FSR HD-HSC-SP-RX User manual

Version: V1.0.0
244 Bergen Boulevard, Woodland Park, NJ 07424 Tel
973-785-4347 FAX [phone] Web: www.fsrinc.com
43231 LIT1663
HD-HSC-SP-RX
100m 4k HDBaseT Receiver with 4k@60Hz Scaler

Important Safety Instructions
.

3
FCC Warnings
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

4
Table of Contents
Overview
Features
Package Contents
Specifications
Panel Description
Control the Display
Control the Source
Using RS232 Port for Serial Communication
Warranty Terms and Conditions

5
Introduction
Overview
The HD-HSC-SP-RX is a 100m 4k HDBaseT Receiver with an integral
4k@60Hz Scaler. The unit is capable of the distribution of uncompressed
4k@60Hz 4:2:0 UHD video, Digital Coax and Analog Stereo audio, Ethernet,
RS232 and Bi-directional IR together up to 100m/330ft over a single CATx
cable.
With the 4k@60Hz scaler built in, it combines the benefits of an
extended-distance HDBaseT receiver with the capabilities of automatic
display control by CEC or RS232, volume adjustment, Ethernet routing and
optional third-party control. When working with a presentation switcher, it
creates a standalone AV switching and control system with video scaling for
classrooms and collaboration systems.
It is suitable for any application where high quality video scaling or 4k-1080p
down-scaling is required due to the mixed use of displays with different
resolution capabilities, aspect ratios, and timings.

6
Features
HDBaseT receiver with 4k@60Hz (4:4:4) scaler built in and HDCP 2.2
compliance
Supports 1080P@60Hz up to 100m, 4k@60Hz 4:2:0 / 4k@30Hz 4:4:4 up
to 70m over Cat5e/Cat6.
HDMI audio de-embedded output with unbalanced stereo option.
Built in 2-port Ethernet switch with Telnet control
Bi-directional IR, RS232 and Ethernet pass through
Supports PoH and PSE module built in to power HDBT transmitter with
48V PD
HDBT scaling out supports auto-scaler by default, or output resolution
adjustment by API
Built in CEC controller on the HDMI output
Built in configurable controller for display control.
Provides automatic Power on / Power off of the Display Device by
sensing the input signal and sending CEC or user configurable RS-232
commands.

7
Package Contents
1 x HD-HSC-SP-RX Receiver
1 x Power Supply (DC 12V 3A)
1 x AC Cord
2 x Pluggable Screw Terminal Connectors (3.81mm 3 Pin)
1 x IR Emitter
1 x IR Receiver
1 x Mounting Brackets (Pair)

8
Specifications
Technical
Input
HDBT
Input Signal Type
HDBT
Input Resolution
VESA:
800x6008, 1024x7688, 1280x7688,
1280x8008, 1280x9608, 1280x10248,
1360x7688, 1366x7688, 1440x9008,
1600x9008, 1600x12008, 1680x10508,
1920x12008
SMPTE:
720x480P7,8, 720x576P6,
1280x720P6,7,8, 1920x1080P6,7,8,
3840x2160P2,3,5,6,8*, 4096x2160P2,3,5,6,8*
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,
4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz,
7 = at 59.94 Hz, 8 = 60 Hz * = 4:2:0
Input Video Level
0.5-1.2 V p-p
Output
1 x HDMI
1 x L/R OUT
Output Signal Type
HDMI: TMDS
Audio Output Format
L/R OUT:PCM 2.0.
Output Resolution
VESA:
800x6008, 1024x7688, 1280x7688,
1280x8008, 1280x9608, 1280x10248,

9
1360x7688, 1366x7688, 1440x9008,
1600x9008, 1600x12008, 1680x10508,
1920x12008
SMPTE:
1280x720P8, 1920x1080P8,
3840x2160P5,8
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,
4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz,
7 = at 59.94 Hz, 8 = 60 Hz;
Video Impedance
100Ω
Maximum Pixel Clock
594MHz
Control
Control Method
Telnet and RS232 control
General
Operating Temperature/RH
32°F ~ 113°F (0°C ~ 45°C)
10% ~90%, non-condensing
Storage Temperature/RH
-4°F ~ 140°F (-20°C ~ 70°C)
10% ~90%, non-condensing
Power Supply
DC 12V 3A
Power Consumption
21.5W (Max)
ESD Protection
Human-body Model:
±8kV(Air-gap discharge)/
±4kV(Contact discharge)
Device Dimension
(W x H x D)
234.4. mm x 25mm x 143mm
Product Weight
0.9kg
Certification
CE, FCC

10
Cable Specifications
Note: FSR recommends use of straight-through Category cables wired to
T568B standard and use HD-HSC-SP-RX with a Transmitter which also
supports 100m.
Cable Type
Range
Supported Video
Cat5e/6
100m/328ft
1080p@60Hz 36bit
70m/230ft
1080p@60Hz 3D
4k@30Hz YUV4:4:4, 4k@60Hz
YUV4:2:0
Cat6a/7
100m/328ft
1080p@60Hz 36bit
1080p@60Hz 48bit
1080p@60Hz 3D
4k@30Hz YUV4:4:4, 4k@60Hz
YUV4:2:0