FTE PVR ST180 User manual

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 1- PVR ST180 Version en_1.0 FTE maximal
Index
Chapter 0 Control elements and connections
0.1. Receiver front panel..................................................................................................................... 4
0.2. Receiver back panel...................................................................................................................... 5
0.3. Remote control............................................................................................................................. 6
Chapter 1 First installation
1.1. Complete Content…...................................................................................................................... 7
1.2. Accessories .................................................................................................................................. 8
1.3. Safety rules.................................................................................................................................... 9
1.4. Fast installation guide.................................................................................................................. 10
1.5. Menu overview............................................................................................................................. 16
Chapter 2 Standard functions
2.0. Switch on the receiver.................................................................................................................. 17
2.1. Standby……………………............................................................................................................. 17
2.2. Teletext....................................................................................................................................... 17
2.3. Mute……........................................................................................................................................ 17
2.4. Numeric keyboard on remote control......................................................................................... 17
2.5. Switch channels............................................................................................................................ 17
2.6. Change between TV and Radio channels................................................................................... 17
2.7. Volume........................................................................................................................................... 17
2.8. Stop functions…........................................................................................................................... 18
2.9. Open Main menu........................................................................................................................... 18
2.10. Watch the last viewed channel.................................................................................................... 18
2.11. Channel list.................................................................................................................................... 18
2.12. EPG Electronic Program Guide................................................................................................... 18
2.13. Favourite channel list.................................................................................................................. 19
2.14 Menu Audio................................................................................................................................... 19
2.15. Signal and channel information.................................................................................................. 19
2.16. Changing favourite channels ...................................................................................................... 19
2.17. Zoom Function.............................................................................................................................. 19
2.18. Subtitle........................................................................................................................................... 20
2.19. Short-circuit protection................................................................................................................ 20
2.20. Fast record..................................................................................................................................... 20
2.21. Time Shift ……………………….....................................................................................................20

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 2- PVR ST180 Version en_1.0 FTE maximal
Chapter 3 Channel management
3.1 TV-Channel list.............................................................................................................................. 21
3.1.1. Skip channels................................................................................................................... 21
3.1.2. Lock channels...................................................................................................................21
3.1.3. Delete channels................................................................................................................ 21
3.1.4. Delete channels groups or all channels......................................................................... 22
3.1.5. Edit Channel......................................................................................................................22
3.1.6. List of favourite channels…………………………........................................................... 22
Chapter 4 PVR management
4.1 Play record..................................................................................................................................... 23
4.2 Lock record……............................................................................................................................ 23
4.3 Delete record................................................................................................................................. 23
4.4 Movies, MP3, Photos.....................................................................................................................23
4.5 Sorting........................................................................................................................................... 24
4.6 HDD management......................................................................................................................... 24
4.6.1. Folder management......................................................................................................... 24
4.6.2. Delete folder..................................................................................................................... 24
4.6.3. Lock folder........................................................................................................................ 24
4.6.4. Add folder..........................................................................................................................25
4.6.5. Move file............................................................................................................................ 25
Chapter 5 Timers
5.1 Sorting............................................................................................................................................ 26
5.2 Delete Timer …….......................................................................................................................... 26
5.3 Edit / Add Timer ............................................................................................................................ 26
Chapter 6 Tools
6.1 Calculator....................................................................................................................................... 28
6.2 Calendar……................................................................................................................................. 28
Chapter 7 System settings
7.1. Menu Language............................................................................................................................. 29
7.2. Audio Language............................................................................................................................ 29
7.3. Time Zone...................................................................................................................................... 29
7.4. TV Settings.................................................................................................................................... 30
7.5. Recording Settings....................................................................................................................... 31
7.6. OSD Settings................................................................................................................................. 31
7.7. Geographical location...................................................................................................................31
7.8. Version........................................................................................................................................... 32
7.9. Factory Default.............................................................................................................................. 32
7.10. Software upgrade......................................................................................................................... 32

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 3- PVR ST180 Version en_1.0 FTE maximal
Chapter 8 Parental Control
8.1. Set Lock..........................................................................................................................................33
8.2. Channel Lock................................................................................................................................. 33
8.3. Record Lock.................................................................................................................................. 33
8.4. Installation Lock............................................................................................................................ 33
8.5. Change Password......................................................................................................................... 33
Chapter 9 Installation
9.1. Satellite Management ….............................................................................................................. 34
9.2. Antenna Configuration................................................................................................................. 35
9.3. Transponders Management......................................................................................................... 35
9.4. Channel Search: Satellite............................................................................................................. 36
9.5. Antenna power.............................................................................................................................. 37
9.6. MUX Management......................................................................................................................... 38
9.7. Channel Search: Terrestrial..........................................................................................................38
9.6. SatcoDX Update.............................................................................................................................39
9.7. Backup............................................................................................................................................39
Chapter 10 Equipment Features
10.1. Technical data............................................................................................................................... 40

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 4- PVR ST180 Version en_1.0 FTE maximal
Chapter 0 Control elements and connections
0.1. Receiver front panel
1 2 3 4 5 6 7
1 POWER: Switches the receiver ON or in Standby mode. For total switching off, use the main
switch at the back side of the receiver.
2 STAND-BY-LED: Shows if the receiver is in Standby mode (when LPC mode is ON).
3 LOCK LED: Indicates a sufficient signal level at the input.
4 DISPLAY: 4 Digits to display the program numbers.
5 IR-SENSOR: Reception device for signals coming from the remote control.
6 Front cover: Cover for USB 2.0 connector. There are no card readers installed inside.
7 Front Buttons: Buttons for administrating, the buttons have the same functions like the buttons on
the Remote Control.

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 5- PVR ST180 Version en_1.0 FTE maximal
0.2. Receiver Back Panel
1 2 3 4 5
6 7 8 9 10
1 IF IN: Satellite input.
2 ANTENNA IN: Terrestrial input of the digital tuner.
3 RS-232: Serial port to update the firmware of the receiver.
4AC IN: Power cord 230VAC/50Hz.
5 POWER ON/OFF: Main switch to switch off totally the receiver
6 IF OUT: Satellite output for cascading to other devices.
Note: The operation of another receiver at the same time is only possible with limited
channel selection.
7 LOOP OUT: Terrestrial output for cascading to others devices.
8 TV SCART: SCART output for connecting one TV set, mode RGB or CVBS selectable.
9 VCR SCART: SCART connector for video recorder, DVD recorder or DVD player.
10 S/PDIF: Coaxial output for digital audio (AC3).

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 6- PVR ST180 Version en_1.0 FTE maximal
0.3. Remote Control
1. POWER: Switches receiver ON or in stand-by-mode.
2. 3-set LED: Shines as function control,
showing the selected transmission code 1, 2 or 3
3. TV/R: Switches between TV and Radio channels.
4. CODE: Changes transmission code of the remote control.
5. MUTE: Switches audio on and off.
6. NUMERIC KEYS: For direct typing values and names.
7. INFO: Shows channel information with signal bar.
8. : Starts Picture In Picture function.
9. VOL+ VOL-: Adjusts audio volume up and down.
10.CH+ CH-: Changes channel up and down.
11.Back: Watch the last viewed channel.
12.EXIT: Exit menus or stop operations.
13.EPG: Shows the EPG information.
14.MENU: Opens the main menu.
15. :Confirms selections or opens channel list.
16. :Adjusts audio volume or controls the cursor in menus.
17. :Changes channels volume or controls the
cursorinmenus..
18. : Quick start for recording.
19. : Opens PVR menu.
20. : Start / Stop button for recording and TimeShift.
21. : Stop button for recording and TimeShift.
22. : Backward button for recording and TimeShift.
23. : Forward button for recording and TimeShift.
24. : Places marks within recording process.
25.List: Opens channel list.
26.Audio: Opens audio menu.
27.Fav: Opens favourite channel list.
28.App: Without function currently.
29.Sub: Switches subtitle on and off.
30.TEXT: Opens and closes teletext.
31.Pup Pdw: Moves cursor in block steps
32.Zoom: Zoom function.
33.Fav+ Fav-: Moves favourite channel up and down.
34.Color Keys: Controls menu options.
►II
◄◄
►►
■
PVR
MARK
REC
PIP
OK
1 2
7 8
9 10
11
12
22
16
21
24
18
13 14
15
19
2320
1717
6
3 4 5
16
25 26 27
28 29
30 31 32 33
34
Back: Battery box

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 7- PVR ST180 Version en_1.0 FTE maximal
1. First installation
1.1 Complete Content
The following goods must be included in this package when you open it for the first time.
Remote Control Installation Guide Two batteries
Type AAA, Micro, 1,5V
CDROM

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 8- PVR ST180 Version en_1.0 FTE maximal
1.2 Accessories
DIGIMAX Active DVB-T- outdoor antenna Code: 9002029
LOG3235F1 VHF-UHF DVB-T- outdoor antenna Code: 0203236
DVB-T Antenna Active DVB-T- indoor antenna Code: 9002024
DVB-T Photo Antenna Active DVB-T- indoor antenna Code: 9002028
with picture frame
PR 80AB Offset Dish 80cmØ Code: 0798021
LNC 54U LNC universal single Code: 0400065
UMS 125 DiSEqC Switch Code: 0702218
LG 229 DVB-T Mast Amplifier Code: 9000329
MF 103 Mixer Terr-SAT Code: 9000104
LPS 1222 Power Supply Code: 9901222
AO 90S 3 connectors outlet Code: 0500094

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 9- PVR ST180 Version en_1.0 FTE maximal
1.3 Safety rules
Please read the manual carefully before using the receiver.
You will receive a lot of information to use this product correctly and you will prevent incidents.
Please keep the manual on a safe place.
This sign warns you about
high voltages, with risk
of electric shock
Caution: Do not open the housing of
this receiver. Repairs can only be
made by professionals authorized by
Fte maximal. If not, warranty will not be
valid anymore.
This sign informs about
special information which is
important to know.
Caution: Keep this receiver far away from liquids. Do not place it on placements close to water like flowers
vases, wash basin, aquariums or pools. It exists a high risk of electric shock when water or high humidity
filters inside the receivers. Never place other devices on it; they can overheat the receiver as well as daring
fire risk. The receiver must be used only with original power cord to 230V main plug.
Please read carefully this manual and do not hesitate to contact to professional help if you have any doubt.
Opening the receiver housing as well as the Hard Disk case will mean a total lost of warranty.
Installation:
1. Never work during a thunderstorm or staying near of the antenna systems.
2. Before adjusting the receiver, make sure that your antenna is well aligned and works properly.
3. Unplug the main connection (230V) every time you work with receiver connections. Do it also when you stay
away for a long time out of home like in holiday periods.
4. The best placement for the receiver is close to the TV and your other equipment like DVD, VCR, CD, and game
stations. Select a stable place where you can make the necessary connections in a safety way.
The 230V main plug should be in a place easy to reach, that you can unplug it when it is necessary.
Cleaning: Before cleaning the receiver with a slightly damped cloth, please disconnect the main 230 V connection from
the receiver. Please use only mild cleaners.
Accessories: Please, do not use accessories which are not agreed by the manufacturer of the receiver.
Unsuitable accessories could increase the risk of getting on fire, an electrical impact or other damages.
Placement: Select a placement where the Receiver has air circulation enough, otherwise it may have overheating
accumulation. Do not cover the openings of the housing. Unsuitable placements are also places close to heaters or soft
locations like e.g. sofas and beds.
Power connection: Select a main plug with easy access, in case of unplugging necessity; it will be easier and faster.
Please, make sure that the cord as well as the plug is in perfect conditions. Do not pull the cable, use always the plug.
Housing: Please, make sure that no liquid will filter into the housing of the receiver. If so, disconnect immediately the
receiver from the main 230 V plug and bring the receiver to a professional.
Air humidity: When you take the Receiver from a cold to a warm place, please wait until the receiver gets the same
temperature as the new environment, in order to avoid problems of humidity condensation.
Maintenance / Repairing: Within the warranty time all the repairing processes should be done by Fte Maximal technical
staff. Otherwise, the warranty will be lost.
RISK OF ELEKTRIC SHOCK
DO NOT OPEN
CAUTIONR

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 10 - PVR ST180 Version en_1.0 FTE maximal
1.4 Fast installation guide
Please, follow the instructions for a faster and simpler installation of the receiver.
Step 1: Connections
Connect the cable from the LNB and Dish:
Connect the cable with the Satellite signal to the IF IN input of the receiver.
Connect the cable of the terrestrial antenna:
Connect the cable with the Terrestrial signal to the ANTENNA IN connector.
Connecting the TV, LCD or video beamer
Your TV or other equipment can be connected in different ways:
SCART / RGB In this connector you will find the best Picture quality in RGB and RGB-YUV modes.
This is the connector that you will use normally to connect the TV.
To do it, you should use a Standard SCART – SCART cable.
Video / DVD In regards to scart VCR-Scart connection, you can connect a VCR or a DVD.
The DVD signal can also be watched through the receiver if the TV is connected using
a Scart.
You will find more information in the chapter 7.4 – System adjustments.
Output LOOP OUT You can connect this output to the antenna input of your TV or VCR to receive the
analogue terrestrial signal.
You can find more detailed information in the chapter 0.2 Back Panel
This receiver has a main switch at the back panel.
If you see a message “shortcircuit in the antenna” in the screen, you have a shortcircuit
in the antenna. Please, verify it and restart the receiver.
When you configure the system for the first time, the current date will be stored in Menu > System Preferences >
Version as the warranty start time.
Second Step: Main settings on the receiver
When you start the first time the receiver or when you execute a “factory default” process, you will see this
installation guide in English language.
The selection of the menu options will be done with the arrow buttons , and the button
OK of the remote control.
Your remote control disposes of 3 different code tables for the communication with the receiver. By default,
the selected table is the number 1, which corresponds to the Satellite reception equipment. Normally it
should not be changed when the batteries are installed for the first time.
Please, verify that when you push whatever key, the lighted code is the 1. In other case, use the CODE
key to modify this selection.

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 11 - PVR ST180 Version en_1.0 FTE maximal
Menu Language:
Here you have to select the language for the Receiver menu and information.
Select the language with the arrow buttons and press the OK button.
Time Zone:
In order to the receiver is able to display the correct time and adjust the
timer recordings correctly, it is needed to fix the time zone to the place you live.
Select here the time delay according to your position comparing to
Greenwich Time.
In UK: Summer time: +1 hours
Winter time: GMT hour
Select with the arrow buttons and press the OK button.
Geographical Location:
To adjust the positioners of the antenna, it is recommended to have the
Latitude and Length of your location.
It is not absolute needed to introduce these data.
You can look out the following map in order to know this data:

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 12 - PVR ST180 Version en_1.0 FTE maximal

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 13 - PVR ST180 Version en_1.0 FTE maximal
Selection of the satellite list of channels pre-loaded
This option allows loading the channel list stored in your receiver, and
you will not need to tune channels. The list includes Astra / Hot Bird /
Hispasat / Turksat channels, and it is supposed that the same input
signal is available in both inputs.
If you select Load Channel List, the installation assistant finishes at this
point and it begins the viewing of the channels.
In case of having a different configuration, please select Tune new
channels and continue with the installation assistant, configuring the antennas.
Antennas configuration:
In this menu, you should configure the connected signals in the IF
IN of your PVR.
By default, the equipment comes with the configuration that you
can see in the Picture, with four satellites.
The available options in this screen allow:
Red Button: Deletes the selected satellite. It asks for confirmation.
Green Button: Edits the selected satellite. The options appear at
the image below.
Yellow Button: Adds a satellite. The options appear at the below
image.
Antenna Options:
- LNB Type: There are two available bands: C and Ku.
The differences basically are the frequencies in the
transmission. The Ku band has two possibilities; the
most common is the Universal Ku.
- Satellite: Your PVR disposes of several pre-configured
satellites. You can find the one you want in the list or
add a new one. They are sorted by its orbital position.
- Low Band / High Band: It is used when the band
selection is the Ku, and it programmes the local
oscillators of the LNC.
- DiSEqC 1.0 / 1.1 Port: To configure the use of switches.
- Motor: Activates the motor option to direct the antenna.
- 22 KHz: tone of switching the band of the LNC.
- LNB Power: LNB Feeding. By default the selection is for
an Universal LNB.
- Signal: It shows if there is available signal in this
selected configuration.
Alter whatever change, it should be confirmed with the OK key when you exit the menu.

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 14 - PVR ST180 Version en_1.0 FTE maximal
Channel Search: Satellite:
Once the antenna configuration is completed, you should proceed to
tune the satellite channels that you have selected. There are different
ways to tune the channels: through LNB, through Satellites and
through Transponders.
When you select the channel searching through LNB, you only can
select one LNB.
When you are searching by satellites, you are allowed to select a Wide
range of satellites, so you could programme the searching of all the
satellites that you have configured.
The searching through Transponder is the most selective. It allows selecting all the frequencies that you’re
going to tune and searching channels.
In whatever selection, you always will have available to search Free To Air channels (uncoded channels),
channels with Conditional Access or All the channels.
Please, choose the searching pressing the Green button. Once you have finished (the time will depend on
the number of transponders it will have to find) you will get a window like the following one:
DetectedTV Detected
Channels Radio Channels
Level and Quality
Searching process
Meter
You can select the channel searching whenever pressing the Exit button.
Once the searching is finished, you must confirm the storing of a new Channel List.
Press the OK button.
The receiver will come back to the Channel Search menu.
You can search again if you want, or exit by pressing the Exit button.

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 15 - PVR ST180 Version en_1.0 FTE maximal
Channel Search: Terrestrial:
This receiver has no pre programmed terrestrial channel list, because
DVB-T configuration changes in every different area.
Start the channel searching process by pressing the Green Button.
The receiver searches now in all TV frequencies.
You may stop searching by pressing the button Exit .
Once the search is finished, you must confirm if the new found channels have to be stored.
Press for confirm the OK-button.
Now you come back to menu Channel Search.
You can start a new search again, or you can close the menu now with the button Exit .
Here it finishes the Fast Installation Guide.
Search status
Current channel
Radio Channels
detected
Channels which the receiver
has found, currently 11
Signal Power and Quality
meter related to the selected
frequency

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 16 - PVR ST180 Version en_1.0 FTE maximal
1.5 Menus
Main Menu
Channel Management
Parental control
Move, rename or delete channels,
Program and, create favourite list.
Activate parental control.
PVR Management
Tools Installation
Administration for recordings,
Pictures and MP3 files as well as
connecting external USB devices.
Calculator,
Calendar with date management.
Receiver and antenna settings
Search channels
Frequency manager
Backup
Timers
System Settings
Administration for recordings,
manual activation for timer events.
Main settings for receiver
for OSD and adapt TV set
Factory default
Software upgrade

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 17 - PVR ST180 Version en_1.0 FTE maximal
Chapter 2 Standard Functions
2.0 Switch on the receiver
The receiver has a main switch at the back panel. To switch on, take the switch in position 1.
Now the receiver begins to run and show information on its display.
2.1 StandBy
To switch the receiver from Standby (sleep mode) to the working mode, press Orange Power button on the left corner
at the top of the remote control.
If the receiver had been working before and you did not switch on by main switch, the receiver show the last displayed
channel.
When you press it again, the receiver goes back to the stand by mode.
2.2 Teletexto
The button Text opens the teletext generator.
Automatically the receiver loads page 100 as standard.
Like in your TV set you can open the pages by pressing the buttons 0-9.
If you want to open, for example, the page 140, you
have to press the buttons 1 – 4– 0.
When you want close the page, press Exit.
2.3 MUTE
With this function, you will be able to shut down the audio completely.
To do it, press the button Mute and the warning symbol will be displayed.
By pressing again the button Mute the function will be disabled.
2.4. Numeric block on remote control
In regards to the numeric block in the remote control, you can select directly the channels when you know the stored
program place.
If you want for example place 23, you have to press the buttons 2 and 3 and after the button OK.
2.5. Switch channels
With the buttons CH+ / CH- or you can change the channels also.
Press one button for getting one channel up or down.
2.6. Change between TV- and Radio channels
When you want change between TV and Radio channels, you have to press the button TV/R on the remote control.
2.7. Vol+/Vol- Volume
With the buttons Vol+ / Vol- or you can regulate the audio volume.
To do it, you will see a graphic like the one at the left side.
For using this function properly, you need to make an alignment with you TV set.
Turn off the volume of the receiver. For this, press the button MUTE on remote control. Now turn up the volume on TV
until the moment you hear a noise. Now turn down the volume until the noise disappears. Normally this is around 50-
75% of the total volume of the TV set.
Para ver esta película, debe
disponer de QuickTime™ y de
un descompresor TIFF (sin comprimir).

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 18 - PVR ST180 Version en_1.0 FTE maximal
2.8. Stop the functions
With the Exit button you can stop functions like channels search or close menus.
2.9. Open Main menu
To open the main menu, you have to press the button MENU .
The menu system is made in a tree structure.
2.10. Watch the last viewed channel
With the Back button, you can access to the channel viewed previously.
2.11. Channel list
When all the menus are closed, you can open a channel list by pressing
the button OK.
With the button TV/R you can switch between TV and Radio channels.
With the button FAV you can sort this list as follows:
POS, Position in channel list
Name, by alphabetic sort
FTA / CAS sort by free or coded channels
If the position or the name of the channel fits, you can carry out a searching.
Press the Green button to select the searching mode until the symbol (…)
appears in the row Pos or Name, and introduce the characters with the
alphanumeric keyboard.
The handling of the keyboard is like in a mobile phone.
When you press one button several times you will have different results.
Example: If you press button 2: a, b, c and 2
With RED button change between normal and capital letters.
You will get a channel list with the information requested.
With the EPG button, you can filter the channels shown in the list.
A new Windows appears in the screen where all the satellites configured in the
input of the receiver are shown.
You can select only the channels of one concrete satellite, the terrestrial
channels, or all the channels.
In this window, if you press List you will change the sort of the list (by name, or
by angle).
2.12. EPG Electronic Program Guide
By pressing the button EPG you will start the electronic program guide.
The receiver gets the information of the tuned channel. The information
only will be available in case the broadcaster transmits it.
With the buttons you can select a channel and with one
event. The Blue colour field highlights the current selected event and the
Red line shows the current time.
With the Yellow button you can mark one event. The receiver will switch to
this channel once the event has begun. If you select an event which has already
started, the receiver switches to this channel immediately.
Using the REC button (over and event) the receiver will record this event
into the internal hard disk.

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 19 - PVR ST180 Version en_1.0 FTE maximal
Pressing the button INFO you will get more detailed information about the event.
With the arrow buttons you can move along the text.
2.13. Favourite channel list
If no menu is opened, you can get your favourite channels list by pressing
the button FAV .
With the buttons Pup / Pdw you can switch between 8 different lists, if you
have marked channels before. With the buttons you can
select a channel from this list.
2.14. Menu Audio
If all menus are closed you can open the menu Audio by pressing
the Audio button.
You can change here the audio output in Stereo, Left and Right
audio format..
Testing the channels, you will be able to make the most suitable selection.
Standard selection is Stereo.
2.15. Signal and Channel information
Pressing the INFO button, with no menu activated,
you will see the channel information and the Signal Level Bar.
information is the same that appears when you change the channels.
In the signal bar we can see the following information:
Channel Number, Channel Name, current Time and Date,
Name of the current event and brief description given by EPG.
Start and Stop time of the event and the indication of the current time from the beginning in yelow color.
This menu disposes of 2 keys of advanced functions. Blue and Yelow
keys. Through Blue key, you cand get the technical information of the
shown channel at the top part of the window, as you can see in the
image:
Yellow key allows seeing which will be the next event indicated by
EPG, with its start and stop times.
2.16. Changing favourite channels
With the buttons FAV+ and FAV- you can switch the favourite channels
directly.
The Sequence for the channels is the established one before in main channel
list.
2.17. Zoom Function
With the Zoom button you can see more details of the image.
By pressing the button OK you can select the enlargement.
If you want to stop, please press Exit

User’s Manual · PVR ST180
Reserved of technical modifications and/or errors - 20 - PVR ST180 Version en_1.0 FTE maximal
2.18. Subtitles
When no menu is opened, you can start with Sub button the subtitle function.
Subtitles only can be displayed when the operator transmit them.
2.19. Short-circuit protection
If you see one message like this, you have a short circuit or to high power
in the antenna system.
In this case switch off the receiver and check the system.
The displayed information stops automatically when the problem is solved.
2.20. Fast record
If you want to record one event immediately you must press only
the button REC on the remote control. You will see the event as usually
and you will see a red point for a while in screen.
If you press REC more that one time, you can select how long the
record will be.
Selection: 30min, 60min, 90min, 120min, 180min, 240min
If you press only one time the record time will be according your
selection, which will be done in:
Menu > System Settings > Recording settings
2.21. Time Shift
If you want to use time shift function to stop one event, you only need
to press only the button ►II one remote control.
The program stops and it will be stored on the hard disk until you restart to
watch it. The OSD shows you the information about the time delay from the
original event.
When you want continue you only press again ►II.
As the information you see now comes from the hard disk, you can also
use forward and backward functions.
If you press several times ►► you can adjust the speed for forward.
Selection: 2x, 4x, 8x speed .
You also have the option 5m, in this case the receiver moves in 5 minutes steps.
Through INFO Key, you can see the time difference between you playback and the realtime, in an horizontal bar which
appears in the top part of the picture.
The maximum time that the equipment allows recording meanwhile it is paused is for 4 hours.
The red bar is the recorded time, the yellow bar is the played time, the rest of time is the time in Time Shifting mode.
When you exit of the Time Shifting mode, the receiver will give you the
option of storing the Time Shifting in the Hard Disk like a recording.
Press OK to save the recording.