Fujitsu IP-900E Installation manual

IP-900E
IP-900D
IP-900IID
Hardware User’s Guide

(This page is intentionally left blank)

IP-900E/IP-900D/IP-900IID
i
USING IP-900E/IP-900D/IP-900IID series SAFELY
Handling of This Manual
The manual contains important information regarding the safe use of IP-900E/IP-900D/IP-900IID.
Read it thoroughly before operating this device. Make sure that users of this equipment read and
understand thoroughly all safety precautions contained in the manual. Keep this manual in a safe and
convenient location for quick reference.
Fujitsu makes every effort to prevent users and bystanders from injury and to prevent property damage.
To ensure no harm to you and bystanders, and to prevent damage to this equipment itself, be sure to use
this equipment in accordance with instructions in the manual.
The following notice is for USA users only.
IP-900E/IP-900D/IP-900IID
has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro
vide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction ma
nual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
The following notice is for Canada users only.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
The following notice is for EU (European Union) users only.
This is Class A product of Electromagnetic Interference (EMI) standard. In a domestic environment
this product may cause radio interference in which case the user may be required to make adequate
measures.
This manual includes technology controlled under the Foreign Exchange and Foreign Trade Control
Law of Japan. The manual or a portion thereof must not be exported (or re-
exported) without
authorization from the appropriate governmental authorities in accordance with the above law.
IP-900E/IP-900D/IP-900IID is designed and manufactured for use in standard applications such as
office work, personal devices, and household appliances. The product is not intended for special uses
(such as nuclear-
reactor control in atomic energy facilities, aeronautic and space systems, air traffic
control, oper
ation control in mass transit systems, medical devices for life support, and missile firing
controls in weapons facilities) where particularly high reliability requirements exist, where the pertinent
levels of safety are not guaranteed, or where a failure
or operational error could threaten a life or cause
physical injury (hereafter referred to as "mission-
critical" use). Customers considering use of this
product for mission-critical applications must have safety-
assurance measures in place beforehand.
Mo
reover, they are requested to consult our sales representative before embarking on such specialized
use.

IP-900E/IP-900D/IP-900IID
ii
Copying of and disassembly, decompilation and other forms of reverse engineering of any program
included with this device is prohibited.
Window
s, Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
HDMI, HDMI Logo and High-
Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
IMPORTANT NOTE TO USERS
READ THE ENTIRE MANUAL CAREFULLY BEFORE USING THIS PRODUCT.
INCORRECT USE OF THE PRODUCT MAY RESULT IN INJURY OR DAMAGE TO
USERS, BYSTANDERS OR PROPERTY.
While FUJITSU has sought to ensure the accuracy of all information in this manual, FUJITSU
assumes no liability to any party for any damage caused by any error or omission
contained in this
manual, its updates or supplements, whether such errors or omissions result from negligence, accident,
or any other cause. In addition, FUJITSU assumes no liability with respect to the application or use of
any product or system in accordance with descriptions or instructions
contained herein; including any
liability for incidental or consequential damages arising therefrom.
FUJITSU DISCLAIMS ALL WARRANTIES REGARDING THE INFORMATION
CONTAINED HEREIN, WHETHER EXPRESSED, IMPLIED, OR STATUTORY.
FUJITSU reserves the right to make changes to any products described herein without further notice
and without obligation.
No part of this manual shall be reproduced in any way or form without the permission of Fujitsu Limited.
All Rights Reserved. Copyright ©FUJITSU LIMITED 2008-2016

IP-900E/IP-900D/IP-900IID
iii
PREFACE
Thank you for purchasing the IP-900E/IP-900D/IP-900IID.
IP-900E/IP-900D/IP-900IID are the video transmission unit with the H.264 encoding technology which
performs the high compression ratio, and transmits the SD (Standard Definition) /HD (High Definition) video
and audio signals in real time through even the optical IP network like FTTH. (*1) IP-900E has functions that
encodes SD/HD video signals from a SD/HD camera or similar device and distributes it across the network in
real-time. IP-900D/IP-900IID has functions that decode the encoded SD/HD video signal data received via the
network and displays it on a monitor or other device.
This manual is intended for system designers and system managers who use IP-900E/IP-900D. Readers
are assumed to have a basic knowledge of networks and video distribution.
Figures and tables are described by using IP-900E as a sample. Functions which are not supported by
IP-900D/IP-900IID are described at each part of functions separately.
*1: IP-900E supports only SD video. By adding optional software, IP-900E will be upgraded to support HD
video.
Product operating environment
•Designed for use in real-time audio/video transmission systems and in the transmission system of
monitoring systems, IP-900E/IP-900D/IP-900IID is intended for indoor use.
Note:
The contents of this manual are subject to change without notice.
Edition 9
June 2016

IP-900E/IP-900D/IP-900IID
iv
ORGANIZATION AND CONTENTS OF THIS MANUAL
The manual consists of five chapters, an appendix, a glossary and an index.
Read Chapters 1 and 2 first for information on installing and connecting this equipment. Read Chapter
3 for operating instructions, and Chapter 4 and subsequent chapters can be read as required.
Chapter 1 Preparations
This chapter describes the checks that are required before the start of IP-900E/IP-900D/IP-900IID
operation.
Chapter 2 Installation and Connection
This chapter describes conditions for IP-900E/IP-900D/IP-900IID installation and explains how to
connect it to peripheral this equipments.
Chapter 3 Operating Instructions
This chapter explains how to power on/off, set up and operate this equipment.
Chapter 4 Connection Cable Specifications
This chapter contains a classification of how work is implemented, cable connection system diagrams
and cable connector details.
Chapter 5 Troubleshooting
This chapter describes actions to be taken if this equipment does not operate normally or if an alarm LED
turns on.
Appendix
The appendix contains views of this equipment and its basic specifications. Installation work and
on-site adjustment preparations are also covered in this section.
Glossary
The glossary defines the technical terms used in this manual.
Index
The index lists keywords and corresponding pages on which the words appear, so necessary items can be
looked up immediately.

IP-900E/IP-900D/IP-900IID
v
WARNING INDICATIONS
This manual uses warning indications to warn of conditions in order to prevent serious injury and
property damage. Warning indications consist of warning markings of specific levels and warning
messages. The warning markings are shown below along with their definitions.
WARNING indicates a situation that could lead to serious injury
or loss of life if procedures are not followed correctly.
CAUTION indicates a situation that could lead to minor or
moderate injury and/or damage to this equipment itself if
procedures are not followed correctly.
Warning indications within text
Warning markings are followed by warning messages. Every warning marking is centered on a line.
Left and right indents are set for warning messages to differentiate them from ordinary text.
Furthermore, the lines immediately before and after warning indications are left blank.
(Example)
Possibility of electric shock, fire and damage to this equipment
Always observe the precautions given below.
This indicates a hazardous situation that could lead to electric shock, fire or
damage to this equipment.
•Always connect the power cord to a power receptacle for a standard
two-prong plug with ground.
•Connect this equipment to the power receptacle with a capacity of 1A
or more. When using a power extension cable, be sure that the total
power consumption of all devices connected to the cable does not
exceed the rated capacity of the cable. If a power receptacle with a
low capacity or capacity below the rated value is used, the power
receptacle, extension cable or power distribution wiring may overheat
and start a fire.
Important warning indications are summarized below in “Safety Precautions.”
!
!
CAUTION

IP-900E/IP-900D/IP-900IID
vi
SAFETY PRECAUTIONS
List of important warnings
The table below contains a list of important warning indications.
Work type Warning
Normal use
Possibility of electric shock and fire
If an excessive heat, smoke, an abnormal odor or an unusual noise is coming from
this
equipment
, immediately set its power switch to OFF and remove the power cord plug
from the power receptacle. Then, contact a Fujitsu Service Center.
This indicates a hazardous situation that could lead to fire and electric shock.
Possibility of electric shock and fire
If foreign matter (e.g., water, bits of metal, fluid) gets inside this equipment
, immediately
set its power switch to O
FF and remove the power cord plug from the power receptacle.
Then, contact a Fujitsu Service Center.
This indicates a hazardous situation that could lead to fire and electric shock.
Possibility of electric shock and fire
If this equipment has been droppe
d or otherwise damaged, immediately set its power
switch to OFF and remove the power cord plug from the power receptacle. Then,
contact a Fujitsu Service Center.
This indicates a hazardous situation that could lead to electric shock.
Possibility of electric shock and fire
To keep foreign matter out, ensure that drink containers and metal objects are not placed
on or near this equipment.
The presence of foreign matter such as water inside this equipment
creates a hazardous
situation that could lead to electric shock.
Possibility of electric shock and fire
Ensure that no liquid is splashed on this equipment, making it wet.
The presence of foreign matter such as water inside this equipment
creates a hazardous
situation that could lead to fire and electric shock.
Possibility of electric shock and fire
Ensure that the power cord does not become damaged, and avoid tampering with it.
If the power cord has a heavy object is placed on it, pulled at, bent, or becomes entangled, it
could be damaged as a result.
Also, the power cord could be damaged if subjected to heat,
creating a hazardous situation that could lead to fire and electric shock.
Possibility of electric shock
Because this device contains a hazardous voltage section, never open the cover.
Only a service engineer must open the cover.
This warning indicates a hazardous situation that could lead to electric shock.
Indicates a situation that could lead to serious injury or loss of life if procedures
are not followed correctly.

IP-900E/IP-900D/IP-900IID
vii
Work type Warning
Installation
Possibility of electric shock and fire
Do not install this equipment in the following places because using it there
may cause a
fire or electric shock:
•Extremely dusty or dirty place
•Wet or humid location
•Hot location, such as a place where this equipment
is exposed to direct sunlight or
is near heating equipment
•Near products (e.g., speakers) that generate a strong magnetic field
•Location where the temperature is too hot or cold
•In an environment with sharp temperature fluctuations
•Area with poor ventilation
•Near a fire
Possibility of electric shock, fire, and damage to this equipment
Always observe the precautions given below.
This indicates a hazardous situation that could lead to electric shock, fire and damage
to
this equipment.
•Always connect the power plug to a power receptacle for a standard two-
prong plug
with ground.
•Connect this equipment to a pow
er receptacle with a capacity of 1 A or more.
When using a power extension cable, be sure that the total current consumption of
all devices connected to the cable does not exceed the rated capacity of the cable.
If a power receptacle with a low capacit
y or capacity below the rated value is used,
the power receptacle, extension cable or power wiring may overheat and start a fire.

IP-900E/IP-900D/IP-900IID
viii
Work type Warning
Installation
and
relocation
Possibility of serious injury and damage to this equipment
Do not install this equipment
in places where it is exposed to shock and strong vibrations,
on an incline or in unstable locations.
This indicates a hazardous situation that could lead to serious injury or damage to this
equipment.
Possibility of serious injury and damage to this equipment
When relocating this equipment
, observe the following precautions to protect against
serious injury and damage to this equipment:
•
Set the power switch to OFF, and disconnect all connected cables. Take care to
avoid getting your feet entangled in the cables.
•To prevent serious personal injury when moving this equipment
, take special care
to pay attention to your surroundings.
Clean
Possibility of fire, serious injury and damage to this equipment
When cleaning this equipment, observe the following precautions to protect against
fire,
serious injury and damage to this equipment:
•When cleaning this equipment, please do not use cleaning spray that is including
combustible material. Also, please do not use it around this equipment.
•When cleaning this equipment
, please wipe off with the cloth squeezing water (or
neutral detergent thinned by water).
•When wiping off, please be careful not to put water into this equipment from
switches or the spaces.

IP-900E/IP-900D/IP-900IID
ix
LABEL
The warning label shown below is affixed to this equipment.
・Never remove the label.
・Be sure to check the label at the bottom of this device before coming to the power supply.
・The following label is intended for users of this equipments.
Mark for rubber feet
Label：IP-900E
LISTED
R
CUS
1K91
I T E
E136004
Manufacture
Fujitsu Limited
Address: 1-1, Kamikodanaka 4-Chome, Nakahara-Ku, Kawasaki 211-8588, Japan
Authorised representative
Fujitsu Services Limited
Address: 22 Baker Street, London, W1U 3BW, United Kingdom
CAN ICES-3 (A) / NMB-3 (A)
MODEL
PART NO.
IP-900E
TA23742-B5XX
This device complies with Part 15 of the FCC Rules.
operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
MADE IN JAPAN
0.38A-0.20A
1φ
100V-240V～
50/60Hz
2.3kg
FUJITSU LIMITED
0.038kVA-0.048kVA
T認証番号
01A
08-10
00001
D08-0454001
12345
XXXXXXX-XXXXXX
KTL.
FKL-IP-900(A)
인증번호 :
인증받은 사람의 상호
Fujitsu Korea Limited
:
Support service center
Tel :
[phone]
Label：IP-900D
LISTED
R
CUS
1K91
I T E
E136004
Manufacture
Fujitsu Limited
Address: 1-1, Kamikodanaka 4-Chome, Nakahara-Ku, Kawasaki 211-8588, Japan
Authorised representative
Fujitsu Services Limited
Address: 22 Baker Street, London, W1U 3BW, United Kingdom
CAN ICES-3 (A) / NMB-3 (A)
MODEL
PART NO.
IP-900D
TA23742-B6XX
This device complies with Part 15 of the FCC Rules.
operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
MADE IN JAPAN
0.33A-0.17A
1φ
100V-240V～
50/60Hz
2.3kg
FUJITSU LIMITED
0.033kVA-0.041kVA
T
認証番号
01A
08-10
00001
D08-0454001
12345
XXXXXXX-XXXXXX
KTL.
FKL-IP-900(A)
인증번호
:
인증받은 사람의 상호
Fujitsu Korea Limited
:
Support service center
Tel :
[phone]
Label：IP-900IID
MODEL
PART NO.
IP-900IID
TA23742-B6XX
This device complies with Part 15 of the FCC Rules.
operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
MADE IN JAPAN
0.35A-0.18A
1φ
100V-240V～
50/60Hz
2.3kg
FUJITSU LIMITED
0.035kVA-0.045kVA
T
認証番号
01A
10-08
00001
D08-0454001
12345
LISTED
R
CUS
1K91
I T E
E136004
Manufacture
Fujitsu Limited
Address: 1-1, Kamikodanaka 4-Chome, Nakahara-Ku, Kawasaki 211-8588, Japan
Authorised representative
Fujitsu Services Limited
Address: 22 Baker Street, London, W1U 3BW, United Kingdom
CAN ICES-3 (A) / NMB-3 (A)
XXXXXXX-XXXXXX
KTL.
FKL-IP-900(A)
인증번호
:
인증받은 사람의 상호
Fujitsu Korea Limited
:
Support service center
Tel :
[phone]
LISTED
R
CUS
1K91
I T E
E136004
Manufacture Fuj itsu Limited
Addres s: 1-1, Kamikodanaka 4-Chome, Nakahara-Ku, Kawasaki 211-8588, Japan
Authorised representati ve
Fuj itsu Services Limited Addres s: 22 Baker Street, London, W1U 3BW, United Kingdom
CAN ICES-3 (A) / NMB-3 (A)
MODEL
PART NO.
IP-900E
TA23742-B5XX
This device complies with Part 15 of the FCC Rules.
operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
MADE IN JAPAN
0.38A-0.20A
1φ
100V-240V～
50/60Hz
2.3kg
FUJITSU LIMITED
0.038kVA-0.048kVA
T認証番号
01A
08-10
00001
D08-0454001
12345
XXXXXXX-XXXXXX
KTL.
FKL-IP-900(A)
인증번호
:
인증받은 사람의 상호
Fujitsu Korea Limited
:
Support service center Tel
:
[phone]

IP-900E/IP-900D/IP-900IID
x
PRODUCT HANDLING PRECAUTIONS
Maintenance
Do not try to repair this equipment yourself. Contact a Fujitsu Service
Center.
Read this manual thoroughly before attempting to operate this equipment.
If you have any questions, contact a Fujitsu Service Center.
If a problem occurs, contact a Fujitsu Service Center.
The Fujitsu Service Center will ask you to describe the problem, the lamp display status of
alarm LEDs and other details. Check the system for this information.
Connectable devices
Only devices that conform to this equipment interface specifications (Refer to Appendix 2.3,
"Device Specifications") can be connected. Otherwise, if incompatible devices are connected, the
result may be personal injury and property damage.
CF card consideration
Please note that you need to remove the CF card or take the backup of its recorded data in case of
requesting the repair of the main unit that the CF card is installed, since Fujitsu does not guarantee
the recorded content during the repair work.
Please also note that the recorded content might be deleted by the process of the diagnostic and
the repair work after Fujitsu starts the work even if you already cancel the repair request
Disposal
To dispose of this equipment, contact a Fujitsu Service Center, or request a specialist to take care
its disposal.
Modification and restoration
Do not use any device that has been modified or rebuilt with refurbished used parts. Otherwise,
you may result in personal injury and property damage.
WARNING
CAUTION

IP-900E/IP-900D/IP-900IID
I
CONTENTS
Chapter 1 Preparations.......................................................................... 1
1.1 Main Features.........................................................................................3
1.2 Components ...........................................................................................4
1.3 Basic Application Examples ...................................................................5
1.4 Part Names.............................................................................................6
Chapter 2 Installation and Connection............................................... 11
2.1 Installation Conditions ..........................................................................13
2.1.1 Environment conditions ...........................................................13
2.1.2 Installation environment...........................................................13
2.1.3 Air flow into and out from this equipment ................................33
2.1.4 Open space required around this equipment ..........................34
2.2Power Supply System Connections ..................................................35
2.2.1 Connection to ground ..............................................................35
2.2.2 Connection to power source....................................................36
2.3 Audio and Video Device Connections ...............................................39
2.3.1 IP-900E (Encoder) ...................................................................39
2.3.2 IP-900D/IP-900IID (Decoder) ..................................................40
2.4 Connection to Network .........................................................................41
2.5 Connection to RS-232C Device.........................................................42
2.6 CF Card Insertion and Removal...........................................................43
Chapter 3 Operation Instructions ....................................................... 45
3.1 Power ON/OFF.....................................................................................46
3.1.1 Powering on...............................................................................46
3.1.2 Powering off...............................................................................46
3.2 Device Settings and Operation ............................................................47
3.2.1 Reboot .......................................................................................48
3.3 Special Use of MNT Button ..................................................................49
Chapter 4 Cable Specifications........................................................... 51
4.1 Installation Preparations.......................................................................53
4.2 Cable and Connector Details ...............................................................55
Chapter 5 Troubleshooting.................................................................. 63
5.1 Help Information ...................................................................................65
5.2 Alarm LED Lamp Is On ........................................................................72
5.3 Maintenance .........................................................................................74
5.3.1 Maintenance space ...................................................................74
5.3.2 Change of maintenance parts (Maintenancer only) ..................75

IP-900E/IP-900D/IP-900IID
II
Appendix..................................................................................................77
A.1 Appearance ..........................................................................................79
A.2 Basic Specifications..............................................................................81
A.2.1 External specifications............................................................... 81
A.2.2 Environment specifications........................................................ 81
A.2.3 Function specifications .............................................................. 82
A.3 Preparations for Installation Work ........................................................ 88
A.3.1 Scope of installation work.......................................................... 88
A.3.2 Unpacking and device check..................................................... 88
A.3.3 Installation conditions ................................................................ 88
A.3.4 Connecting external cables....................................................... 88
A.4 Preparations for On-site Turn-up....................................................... 89
Glossary and Index .................................................................................93
Glossary.........................................................................................................95
Index98
CE Conformity Information ..........................................................................100

Chapter 1 Preparations
This chapter describes the checks that are required before the start of
IP-900E/IP-900D/IP-900IID operation.
1.1 Main Features ································································3
1.2 Components ··································································4
1.3 Basic Application Examples···············································5
1.4 Part Names····································································6
CHAPTER 1
PREPARATIONS

(This page is intentionally left blank)

Chapter 1 Preparations
IP-900E/IP-900D/IP-900IID
3
1.1 Main Features
IP-900E/IP-900D/IP-900IID are the video transmission unit with the H.264 encoding technology
which performs the high compression ratio, and transmits the SD (Standard Definition) /HD (High
Definition) video and audio signals in real time through even the optical IP network like FTTH.
IP-900E has functions that encodes SD/HD video signals from a SD/HD camera or similar device and
distributes it across the network in real-time. IP-900D/IP-900IID has functions that decode the encoded
SD/HD video signal data received via the network and displays it on a monitor or other device.
Main Features
IP-900E IP-900D IP-900ⅡD
Item Specifications
Video input
HD-SDI / SD-SDI 1ch [BNC]
x
*1
－ －
HDMI 1.2a (*4) 1ch [HDMI]
x
*1
－ －
Analog Composite
1ch
[BNC]NTSC/PAL
X －
－
Video output(*2)
HD-SDI / SD-SDI
1ch
[BNC]
－
－ X
HDMI 1.2a (*4)
1ch
[HDMI]
－
X X
Analog Composite(*3) 1ch [BNC] NTSC/PAL －
X X
Audio input
HD/SD-SDI embedded
2ch
[BNC], 1 stereo pairs
X －
－
HDMI 1.2a (*4)
2ch
[HDMI]
X －
－
Analog unbalanced
2ch
[RCA], 1 stereo pair
X －
－
Audio output(*2)
HD/SD-SDI embedded
2ch
[BNC], 1 stereo pairs
－ －
X
HDMI 1.2a (*4)
2ch
[HDMI]
－
X X
Analog unbalanced
2ch
[RCA], 1 stereo pair
－
X X
Network LAN 1ch
[RJ45],
10BASE-T / 100BASE-TX
X X X
Data input/output
RS-232C
1ch
[D-sub9-pin], male connector
X X X
CF CARD slot
CF CARD
1
Data storage application
X －
－
Installation conditions
Indoor: On a desk, mounted in a rack
X
Dimensions
W: 210 H: 42 D: 300 (mm) Note: Excluding protrusions (i.e., not including feet)
X
Cooling system
Forced air cooling
X
Power supply
100-240VAC
X
Weight
Maximum 2.3kg
X
Power consumption
38VA or less @ 100VAC
X
Temperature
Humidity
-10 to 55°C (No low temperature startup: -10 to -1°C)
20 to 90%RH (No condensing)
X
*1: IP-900E supports only SD video. By adding optional software, IP-900E will be upgraded to support HD video.
*2: IP-900D/900IID(Decoder) can output decoded video/audio signals from all video/audio output interfaces.
*3: In case of HD video transmission, IP-900D/900IID cannot output video signal from “Analog composite” video interface.
*4: DVI isn't supported.
1.1

Chapter 1 Preparations
IP-900E/IP-900D/IP-900IID
4
1.2 Components
The IP-900E/IP-900D/IP-900IID product package consists of the following components.
Attachments for all series consist of same contents.
･IP-900E/IP-900D/IP-900IID: 1 pc (cables separate order)
･
Safety manual: 1pc
･
User’s Guide: 1pc
･
Holder of power supply cable: 1 pc
・
Feet: 4 pcs
CF CARD
/ACT
RDY
PWR ALM
IN
DWN
OPT
100M
LINK
E
1.2

Chapter 1 Preparations
IP-900E/IP-900D/IP-900IID
5
1.3 Basic Application Examples
Examples (system configuration) of use of IP-900E/IP-900D/IP-900IID are shown below.
1.3
IP Network
FTTB / FTTH
Dart Fiber
AP
AP
HD VTR
HD Camera
AP
Encoder Site
Live Coverage
ＩＰ-900E
Monitoring
Control
HD Archive Server
Strage(NR)
AP
Dual Encoding (SD)
File Transfer by Flow Control
HD VTR
Video Editing
Equipment
On demand file transfer
From affiliates
Decoder Site
1U サーバー
Live Coverage
ＩＰ-900E
ＩＰ-900D
ＩＰ-900E
HD Camera
RDY
PWR ALM
IN
DWN
OPT
MNT
FG
/ACT
100M
LINK
10/100BASE RS-232C
ANALOGAUDIO IN
ANALOG
VIDEOIN
SDI
E
LR
100-240V
RDY
PWR ALM
IN
DWN
OPT
MNT
FG
/ACT
100M
LINK
10/100BASE RS-232C
ANALOGAUDIO IN
ANALOG
VIDEOIN
SDI
E
L R
100-240V
RDY
PWR ALM
IN
DWN
OPT
MNT
FG
/ACT
100M
LINK
10/100BASE RS-232C
ANALOGAUDIO IN
ANALOG
VIDEOIN
SDI
E
L R
100-240V
RDY
PWR ALM
IN
DWN
OPT
MNT
FG
/ACT
100M
LINK
10/100BASE RS-232C
ANALOGAUDIO IN
ANALOG
VIDEOIN
SDI
E
L R
100-240V

Chapter 1 Preparations
IP-900E/IP-900D/IP-900IID
6
RDY
PWR ALM
IN
DWN
OPT
MNT
FG
/ACT
100M
LINK
10/100BASE RS-232C
ANALOG AUDIO I N
ANALOG
VIDEO IN
SDI
EL R
100-240V
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)
(13) (14) (15) (16) (17)
1.4 Part Names
This section gives the name and describes the function of individual parts of
IP-900E/IP-900D/IP-900IID.
The diagrams below show the layout of parts on the outside of this equipment, and the table below
lists the name and describes the function of individual parts.
- IP-900E
Figure Front panel
Figure Rear panel
Part names
No. Name Description
(1)
Power inlet connector
(INPUT 100-240VAC)
Can be connected to a 100-240VAC commercial power supply by using power
card with a standard two-prong plug with ground.
See Section 2.2.2, “Connection to a Power Source,” for an explanation on using
this connector. See Section 4.2, “Cable and Connector Details,” for cable
connection information.
(2)
Power button
Turns this equipment on and off.
(3)
Power LED (PWR)
Turns on when this equipment is powered on.
(4)
Status LED
(RDY)
Turn on when IP-900E power is on. For more information, see Table 5.3,
“
Details of LED Indications,
”
in Section 5.2.
(5)
Alarm LED
(ALM)
Turns on when IP-900E operation is abnormal. For more information, see
Table 5.3, “Details of LED Indications,” in Section 5.2.
(6)
AV input status LED
(INDWN)
Audio/Video input setting status indicator and LED that indicates the input off
status during input setting. For more information, see Table 5.3, “Details of
LED Indications,
”
in Section 5.2.
(7)
Option LED
(OPT)
Turn on when option license is installed. For more information, see Software
guide.
(8)
LAN port
(10/100BASE)
Ethernet 10BASE-T/100BASE-TX communication port. See Section 2.4,
“Connection to a Network,” for an explanation on using this port. See Section
4.2, “Cable and Connector Details,” for cable connection information.
(9)
Speed LED
(100M)
Indicates the status of LAN port. For more information, see Table 5.3, “Details
of LED Indications,” in Section 5.2.
(10)
Status LED
(LINK/ACT)
Indicates the speed of LAN port. For more information, see Table 5.3, “Details
of LED Indications,” in Section 5.2.
E
/ACT
RDY
PWR ALM
IN
DWN
OPT
100M
LINK
11
CF CARD
AUX
(18)
(19) (20)
(3) (4) (5) (6) (7) (9)
(10)
1.4