FujiFilm FinePix F31fd User manual

BL00581-200(1) E
Camera Controls
F31
F31
Shutter button
Mode dial
Lens (lens cover)
POWER button Flash
AF-assist illuminator
/Self-timer lamp
Terminal cover
Infrared port
A/V OUT (Audio/
Visual output) socket
USB socket
DC IN 5V socket
Microphone
Indicator lamp
4-direction
(nopq) button
LCD monitor
Speaker
Tripod mount
W(Wide zoom) button
T(Tele zoom) button
w(Playback) button
Photo mode (p) button
Strap mount
MENU/OK button
Intelligent Face Detection
button
DExposure compensation
button
DISP (Display)/BACK button
Battery cover
xD-Picture Card slot
Battery compartment
Battery release catch
FPT/Y-608110-PY
Picture Taking
Refer to Owner’s Manual for more detailed instructions
Battery release catch
Indicators
A. Loading the Battery
Make sure that the indicators are aligned. Push the battery release
catch aside while loading the battery. Check that the battery is firmly
held in place.
C. Setting up the Camera
B. Charging the Battery
Plug the AC power adapter connector into the DC IN5V
socket on the camera.
Plug the connecting cable
into the AC power adapter.
Plug the connecting
cable into the power
outlet.
When connecting is completed, battery charging begins.
Charging ends when the indicator lamp turns off (about 4 hours).
Press POWER down fully to turn the
camera on.
1.
screen appears on the LCD
monitor.
2.
SET
SET
NO
NO
START MENU
START MENU
/ LANG.
/ LANG.
Press n, o, p, or qto select the
language.
Press MENU/OK to confirm the setting.
3.
4.
D. Taking Pictures
Still images that can be viewed on FinePix F31fd
Yo ucan use this camera to view still images recorded on FinePix F31fd
or still images (excluding some uncompressed images) recorded on a
FUJIFILM digital camera that supports xD-Picture Card.
Press POWER down fully to turn the
camera on.
Press the shutter button down halfway to
adjust the focus.
Yo ucan select your preferred date
format.
Press the shutter button down fully to
take a picture. The camera makes a
“Click” sound and takes the picture.
FinePix F31fd has internal memory that can store images without
xD-Picture Card. Use an xD-Picture Card (sold separately) when
recording a large number of images.
Press por qto select Year, Month,
Day, Hour, or Minute. Press nor oto
correct the setting.
✽Refer to the Owner’s Manual for
“Turning On and Off”.
5.
1.
3.
4.
Halfway pressed
Fully pressed
SET
SET
NO
NO
DATE
DATE /
TIME NOT SET
TIME NOT SET
YY.MM.DD
YY.MM.DD
1. 1 12:00
1. 1 12:00
AM
AM
E. Viewing the Images
Press w.
Press por qto move through your
images.
2.
1.
Double
beep
Click
6.
Set the Mode dial to q.
2.
1.
2.
3.
4.

Viewing Images on your PC
For more information
Refer to “How to use FinePixViewer” in the HELP menu, or “Software
Installation” in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the
following website.
( http://www.fujifilm.com/products/digital/ )
For Macintosh users, refer to “Software Installation” in the Owner’s
Manual.
A. Installing Software
Do not connect the camera to your PC until the software
installation is completed.
1. Turn on your PC and start up Windows.
●
! Users of Windows 2000 Professional or Windows XP
should log in by using a system administrator account (e.g.
“Administrator”).
2. Quit all other active applications until no applications are
shown in the taskbar.
3. Load the enclosed CD-ROM into
the CD-ROM drive. The installer
starts up automatically.
4. The Setup screen appears.
Click the [Installing
FinePixViewer] button.
5. After installation completed, press [Close] button.
B. Connecting the Camera to your PC
1. Insert the xD-Picture Card with images into the camera.
2. Connect the camera to your PC using the USB cable
(included).
C. Saving the Images
1. The Save Image Wizard starts up. Click the [Start]button.
2. Check that the files are downloaded from the camera to your
PC and that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2006_1024
2. Select “Preview” in the View menuto display an enlarged image.
D. Viewing the Images
1. Click the [Show List of Images] button.
Windows XP
The “Found New Hardware” help message appears in the
bottom-right corner of your screen. This message will close
when the settings are completed. No action is required.
FinePixViewer starts up automatically.
A.Installing Software
A.Installing Software
B.Connecting the Camera to your PC
B.Connecting the Camera to your PC
C.Saving the Images
C.Saving the Images
AC-5VC
;
USB socket
3. Press wfor about 1 second to turn the camera on in
Playback mode.
4.
Windows 98 SE/Me/2000 Professional
FinePixViewer starts up automatically.
Using Intelligent Face Detection
With Intelligent Face Detection, the subject’s face(s) is detected and focused on
automatically, so youcan take a picture of people in most suitably lit conditions.
Intelligent Face Detection will even detect and focus on two faces on opposite sides of
the frame, where ordinarily the background in the center of the frame would be focused.
In addition, Intelligent Face Detection adjusts for the brightness of the faces.
Push to zoom in on a face when playing back the image taken with Intelligent Face
Detection.
10 / 24 / 2006 10:00 AM
10 / 24 / 2006 10:00 AM
10 / 24 / 2006 10:00 AM
10 / 24 / 2006 10:00 AM