FSN MDVR IPS700A Installation and maintenance instructions

MDVR
IPS700A Medical Digital Video Recorder
Installer User’s Guide
Before connecting, operating or adjusting this product, please
read this instruction booklet carefully and completely.

2 - English
FSN1949 - 4/2014
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Symbol Denitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
IPS700A Sample System Conguration . . . . . . . . . . . . . . . 10
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connect Input Video Sources . . . . . . . . . . . . . . . . . . . . . 12
Connect Output Video Destinations . . . . . . . . . . . . . . . . . 12
Connect Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connect a Remote Control Device . . . . . . . . . . . . . . . . . . 14
Methods of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Front Panel Control Keypad (OSD) . . . . . . . . . . . . . . . . . . 16
General Specication . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Mechanical Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Cleaning Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
The specications and information in this document are subject to change without notice.

English - 3
FSN1949 - 4/2014
Overview
MDVR, part number IPS700A, is a medical digital video recorder from FSN Medical Technologies.
It is intended to record and store video and still image from operating devices for later playback
or transfer to other media.
MDVR is an advanced high quality video processing system that has built-in capabilities for signal
source selection, multiple resolutions, and control through RS232C, TCP/IP or Android app.
Recording medical digital video is easy with MDVR. An accompanying control tablet runs the in-
tuitive user interface and gives quick access to options for setup, recording, capture, le storage,
patient information, play back, and data backup functions.
In addition, capture and recording can be controlled through an endoscopic camera head but-
tons or a foot pedal accessory.
All recorded les are stored on MDVR’s internal hard disk drive. These stored les can then
be played back on a display monitor, or restored to variety of media including external drives,
memory sticks, DVDs, Blu‐ray disks, and network servers.
All MDVR inputs correspond with universal standards that accept VGA, DVI‐D (up to 1920x1080
resolution), composite video, and S‐video inputs.

4 - English
FSN1949 - 4/2014
Symbol Denitions
The following symbols appear on the product, its labeling, or the product packing. Each symbol
carries a special denition, as dened below:
AC Voltage Switches on power
Switches o power Contained spare fuse
Dangerous : High Voltage Consult accompanying docu-
ments
Indicates protective earth
ground Power adapter
Indicates top-bottom
direction Serial Number
Do not get wet Manufacturer
Maximum Stacking Fragile
Humidity limitation Indicates the manufacturing date
Temperature limitation Atmospheric pressure limitation
Authorized representative in the European community
Representative in the USA Tested to comply with FCC
Class B standard.
Medical Equipment is in accordance with UL 60601-1 and CAN/CSA C22.2 No.
601.1 in regards to electric shock, re hazards, and mechanical hazard.
Indicates proof of conformity to applicable European Economic Community
Council directives and to harmonized standards published in the ocial jour-
nal of the European Communities.
This symbol indicates that the waste of electronic equipment must not be
disposed as unsorted municipal waste and must be collected separately.
Please contact the manufacturer or other authorized disposal company to
decommission your equipment.
Refer to the instruction
manual / booklet. Equipotentiality.
Indicates the display is approved according to
the CCC regulations.
China RoHS labels.

English - 5
FSN1949 - 4/2014
Safety and Instructions
Please read the following safety instructions as they are designed to prevent damage to property
and harm to the user.
Warning / Caution
Failure to follow directions noted by this symbol could result in bodily harm or dam-
age to equipment.
Notational Conventions
Prohibited Important to read and understand at all times
Do not disassemble Disconnect the plus from outlet
Do not touch Grounding to prevent an electrical shock
Power
Use only a proper plug and voltage.
Improper power may cause electric shock or equipment damage.
To avoid the risk of electric shock, this equipment must only be connected to a
power supply with protective grounding.
Installation
Do not connect any other wires or accessories to this system which do not comply.
An improper wire may cause electric shock or equipment damage.
Insert wires rmly so that they do not come loose.
A bad connection may cause fault.
Operating environment
Be sure to contact this product’s supplier when installing your system in a location
with heavy dust, high or low temperatures, high humidity, or chemical sub-
stances.
Failure to do so may cause serious damage to your system.
Others
If this system does not operate normally, in particular, if there are any unusual
sounds or smells coming from it, unplug it immediately.
Please contact supplier when you want to use this system with unknown equip-
ment. Please power o and pull out the power cord when you want to move this
system.

6 - English
FSN1949 - 4/2014
Caution
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
This symbol alerts the user that important literature concerning the operation of this unit
has been included. Therefore, it should be read carefully in order to avoid potential problems.
This symbol warns the user that un-insulated voltage within the unit may have sucient
magnitude to cause electrical shock. Therefore, it is dangerous to make contact with any part
inside the unit.
To reduce the risk of electric shock, DO NOT remove cover (or back). There are no user service-
able parts inside. Refer servicing to qualied service personnel.
To prevent re or shock hazards, do not expose this unit to rain or moisture. Also, do not use this
unit’s polarized plug with an extension cord receptacle or other outlets unless the prongs can be
fully inserted.
The equipment is designed to meet the medical safety requirements for a patient vicinity device.
This device may not be used in connection with life support equipment.
Underwriters Laboratories (UL) Classication:
UL safety Compliance:
This system is U.L. Classied WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZ-
ARDS ONLY IN ACCORDANCE WITH UL 60601-1/CAN/CSA C22.2 NO. 601.1
EEC Safety Compliance:
This system meets the requirements of EN-60601-1 so as to conform to the Medical Device Direc-
tive 93/42/EEC (general safety information). Use 120V rating 5-15P type plug only in the U.S. This
system is intended for connection to a separate medical grade power supply.
Caution: Make sure the power cord is the correct type that is required in your area.
This system has a universal power supply that allows operation in either 100-120V AC or 200-
240V AC voltage areas (no user adjustment is required).
Use the proper power cord with correct attachment plug type. If the power source is 120 V AC,
use a power cord which is a Hospital Grade Power Cord with NEMA 5-15 style plug, labeled for
125 volts AC with UL and C-UL approvals.

English - 7
FSN1949 - 4/2014
If the power source is a 240 V AC supply, use the tandem (T blade) type attachment plug with
ground conductor power cord that meets the respective European country’s safety regulations.
The hospital-grade plug for medical products intended for use in Denmark has DEMKO approval
and is rated 13 amps at 250Vac. Plug is recommended for use in medical applications and speci-
cations are being added to the standard SB 107-2-D1. Plug mates with maker’s Danish hospital-
grade socket. Hospital sockets have slightly dierent shaped openings allowing only the hospital
plug, not the standard Danish plug, to be inserted, to protect the ac circuit in specic medical
settings.
FCC WARNING :
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protec-
tion against interference. This system can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, it may interfere with other radio communications
equipment.
There is no guarantee that interference will not occur in a particular installation. If this equipment
is found to cause harmful interference to radio or television reception, the user is encouraged to
try to correct the interference by carrying out one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between this system and the subject of interference.
3. Plug this system into an outlet on a dierent electrical circuit than that to which the subject of
interference is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICES TO USER :
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1 )this device may not cause harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired operation.
This equipment generates or uses radio frequency energy. Changes or modications to this
equipment may cause harmful interference unless the modications are expressly approved in
the instruction manual.
The user could lose authority to operate this equipment if an unauthorized change or modica-
tion is made.

8 - English
FSN1949 - 4/2014
Recycling :
Follow local governing ordinances and recycling plans regarding the recycling or disposal of this
equipment.
Servicing
Do not attempt to service the system yourself as opening or removing covers may expose you
to dangerous voltages or other hazards, and will void the warranty. Refer all servicing to quali-
ed service personnel. Unplug the system from its power source and refer servicing to qualied
personnel under the following conditions:
-If the power cord or plug is damaged or frayed.
-If liquid has been spilled into the system.
-If objects have fallen into the system.
-If the system has been exposed to rain or moisture.
-If the system has been subjected to excessive shock by being dropped.
-If the enclosure has been damaged.
-If the system seems to be overheated.
-If the system emits smoke or abnormal odor.
-If the system fails to operate in accordance with the operating instructions.
Accessories
Use only accessories specied by the manufacturer, or sold with the system.
Classication
Protection against electric shock : Class I including AC/DC power.
Applied Parts : No Applied Parts
Degree of safety in the presence of ammable anesthetics mixture with air or with oxygen or
with nitrous oxide. Not suitable for use in the presence of a ammable anesthetics mixture with
oxygen or with nitrous oxide.
Mode of operation : Continuous.

English - 9
FSN1949 - 4/2014
Item Description Pack Qty
1 MDVR (IPS700A) unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2 User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3 AC power Cord (6ft, Medical Grade) . . . . . . . . . . . . . . . . . . . . . . . . 1
4 D-SUB cable (6ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
5 DVI cable (6ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
6 BNC cable for Video (6ft). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
7 SVHS cable for Video (6ft). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Package Contents
Verify that you received all components of your respective package.
Inspect each component and verify that none of the components have been tampered with in any way.
1
2
3
4
5
6
7

10 - English
FSN1949 - 4/2014
MDVR Sample System Conguration
Source Signals
• VGA
• DVI-D
• CVBS
• S-Video
• Audio
Saved to Media:
• CD
• DVD
• Blu-ray
• USB
• FTP Server
Display Monitor
Playback
Medical Digital
Video Recorder
Start and stop
with foot pedal
or hand switch.
Control
Interface

English - 11
FSN1949 - 4/2014
Connectors
1Blu-ray Disk 13 Network port
2USB 14 USB
3LCD 15 RS232C
4Capture button 16 DVI-D out
5Record button 17 VGA out
6Stop button 18 DVI-D in
7Direction button 19 VGA in
8Enter button 20 CVBS in
9Menu button 21 CVBS out
10 Earth Terminal 22 S-Video in
11 AC ON/OFF SWITCH 23 Audio in/out
12 AC in 24 Foot pedal recording/capture
1
2
3
4 5 6
78
9
10
11 12
13
14
15
16
17
18
19
20
21
22 23 24

12 - English
FSN1949 - 4/2014
Connect Input Signals
Connect Output to Video Display
MDVR has connections to receive signals as DVI-D, VGA, CVBS, and S-Video. Specic applications
will determine the type of input signal sources that will be connected to MDVR. Never use this
system with damaged cords. Keep all cords away from areas where they may cause tripping.
MDVR can play back recorded images and video to a connected display monitor. Output connec-
tion choices are DVI-D, VGA, and CVBS.
MDVR back panel
MDVR back panel
Connect input
video signals here.
Connect a video
display here.

English - 13
FSN1949 - 4/2014
MDVR back panel
Connect Power
Connect Audio and Mechanical Switch
Only use the specied plug and voltage. Power requirements are: AC 100~240V / 50~60Hz , 2A(max).
Use the supplied 6 ft. hospital grade AC power cord. Improper power may cause electric shock or
equipment damage. To avoid the risk of electric shock, this equipment must only be connected
to a power supply with protective grounding.
Use the Audio In jack to connect an input sound device, such as a media player or microphone.
This will allow sound to be added to video recordings. The Audio Out jack is for hearing playback
of recorded sound.
The Pedal jacks (capture and record) are for connecting remote switching devices, such as a foot
pedal or an endoscopic camera system’s control features.

14 - English
FSN1949 - 4/2014
Connect A Remote Control Device
The preferred way to record images and video with MDVR is by connecting a remote control
device, such as a touch screen tablet. For specic instructions, please refer to the user guide that
accompanies the remote control device that will be connected to MDVR.
Example:
Touch screen tablet connection
using a wireless router. For specic
instructions, see the user guide for
the remote control device that will be
connected to MDVR.
Example:
Direct wire touch screen tablet con-
nection. For specic instructions, see
the user guide for the remote control
device that will be connected to
MDVR.

English - 15
FSN1949 - 4/2014
Most features in the MDVR unit are intuitively handled by a remote control device, such as a
touch screen tablet and interface software. Capture and record functions are designed for easy
end user operation via the tablet interface. There are a few conguration settings that can only
be accessed through MDVR’s front keypad and LCD. Following is a list of features found in MDVR,
followed by the methods that are available for use.
MDVR Feature Main User Primary Operation Secondary Operation
Capture Image OR Sta Tablet Front panel keypad
Record Video OR Sta Tablet Front panel keypad
Enter Patient Info. OR Sta Tablet
View Recorded Files OR Sta Tablet
Play Recorded Files OR Sta Tablet
Send Files to Media OR Sta Tablet
Send Files to FTP OR Sta Tablet
Convert to DICOM OR Sta Tablet
Set File Type Installer or Admin. Tablet
File Server Access Installer or Admin. Tablet
Set Input Source/Port Installer or Admin. Tablet Front panel keypad
Time & Date Setting OR Sta Tablet Front panel keypad
DHCP Setup Installer or Admin. Tablet Front panel keypad
Select Input Resolution Installer or Admin. Tablet Front panel keypad
Delete Selected Files OR Sta Tablet
Delete All Files Installer or Admin. Tablet Front panel keypad
Control Device Setup Installer or Admin. Front panel keypad
Network IP Address Installer or Admin. Tablet Front panel keypad
Firmware Version Installer or Admin. Front panel keypad
Internal Space Avail. OR Sta Tablet Front panel keypad
DVD Space Available OR Sta Tablet Front panel keypad
USB Space Available OR Sta Tablet Front panel keypad
System Shutdown OR Sta Tablet Front panel keypad
Please consult the user guide for the remote control device connected to MDVR.
Methods of Operation
Front panel
control keypad

16 - English
FSN1949 - 4/2014
Front Panel Control Keypad (OSD)
The preferred method of altering most features in the MDVR system is the remote control device,
which is usually a tablet. A secondary method for altering most features is maneuvering through
the menus on the small front panel LCD screen by using the control keypad.
Below are funtions and settings that are available through the MDVR front panel LCD and key-
pad.
IPS700A
2013-10-20 14:30
[Current Work]
Video Recording
1. Network IP
192.168.0.1
Home Screen
The home screen shows the MDVR part number
(IPS700A), the date in year-month-day format, and
the time (24 hr.).
Other screens that are idle for 10 seconds will revert
back to displaying the home screen.
Recording
Select CAPTURE to save a still image.
Select REC to begin video recording (red light starts)
Select STOP to end video recording
Status Screens
Press the top arrow pto cycle through the list of
system status information as described below.
1. Network IP is displayed.
2. Firmware version is displayed.
3. Internal disk storage size is displayed.
4. Removeable disk media storage size is displayed.
5. Removeable USB media storage size is displayed.
6. Scaler version is displayed.

English - 17
FSN1949 - 4/2014
Front Panel Control Keypad (OSD)
System shutdown
Shutdown system
1. Input Source
DVI
Shutdown
Press left or right arrow tuto start the shutdown pro-
cedure. Press ENTER to proceed with shutdown. To turn
power o, reach behind the MDVR cabinet and turn o the
power switch located on the back panel of the unit.
Menu Conguration Screens
Press MENU to enter congure mode, then press the top
arrow to cycle through the list of adjustments. Use the
arrow keys and the ENTER key to congure each setting as
described below.
1. Input Source
Press left or right arrow tuto cycle through source types. Press ENTER to nish.
2. Time Setting
Press ENTER to begin.
Press up or down arrow pq to select the rst number of the year, then select ENTER. Continue until the year-
month-day, and time (24 hr.) settings are complete. Press ENTER to nish.
3. DHCP Setup
Press ENTER to begin.
Press left or right arrow tuto turn DHCP on or o. Press ENTER to nish.
4. Res. Select
Press left or right arrow tuto cycle through input resolutions. Press ENTER to nish.
5. CTRL Device
Press left or right arrow tuto choose between wireless or wired (UART) control device connection. Press
ENTER to nish, the system will reboot.
6. Auto Adjust
Press ENTER to auto adjust analog settings.
7. Analog CSC
Press left or right arrow tuto choose between RGB and YUV settings. Press ENTER to nish.
8. Audio Input
Press left or right arrow tuto choose between Line In and Mic settings. Press ENTER to nish.
9. Pedal Type
Press left or right arrow tuto choose pedal type 1-4. Press ENTER to nish.

18 - English
FSN1949 - 4/2014
General Specication
Input/Output Specication
Item Description Unit
Model IPS7000A (Signal processor for Medical)
Input DVI‐D ,VGA, CVBS, S‐VIDEO Port
Output DVI‐D, VGA, CVBS Port
Control key 9 button (CAPTURE, REC, STOP, SELECT, UP, DOWN,
PLUS, MINUS, MENU)
OSD language English
Power AC 100~240V / 50~60Hz , 2A(max)
Serial communication RS-232C, 115200 baud Rx
Network Ethernet TCP/IP 10/100 base TX (Auto sensing)
Compliance & Certications UL 60601‐1, EN 60601‐1‐1‐2,CE, CAN/CSA C22.2
NO.601, FCC Part 15, class I medical device , RoHS
Size (H x D x W) 382 (15.039)x 354.2 (13.945) x 80 (3.149) mm/(inch)
Weight 4.8 / 10.582 Kg/Ibs
Item Type Signal Name Supported Resolution Application
Signal
Input
VIDEO (BNC,SVHS) CVBS x 1
SVHS(Y/C) x 1
NTSC / PAL Room Camera,
SD Endoscopy
ANALOG (DSUB15) DSUB Analog x 1 Up to
1920x1080/60Hz
Endoscopic Camera
DIGITAL (DVI24) Digital DVI‐D x 1 Up to
1920x1080/60Hz
Endoscopic Camera
Signal
Output
VIDEO (BNC) CVBS x 1 NTSC Surgical/Diagnostic
Monitor
ANALOG (DSUB15) DSUB Analog x 1 Up to
1920x1080/60Hz
Surgical/Diagnostic
Monitor
DIGITAL (DVI24) Digital DVI‐D x 1 Up to
1920x1080/60Hz
Surgical/Diagnostic
Monitor

English - 19
FSN1949 - 4/2014
Input/Output Connector Specication
Pin No. Assignment Pin No. Assignment
1 Red 9 No Connection
2 Green 10 Ground-Sync
3 Blue 11 Ground
4 Ground 12 DDC Data
5 DDC 5V Standby 13 H.Sync
6 Ground-Red 14 V.Sync
7 Ground-Green 15 DDC Clock
8 Ground-Blue
Pin No. Assignment Pin No. Assignment
1 T.M.D.S. Data2 13 No Connection
2 T.M.D.S. Data2+ 14 +5V Power
3 T.M.D.S. Data2 Shield 15 GND
4 No Connection 16 Hot Plug Detect
5 No Connection 17 T.M.D.S. Data0
6 DDC Clock 18 T.M.D.S. Data0+
7 DDC Data 19 T.M.D.S. Data0 Shield
8 No Connection 20 No Connection
9 T.M.D.S. Data1- 21 No Connection
10 T.M.D.S. Data1+ 22 T.M.D.S. Clock Shield
11 T.M.D.S. Data1 Shield 23 T.M.D.S. Clock+
12 No Connection 24 T.M.D.S. Clock
Pin No. Assignment
1 Composite
2 Ground
1 S-VIDEO /Y (Luminance)
2 S-VIDEO /C (Chrominance)
3 Ground

20 - English
FSN1949 - 4/2014
Input/Output Timing
Resolution Horizontal Frequen-
cy (KHz)
Vertical Frequency
(Hz) Pixel clock (MHz)
640 x 350 @70Hz 31.469 70.087 25.175
640 x 400 @60Hz 31.469 59.941 25.175
640 x 480 @60Hz 31.469 59.940 25.175
640 x 480 @75Hz 37.500 75.000 31.500
800 x 600 @56Hz 35.156 56.250 36.000
800 x 600 @60Hz 37.879 60.317 40.000
800 x 600 @72Hz 48.077 72.188 50.000
800 x 600 @75Hz 46.875 75.000 49.500
1024 x 768 @60Hz 48.363 60.004 65.000
1024 x 768 @75Hz 60.023 75.029 78.750
1152 x 864 @60Hz 54.348 60.053 80.000
1152 x 864 @75Hz 67.500 75.000 108.000
1280 x 720 @60Hz 45.000 60.000 74.250
1280 x 960 @60Hz 60.000 60.000 108.000
1280 x 1024 @60Hz 63.800 60.000 108.000
1280 x 1024 @75Hz 79.976 75.025 135.000
1600 x 1200 @60Hz (**) 74.077 59.981 130.375
1920 x 1080 @60Hz 67.500 60.000 148.500
DVI, VGA input timing
DVI, VGA output timing
Resolution Horizontal Frequen-
cy (KHz)
Vertical Frequency
(Hz) Pixel clock (MHz)
720 x 480 @60Hz 31.500 60.000 27.000
1280 x 720 @60Hz 45.000 60.000 74.200
1920 x 1080 @60Hz 67.500 60.000 148.500