FSC Solid Pine User manual

Solid Pine 3-Tier Shoe Rack
Dimensions
Width - 83.8cm
Depth - 26.6cm
Height - 50.7cm
Important– Please read these instructions fully before starting assembly
Assembly Instructions- please keep for future reference875/3878
Issue 1 - 07/03/12
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
Issue 2 - 14/06/13

Safety and Care Advice
Important –Please read these instructions fully before starting assembly
Care and maintenance
• Check you have all the
components and tools listed on
page 1.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp
cloth and mild detergent, do
not use bleach or abrasive
cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
906-4009 IN_AG 5-Shelf Unit S2.pdf 1 2013-05-21 08:53

Components -Panels
Please check you have all the panels listed below
1Upright x 4
(50.7(h)cm)
2Cross piece x 6
(24.6(d)cm)
3Shelf slat x 9
(79(w)cm)
Components - Fittings If you have damaged or missing components,
call the Customer Helpline: 0845 640 0800
Note:
may be supplied than are required.
A BCD
30mm Screw x 42
Tools required
Phillips screwdriver
(medium & large)
Ruler – Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
1
906-4009 IN_AG 3-ShoeRack_S3.pdf 1 2013-06-14 10:47

2
Assembly Instructions
Step 1
906-4009 IN_AG 5-Shelf Unit S4.pdf 1 2013-05-21 16:39
2
A
A
A
3
A
A
A
A
X3
2
3A
Connect 3 x Shelf slat
3to 2 x Cross piece
2as shown using 6 x
30mm screw A
Ensure that the Shelf
slats are the same way
round and are tted
snugly into the groove
of the Cross piece.
Repeat this step for all
the 3 Shelves
2-3 mm
Distance 18 mm
6 Pcs
3 Pcs
2 Pcs
No predrilled holes

3
Assembly Instructions
Step 2
Step 3
906-4009 IN_AG 5-Shelf Unit S5.pdf 1 2013-05-21 16:40
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Place the 3 shelves
on the oor or a at
surface as shown and
connect 2 x uprights
1using 12 x 30mm
screw Ato complete
the front/back side of
the shelf.
Ensure that the Cross
pieces are tted snugly
into the groove of the
uprights and that the
grooves of the cross
pieces are at the top.
Turn the connected
shelves and uprights
upside down and re-
peat step 2 using 12 x
30mm screw A
2 Pcs
1
2 Pcs
12 Pcs
A
12 Pcs
A

Solid Pine 3-Tier Shoe Rack
Dimensions
Width - 83.8cm
Depth - 26.6cm
Height - 50.7cm
Important– Please read these instructions fully before starting assembly
Assembly Instructions- please keep for future reference875/3878
Issue 1 - 07/03/12
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800