Fujitsu Siemens Computers D1171 User manual

SYSTEM BOARD D1171
SYSTEM BOARD D1171SYSTEM BOARD D1171
SYSTEM BOARD D1171
ADDITIONAL TECHNICAL
ADDITIONAL TECHNICALADDITIONAL TECHNICAL
ADDITIONAL TECHNICAL
MANUAL
MANUALMANUAL
MANUAL

Is there ...
... any technical problem or other
question you need clarified?
Please contact:
• Our Hotline:
Mo-Fr: 8 a.m. - 6 p.m.
Sat: 9 a.m. - 2 p.m.
Tel.: ++49 (0) 180 3777 005
• your sales outlet
The latest information on our products, tips, updates, etc., can be found on the Internet under:
http://www.fujitsu-siemens.com

Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.:
A26361-D1171-Z180-4-7619
A26361-D1171-Z180-4-7619A26361-D1171-Z180-4-7619
A26361-D1171-Z180-4-7619
Printed in the Federal Republic of Germany
AG 0100 01/00
A26361-D1171-Z180-1-7619
SYSTEM BOARD D1171 ADDITIONAL TECHNICAL MANUAL

System Board D1171
Additional Technical Manual
January 2000 edition

Intel, Pentium and Celeron are registered trademarks and MMX and OverDrive are
trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 is a registered trademark of International Business Machines, Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
Copyright ãFujitsu Siemens Computers GmbH 2000
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.

A26361-D1171-Z180-4-7619
Contents
Introduction........................................................................................................................................1
Features............................................................................................................................................2
Mechanics.........................................................................................................................................3
Connectors................................................................................................................................5
Serial chipcard reader or internal serial port 2 (COM 2).....................................................5
Front panel connector........................................................................................................6
USB chipcard reader .........................................................................................................7
Fan 2 connector.................................................................................................................7
Wake On LAN (WOL) connector........................................................................................7
CD-ROM audio connector (internal)...................................................................................8
Auxiliary (MPEG, TV) audio connector (internal)................................................................8
Fan 1 connector.................................................................................................................9
Power supply monitoring....................................................................................................9
Intrusion connector for case open detect for optional push-button (opener).......................9
Configuration...........................................................................................................................10
Functions controlled by the switch block..........................................................................10
USB power ......................................................................................................................10
Power......................................................................................................................................11
Power requirement ..........................................................................................................11
Power loadability..............................................................................................................11
Documentation................................................................................................................................11
Installing drivers ..............................................................................................................................11
Upgrading main memory .................................................................................................................12
Troubleshooting...............................................................................................................................12
Message BIOS update.............................................................................................................12
The screen stays blank............................................................................................................12

A26361-D1171-Z180-4-7619 English - 1
Introduction
i
This system board is available in different configuration levels. Depending on the
hardware configuration of your device, it may be that you cannot find several options in
your version of the system board, even though they are described.
You may find further information e. g. in the complete Technical Manual for the system board and in
the description "BIOS Setup".
Further information to drivers is provided on the supplied drivers diskettes or on the "Drivers &
Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing drivers".

Features
2 - English A26361-D1171-Z180-4-7619
Features
The table shows two assembly versions of this system board as example.
Function Version D1171-A Version D1171-B
Processor socket PGA 370 PGA 370
Processor Intel Celeron or Pentium III Intel Celeron or Pentium
III
Formfactor
µ
ATX
µ
ATX
Front Side Bus in MHz 66/100/133 66/100/133
Chipset i810e i810e
Memory sockets 2 DIMM 2 DIMM
ISA slots - - - -
PCI slots 4 4
ISA/PCI shared - - - -
AGP-Port - - - -
System monitoring x x
Thermal Management x x
Wake On LAN x x
Keyboard On x x
IrDA - - - -
Chipcard reader x x
Save to Disk (ACPI S4) x x
Save to RAM(ACPI S3) x x
LAN onboard x - -
Audio onboard AD 1881 AD 1881
VGA onboard i 810e i 810e
4MB Display Cache x x
!Computer system boards and components contain very delicate IC chips. To protect them
against damage caused from electric static, you have to follow some precautions:
• Unplug your computer when you work inside.
• Hold components by the edge, don't touch their leads.
• Use a grounded wrist strap.
Place the system board and the components on a grounded antistatic pad whenever you
work outside the computer.
Once you have installed the system board, you should remove the battery protection (i.e.
the thin plastic plate between battery and contact spring).

Mechanics
A26361-D1171-Z180-4-7619 English - 3
Mechanics
Layout
µ-ATX 9,6" x 8'' (243,84 mm x 203,2 mm)
Some of the following connectors are optional and may therefore not be included on your system
board.
DIMM 1
DIMM 2
PCI 2
PCI 3
PCI 4
PCI 1
21 3 4 5 6
8
710
911 12
1 = PS/2 mouse port
2 = LAN port
3 = Serial port 1
4 = Parallel port
5 = VGA connector
6 = Game/Midi port
7 = PS/2 keyboard port
8 = USB port B
9 = USB port A
10 = Audio line-out
11 = Audio line-in
12 = Audio micro-in
The components and connectors marked do not have to be present on the system board.

Mechanics
4 - English A26361-D1171-Z180-4-7619
DIMM 1
DIMM 2
PCI 2
PCI 3
PCI 4
PCI 1
21 34 5 6
9
1011
13
7
8
15
16
12
14
1 = Serial chipcard reader or serial port 2
2 = Power supply
3 = IDE drives 3 and 4 (secondary)
4 = Floppy disk drive
5 = Front panel and loudspeake
r
6 = IDE drives 1 and 2 (primary)
7 = USB chipcard reade
r
8 = Fan 2 (e. g. for the processor)
9 = Wake On LAN
10 = CD audio input
11 = AUX audio input
12 = USB power jumpe
r
13 = Voltage indicator LED
14 = Fan 1 (e. g. for the processor)
15 = Power supply monitoring
16 = Intrusion detection
The components and connectors marked do not have to be present on the system board.

Mechanics
A26361-D1171-Z180-4-7619 English - 5
Connectors
!Some of the following connectors are optional!
Serial chipcard reader or internal
serial port 2 (COM 2)
external via optional cable 1
2
Pin Signal Pin Signal
1 DCD 2 2 DSR 2
3 SIN 2 4 RTS 2
5 SOUT 2 6 CTS 2
7 DTR 2 8 PC_On_Strobe
9 GND 10 VCC Auxiliary
11 Not connected 12 VCC
13 RESET (high asserted) 14 GND
15 GND 16 Key

Mechanics
6 - English A26361-D1171-Z180-4-7619
Front panel connector
1) Cable is not included in the delivery scope.
2) The same interface
3) 2pin or 3pin connector possible
1
2
HD-LED1)
Power On/Off
SCSI LED Input 2)1)
Message LED1)
Speaker2)
1)
Sleep
Reset1) Power On LED1)3)
Pin Signal Pin Signal
1 Not connected 2 Speaker
3 Standby LED (Anode) 4 Key
5 Key 6 GND
7 PON_LED (Anode) 81) VCC or GND
9 PON_LED (Anode) 10 Key pin
11 PON_LED (Cathode/GND)
Standby LED (Cathode/GND) 12 Key pin
13 Message LED (Anode) 14 Key
15 Message LED (Cathode) 16 Not connected
17 Key 18 SCSI LED input (low asserted)
19 HD_LED (Anode) 20 SCSI LED input (low asserted)
21 HD_LED (Cathode) 22 Not connected
23 GND 24 Key
25 Power button (low asserted) 26 GND
272) Sleep button (low asserted) 28 GND
29 Reset button (low asserted) 30 GND
1) Pin 8 is connected to VCC if audio is not onboard.
Pin 8 is connected to GND if audio is onboard.
2) The sleep button (optional) functions only for operating systems with APM (not with ACPI).

Mechanics
A26361-D1171-Z180-4-7619 English - 7
USB chipcard reader 12
Pin Signal Pin Signal
1 P3V3P_DUAL 2 VCC
3 Data negative up 4 Data positive up
5 Data negative down 6 Data positive down
7 GND 8 GND
9 Not connected 10 VCC auxiliary
11 P3V3P 12 Power OK (high asserted)
13 Chipcard reader On (low pulse) 14 Key
Fan 2 connector 1
Pin Signal
1 GND
2 +12 V
3 Fan sense
Wake On LAN (WOL) connector 1
Pin Signal
1 VCC Auxiliary
2 GND
3 Wake pulse (high asserted)

Mechanics
8 - English A26361-D1171-Z180-4-7619
CD-ROM audio connector (internal)
1
Pin Signal
1 Left CD audio input
2 CD GND
3 CD GND
4 Right CD audio input
Auxiliary (MPEG, TV) audio
connector (internal)
1
Pin Signal
1 Left AUX audio input
2 Analog GND
3 Analog GND
4 Right AUX audio input

Mechanics
A26361-D1171-Z180-4-7619 English - 9
Fan 1 connector 1
Pin Signal
1 GND
2 Controlled fan voltage (0 V / 6...12 V)
3 Fan sense
Power supply monitoring 1
Pin Signal
1 Monitor on
2 PS FAN off request (low asserted)
3 PS FAN full on (low asserted)
4 PS FAN pulse
5 SMB CLK
6 SMB DATA
7 VCC EEPROM
8 GND
Intrusion connector for case open
detect for optional push-button
(opener)
1
Pin Signal
1 GND
2 Case open (low asserted)
3 Intrusion switch present (low asserted)

Mechanics
10 - English A26361-D1171-Z180-4-7619
Configuration
Functions controlled by the switch block
Function SKP RCV FWP RES*
Password skip on X X off
Off off X X off
Recovery BIOS X on X off
Off X off X off
Floppy write protect X X on off
Off X X off off
*) Must be in "off" state.
USB power
USB power jumper 1
Pin Signal
1 VCC
2 USB power connection
3 VCC_AUX
Jumper 2-3 Default setting:
If the power supply supports auxiliary voltage the USB interface is
permanently powered except when the main supply is plugged off.
Wakeup from ACPI S1-S4 state possible.
Jumper 1-2 The USB interface is only powered in operating state.
Wakeup from ACPI S1 state possible.

Documentation
A26361-D1171-Z180-4-7619 English - 11
Power
Power requirement
Source Voltage Maximum variation Maximum current Comment
Main power supply +5.0 V ±5 % 15 A
Main power supply +12 V ±10 % 350 mA
Main power supply -12 V ±10 % 150 mA
Main power supply +3.3 V ±5 % 4 A
Auxiliary power supply +5.0 V ±5 % 2 A
Power loadability
Fuse
number Maximum fuse current Function Maximum function current
1 750 A Keyboard port Not specified
Mouse port Not specified
Game port Not specified
VGA connector Minimum 50 mA
2 750 mA Universal serial bus (USB) Port A 500 mA
3 750 mA Universal serial bus (USB) Port B 500 mA
Documentation
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD does not start automatically, run the START.EXE file in the main directory of the CD.
Ê Select your system board or your device.
Ê Select Documentation.
Ê Select - Technical Manuals
Ê Select - Technical Manuals (BIOS)
i
You may have to install the Acrobat Reader - Software on the CD-ROM (path:
utls/acrobat) before reading!
For more details please read the according readme.txt files.
Installing drivers
Ê Insert the "Drivers & Utilities" CD.
Ê If the CD doesn't start automatically call the START.EXE file in the main directory of the CD.
Ê If the system board list is displayed select the system board or select under Driver the
operating system used and the audio and video drivers.

Upgrading main memory
12 - English A26361-D1171-Z180-4-7619
Upgrading main memory
Support: The system needs at least one module and can manage at most two SDRAM
modules.
Size: From 16 Mbytes up to 512 Mbytes SDRAM
Technology: 100 MHz unbuffered DIMM modules.
168 pin, 3.3 V, 64 bit, 100 MHz SDRAM
2M,4M,8M,16Mand32Mx64bit
Granularity: For one socket 16, 32, 64. 128 or 256 Mbyte
SDRAM modules with ECC can be plugged in but ECC is not functioning. Mix of
ECC modules with non ECC modules is possible.
Troubleshooting
Message BIOS update
The System BIOS provides optimum support for the processor you have chosen. If the message
BIOS update for installed CPU failed
appears the microcode required for the processor inserted must still be loaded. Further information
on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided.
The screen stays blank
If your screen stays blank this may have the following cause:
The wrong RAM memory module has been inserted
Ê See the chapter "Main Memory" for information which memory modules can be used.
ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) doesn't work
This system board is fully compliant for ACPI S3 and S4. Therefore it is PC98 certified by Microsoft.
If you have any problems with ACPI please ensure that all of your components are supporting ACPI
S3 and S4.
− Operating system
− Hardware and drivers of controllers (e. g. VGA, audio, LAN, SCSI controllers).
!The system board D1171 supports Save-to-RAM. Therefore the D1171 is certified by Intel
and Microsoft. This support must be also guaranteed by the operating system, the
extension boards and the power supply. For the time neither Windows 98 1st edition nor
Windows NT4.0 support this function reliably. Windows 98 SE and Windows 2000 will
support ACPI S3. Unfortunately only a few extension boards work with functional Save-to-
RAM compliant drivers (refer to http://developer.intel.com/technology/iapc/involve.htm ).