Fromm FS360 Series User manual

It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2019
www.fromm-stretch.com
Assembly Instruction / ELS /
Numbers & Drawings
Scale unit FS360
Version 01 Machines
Version 01 List
Website : www.fromm-stretch.com
Assembly Instruction/ELS/Spareparts_FS360 scale unit.V01.EN01/ © 04/19

FROMM Wrapping Systems S.r.l.
Viale del Lavoro 21
IT-37013 Caprino V.se. (VR)
ITALY
Office.0039 045 205 7300
Fax. [phone]
[email protected]
www.fromm-stretch.com
Bank. Banca Popolare di Verona | IT-37010 |ITALY
Account Nr. 000000000227 | Swift Nr. IT-BAPPIT21130
Iban. IT11-W-05034-85830-000000000227
Vat Nr. 04146150232 | EORI. IT 04146150232
Manual Assembly Instructions Scale unit FS1.0386A for FS360 machine
1. SAFETY INSTRUCTION
1.1. GENERAL SAFETY PRECAUTIONS
- Carefully read the “Directions for use”, paying particular attention to the
“Residual risks”;
- Pay attention to the safety warnings;
- Use the machine only for the use for which it is designed;
- Sometimes, accidents can be caused by a "careless" use of the machine by the
operator;
- Pay maximum attention;
- Preserve the readability of the information signs and observe the indications
given;
- Do not tamper with the safety devices and protections;
- The personnel authorised to carry out any operation on the machine has to be
adequately trained.
1.2. GENERAL SAFETY PRECAUTIONS
- The personnel authorised to handle the machine (loading and unloading) must
possess particular expertise in the field of intervention;
- Carry out handling (loading and discharge) according to the information
delivered together with the product;
- During handling use one or two assistants, if required. This operation may
generate unpredictable risks;
- In order to minimise the risks related to assistants' involvement, you must inform
them priority on the type of work and the behaviour to be used;
- The machine must be handled with the aid of specific means (crane, forklift etc.)
by qualified personnel capable of observing the safety requirements;
- When using the lifting means, insert and/or fasten the devices (hooks, forks etc.)
ONLY into the points provided on the package and/or the machine;
- Transport the machine suitable means of adequate capacity;
- The minimum and maximum temperature (during transport and/or storage) must
fall within the range allowed in order to prevent damaging the electrical
components;
- Install the machine ONLY in spaces free of explosion and /or fire risks;
- Avoid the spaces exposed to atmospheric and corrosive agents;
- Assess, prior to installation, if it is necessary to draw up a "safety plan" in order to
protect the safety of the personnel involved;
- Ensure suitable safety conditions for carrying out works at height in areas difficult
to reach or however dangerous;
- Install the machine according to the minimum perimeter indicated by the
manufacturer and the surrounding activities;

FROMM Wrapping Systems S.r.l.
Viale del Lavoro 21
IT-37013 Caprino V.se. (VR)
ITALY
Office.0039 045 205 7300
Fax. [phone]
[email protected]
www.fromm-stretch.com
Bank. Banca Popolare di Verona | IT-37010 |ITALY
Account Nr. 000000000227 | Swift Nr. IT-BAPPIT21130
Iban. IT11-W-05034-85830-000000000227
Vat Nr. 04146150232 | EORI. IT 04146150232
- Should the machine interface directly/indirectly with other machines or
production lines, draw up the installation design of the machine;
- The design must include all the operating conditions in order to comply with the
standards in force on safety at work place;
- Carry out the electrical connections professionally and in full compliance with the
instructions provided by the manufacturer and the specific regulations in force;
- The electrical connections must be carried out EXCLUSIVELY by operators with
particular expertise in the field of intervention;
- The operator must test the machine and check, through a general test, that the
machine can be commissioned without any risk for the operator;
- Dismantle all the packaging components in compliance with the standards in
force in the country of installation.
1.3. SAFETY WARNINGS FOR USE AND OPERATION
- The operator must be trained and possess the proper knowledge required to
carry out the specific tasks and must meet the conditions required for the safe
use of the machine;
- The machine has been designed and built to satisfy all the operating conditions
of the Manufacturer, and those alone;
- Use the machine ONLY with the original safety devices installed by the
manufacturer;
- DO NOT tamper with, remove or bypass the safety devices installed on the
machine;
- DO NOT modify the constructive and functional characteristics of the machine;
- ALWAYS wear the individual safety devices indicated in the "Instructions for use"
and provided by the standards in force regarding the safety at workplace;
- ALWAYS keep the surrounding areas in suitable conditions and free of obstacles
in order to minimise the risks, especially near the control station;
- The machine must be used by one operator ONLY, that must be assigned and
authorised by the employer;
- The involvement of one or more assistants when performing some operations or
maintenance interventions may present unpredictable risks;
- In order to minimise the risks related to assistants' involvement, you must inform
them priority on the type of work and the behaviour to be used;
- Do not use the machine if the scheduled maintenance work has not been
regularly carried out;
- DO NOT continue to use the machine if malfunctions have been detected.
- Stop the machine immediately and restart it only after the normal conditions of
use have been restored;
- DO NOT carry out interventions different from those indicated in the user manual
without the written consent of the manufacturer;
- Do not carry out interventions with the machine on, but only carry them out after
having stopped the machine and put it in safety conditions;

FROMM Wrapping Systems S.r.l.
Viale del Lavoro 21
IT-37013 Caprino V.se. (VR)
ITALY
Office.0039 045 205 7300
Fax. [phone]
[email protected]
www.fromm-stretch.com
Bank. Banca Popolare di Verona | IT-37010 |ITALY
Account Nr. 000000000227 | Swift Nr. IT-BAPPIT21130
Iban. IT11-W-05034-85830-000000000227
Vat Nr. 04146150232 | EORI. IT 04146150232
- DO NOT clean or wash the machine with aggressive products to avoid damaging
the components;
- Replace the components ONLY with ORIGINAL PARE PARTS or with SIMILAR design
and functional features;
- Use the machine to perform the weighing of each single pallet.
1.4. SAFETY WARNINGS RELATED TO INCORRECT USE
Read the next warnings carefully.
1.4.1. INCORRECT USE THAT CAN BE REASONABLY EXPECTED
The predictable incorrect use consists of: “the use of the machine different from the
indications given in the manual, that may stem from the easily predictable human
behaviour”.
- It is forbidden to weigh the products mentioned below in order not to damage
the machine and not to cause accident risks for the user;
- Any type and density of liquids in fragile containers.
- Inflammable material.
- Explosive material.
- Loose and volatile powders.
- Any material or product not intended that could in some way result hazardous to
the operator and cause damage to the machine.
- Do not use the machine to weigh human beings (for example, animals and
people).
- DO NOT use or let the machine be used for purposes or in ways not provided by
the manufacturer.
- Do not use the machine as a workbench.
1.4.2. EMPLOYER OBLIGATIONS
- The operator must possess the required training and meet the suitable conditions
for carrying out the activities in safety conditions;
- The employer must inform the operator on the INCORRECT USES predictable and
on the persistent Residual risks;
- The operator must be capable of reading and understanding the user manual
and must easily identify the safety signs;
- The employer must adequately document the training obtained by the
operators.

FROMM Wrapping Systems S.r.l.
Viale del Lavoro 21
IT-37013 Caprino V.se. (VR)
ITALY
Office.0039 045 205 7300
Fax. [phone]
[email protected]
www.fromm-stretch.com
Bank. Banca Popolare di Verona | IT-37010 |ITALY
Account Nr. 000000000227 | Swift Nr. IT-BAPPIT21130
Iban. IT11-W-05034-85830-000000000227
Vat Nr. 04146150232 | EORI. IT 04146150232
1.5. SAFETY WARNINGS FOR REGULATIONS AND MAINTENANCE
- Keep the machinery in maximum efficiency condition and perform all the
scheduled maintenance operations provided for by the manufacturer. Proper
maintenance will provide the best performance, a longer life span and constant
compliance with safety requirements;
- Important. Maintenance work and adjustments shall be carried out by qualified,
authorised personnel;
- Take all necessary precautions (suitably mark the working area and the exits,
ensure proper visibility, provide all necessary supporting equipment, etc.) to
ensure safe operation;
- Delimitate the work area to minimise the risks, as per the workplace safety and
health regulations;
- DO NOT use products that contain corrosive, toxic and inflammable substances;
- Wear the Individual Protection Devices provided by the laws on workplace safety
and indicated in the "Instructions for use" and/or affixed to the machine;
- Replace the components only with original spare parts or with parts with similar
design and functional characteristics so as to keep the intended safety level
unchanged;
- Use lubricants (oils or grease) recommended by the manufacturer or with similar
chemical-physical features;
- Do not dump into the environment polluting liquids, worn parts and maintenance
waste;
- Dispose of the same in compliance with current regulations on the matter.
- Select the components according to the chemical and physical features of the
material and carry out the differentiated waste disposal as per the standards in
force;
- Follow the procedures in this chapter;
- Non-compliance with the instructions given may cause risks for safety and health
of the persons and economic damages.
1.6. SAFETY WARNINGS FOR ELECTRICAL EQUIPMENT
The electrical system has been designed and built in compliance with applicable
legislation.
This legislation also specifies the ambient conditions required for operation.
The following list specifies ambient conditions necessary to ensure correct electrical
system function.
- Ambient temperature must be between 0°C°C and 40°C;
- Relative humidity must be between 50% (measured at 40°C) and 90% (measured
at 20°C);
- The installation area must not be subject to or contain sources of
electromagnetic interference or radiation (X rays, laser light etc);

FROMM Wrapping Systems S.r.l.
Viale del Lavoro 21
IT-37013 Caprino V.se. (VR)
ITALY
Office.0039 045 205 7300
Fax. [phone]
[email protected]
www.fromm-stretch.com
Bank. Banca Popolare di Verona | IT-37010 |ITALY
Account Nr. 000000000227 | Swift Nr. IT-BAPPIT21130
Iban. IT11-W-05034-85830-000000000227
Vat Nr. 04146150232 | EORI. IT 04146150232
- The installation area must not contain potentially explosive or flammable mixtures
of gases or dust;
- No contaminant or corrosive products (acids, chemicals, salts etc.) may be used
during production and maintenance. Any products used must be kept away
from electrical components;
- The ambient temperature during storage must be between - 25°C and 55°C;
- Electrical equipment may be exposed to temperatures up 70°C, provided that
exposure does not exceed 24 hours;
- The electrical system will function correctly up to an altitude of 1000 m above sea
level.
If any of the aforementioned conditions cannot be met, any additional measures
necessary to ensure safe operating conditions (e.g. special electrical components,
air conditioning systems etc.) must be defined during the contractual stage.

FROMM Wrapping Systems S.r.l.
Viale del Lavoro 21
IT-37013 Caprino V.se. (VR)
ITALY
Office.0039 045 205 7300
Fax. [phone]
[email protected]
www.fromm-stretch.com
Bank. Banca Popolare di Verona | IT-37010 |ITALY
Account Nr. 000000000227 | Swift Nr. IT-BAPPIT21130
Iban. IT11-W-05034-85830-000000000227
Vat Nr. 04146150232 | EORI. IT 04146150232
2. TECHNICAL INFORMATIONS
2.1. MACHINE GENERAL DESCRIPTION
- The machine is predisposed to weight each pallet;
- The weighing device is electronic and it is equipped with display that
shows the weight, not for tax purposes;
- The weighing device can be connected (with serial cable RS 232) to
a computer to record the values;
- The machine is equipped with a series of safety devices designed to avoid any
harm befalling the operator or other persons who come into contact
with the machine in any way. The machine is produced in a range of
different models in order to suit market requirements.
2.1.1 MAIN COMPONENTS
The list shows the description of the components and the main functions:
A) Base: it is the main structure of the balance;
B) Strain gauge “Loading cell”: it detects the weight of the wrapped loads;
C) Control console: contains the user interface for the calibration and weighing of
pallets;
D) Fixing the load cell foot.

FROMM Wrapping Systems S.r.l.
Viale del Lavoro 21
IT-37013 Caprino V.se. (VR)
ITALY
Office.0039 045 205 7300
Fax. [phone]
[email protected]
www.fromm-stretch.com
Bank. Banca Popolare di Verona | IT-37010 |ITALY
Account Nr. 000000000227 | Swift Nr. IT-BAPPIT21130
Iban. IT11-W-05034-85830-000000000227
Vat Nr. 04146150232 | EORI. IT 04146150232
C
B
C
D
A
A
B
C
D

FROMM Wrapping Systems S.r.l.
Viale del Lavoro 21
IT-37013 Caprino V.se. (VR)
ITALY
Office.0039 045 205 7300
Fax. [phone]
[email protected]
www.fromm-stretch.com
Bank. Banca Popolare di Verona | IT-37010 |ITALY
Account Nr. 000000000227 | Swift Nr. IT-BAPPIT21130
Iban. IT11-W-05034-85830-000000000227
Vat Nr. 04146150232 | EORI. IT 04146150232
2.2. DESCRIPTION OF ACCESSORIES ON REQUEST
To increase the performance and versatility of the machine, the Manufacturer makes
the following accessories available.
-Labeling machine (A): it allows to print a label with the weighing information to
be applied on the pallet;
(A)
-Support for indicator (B).
(B)

FROMM Wrapping Systems S.r.l.
Viale del Lavoro 21
IT-37013 Caprino V.se. (VR)
ITALY
Office.0039 045 205 7300
Fax. [phone]
[email protected]
www.fromm-stretch.com
Bank. Banca Popolare di Verona | IT-37010 |ITALY
Account Nr. 000000000227 | Swift Nr. IT-BAPPIT21130
Iban. IT11-W-05034-85830-000000000227
Vat Nr. 04146150232 | EORI. IT 04146150232
2.3. TECHNICAL DATA
The illustration and table show the dimensional characteristics and technical data of
the machine.
Dimensions referred to FS360 machine with turntable Ø1500mm, mast H=2100mm.
2.3.1. TECHNICAL CHARACTERISTICS
Value Supply voltage V 220 - 240 1Ph
Electric current frequency 50/60 Hz
Installed power 5 W
Maximum capacity 2000 kg
Operating ambient temperature ° C 0 ÷ 40