks, whether thermal or other. Avoid tempera-
tures above 60˚C (140˚F), below 0˚C (32˚F) or extreme temperature
changes.
For the Chronograph: do not operate the pushers under water to
prevent water from entering the movement. Store your watch in a
dry place when not using it.
Replace an empty battery as soon as possible. Fromanteel offers
a battery replacement service on its website or in The Fromanteel
Store. Each Fromanteel Quartz watch comes with an ‘end-of-life’
battery indicator. You will notice the second-hand jumping in inter-
vals of 3 to 4 seconds. This means the battery should be changed
in the next 2-3 weeks to prevent permanent damage to the watch.
PREVENTIVE MAINTENANCE

The water-resistance of Fromanteel watches is stated in ATM (at-
mosphere) instead of in meters. 1 ATM stands for a unit of pressure
equal to the air pressure at sea level (or 14.72 pounds of weight per
square inch). Meters, which are often used elsewhere in the watch
industry to indicate water-resistance, cannot be equated with dive
depth because of the test procedures that are frequently used.
Water-resistance shown in meters provides no indication as to actu-
al use of the watch in the presence of moisture and wetness, and in
or under water. As body movement caused by swimming or strong
water current can also inuence the increase in pressure. Depth al-
one would be inaccurate to address the water-resistance of your
watch. All Fromanteel watches are made to resist 5 ATM (or more,
if differently indicated).
To ensure that your watch continues to function correctly, you
should have it checked by a Fromanteel Service Centre at least
once every two years. Your watch should also be tested after ex-
posure to unusually harsh conditions. If the tests are not carried out
as stipulated, or if the watch is opened by an unauthorized third
party, Fromanteel will accept no warranty or liability claims.
A THING OR TWO ABOUT
WATER RESISTANCE

Most of the Fromanteel straps are made of leather. Fromanteel of-
fers, however, a small selection of textile or rubber with a leather or
textile inlay. These straps are carefully made by hand and use natu-
ral materials. It is therefore essential to make sure that the high-qua-
lity strap does not come into contact with water, oily substances,
solvents, cleaning agents, or cosmetic products. This way, you can
prevent discoloration and premature aging of the material.
A NOTE: ABOUT THE STRAPS
Although the parts in this watch are all manufactured from top-qua-
lity materials, some components are subject to natural wear and
tear. It is particularly important to ensure that the points at which
wear occurs are always well lubricated and that oil contaminated
by metal abrasion is regularly removed. For this reason, we recom-
mend that you have your watch serviced approximately every 3 to
4 years.
SERVICE
YOUR WATCH