Fujitsu FTP-632MCL301 User manual

NOT FOR NEW
DESIGN
FTP-632MCL301/302
■OVERVIEW
FTP-632MCL/FTP-622DCL/DSL Series is an ultra high speed
line thermal printer driven by 24 VDC, printing on 3-inch wide
paper (80 mm/85 mm).
This printer is compact and light weight, and the design allows
easy head maintenance, head cleaning and head replacement.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon machines, label printers,
medical instruments, etc. A printer with a specially designed
cutter is also available.
■HIGHLIGHTS
• Ultra high speed printing
It can print at 80 mm/s (640 dotlines/s) maximum by using
Fujitsu Components' unique head drive control.
• Compact and lightweight
This printer has a low profile of only 20 mm, and a light
weight of approximately 94 g.
• Low power consumption
The peak current for head driving is approximately 2.9 A (at
80 mm/s printing speed, 50% printing ratio).
• Easy head access
It is designed for easy head cleaning and head replacement.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• ESC/POSTM*1 Commands
The commands conform to ESC/POSTM.
• Auto Cutter
Printer with auto cutter (full cut/partial cut) is also available.
• UL Recognized
File No.E171434
*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
3” MECHANISM, WITH CUTTER
FTP-632MCL301
FTP-622DCL011
FTP-622CU101

2
FTP-632MCL301/302
NOT FOR NEW
DESIGN
Part number FTP-632MCL301/302
Printing method Thermal-sensitive line dot method
Dot structure 576 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 72 mm
MCL301 80 mm
Paper width MCL302 85 mm
Paper thickness 60~100 µm*1
Cutting type full or partial
Number of columns 48 columns/line (24×12 dot font)
Maximum printing speed 640 dotlines/s (80 mm/s)
Alphanumeric KANA: 159 International characters: 195
Character types JIS KANJI (FTP-622DCL101/111): approximately 6800
24 ×12 dots, (3.0 ×1.5 mm), 48 columns
24 ×24 dots, (3.0 ×3.0 mm), 24 columns
16 ×8 dots, (2.0 ×1.0 mm), 72 columns
16 ×16 dots, (2.0 ×2.0 mm), 36 columns
■DESIGNATION
Part number
With Auto cutter FTP-632MCL301/302*1
FTP-622DCL011/111*2
FTP-622DSL011/012*3
FTP-622CU101*4
Item
Printer mechanism
Interface board
■GENERAL SPECIFICATIONS
SpecificationsItem
Character composition, dimensions (H×W),
Number of characters
(Continued)
Centronics Standard with Auto cutter
Serial (RS-232C)
LSI(MCU)
*1: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path) and 302 is for rear
paper insertion (straight path).
*2: 011 supports ANK and 101 supports ANK + Kanji.
*3: 012 supports ANK and 111 supports ANK + Kanji, + FLASH memory.
*4: CU101 supports Kanji and cutter control.

3
FTP-632MCL301/302
NOT FOR NEW
DESIGN
Power supply
Dimensions
Part number FTP-632MCL301/302
Interface Centronics (ESC/POSTM), RS232C
24 VDC ±5%, Voltage
Current : average*2( ): Peak
For head 1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio)
0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio)
0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio)
For motor 24 VDC ±5%, 1.0 A maximum
For cutter 24VDC ±5%, 1.0 A maximum
For logic 5 VDC ±5%, 0.5 A maximum
Mechanism (cutter) 123 (W) ×70 (D) ×42 (H) mm (w/cutter)
Interface board 131 (W) ×89 (D) ×24 (H) mm
Weight (Mechanism+Cutter) approximately 380 g (w/cutter)
Mechanism Pulse durability : 1 ×108pulse/dot (using Fujitsu's standard
driving method)
Expected life Wear resistance : 50 km (at 25% printing ratio)
Cutter 3 ×105cuts
Operating temperature 0 to +50°C*3
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter
Head-up By microswitch
For front insertion use (80 mm width) : FTP-030PU001, FTP-030P0701
For rear insertion use (85 mm width) : FTP-030P0020, FTP-030P0702
*Recommended papers
· Oji Paper : PD150R, PD160R, PD170R
· NIPPON Paper : TF50KS-E,TF60KS-E,TF60KJ-R
· MITSUBISHI Paper Mills : P220VBB-1, AFP-235
SpecificationsItem
(Continued)
Environmental
conditions
Recommended thermal sensitive paper
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance.
*3: Guarantee: +5°C ~+40°C.

4
FTP-632MCL301/302
NOT FOR NEW
DESIGN
Unit: mm
Mechanism with cutter
300
±15
2—M 3 burring (FIXING HOLE FROM BOTTOM SIDE)
42 67.7
±1
(70.8)
14.2
3—M 3(FIXING HOLE FROM UPPER SIDE)
(60.5)
38.5
13.3
3–2.0 or less
57
±1
235
±15
(78.6)
MCL301
MCL302
63.4
76.8(POSITIONING H0LE)
117.5
Note: all dimensions are nominal value.
58.2
(2 or less)
2 or less

5
FTP-632MCL301/302
NOT FOR NEW
DESIGN
■INTERFACE, COMMAND, OPTIONS
Interface board
Unit: mm
■FUNCTION
ITEM ITEM
1. Test printing 8. Cutter trouble detection
2. Paper-out detection 9. Motor power save
3. Paper near end detection 10. Mark detection
4. Head-up detection 11. MCU trouble detection
5. Abnormal temperature detection of thermal head 12. Power on/off sequence protection
6. Blown fuse detection 13. Motor protection
7. Abnormal voltage detection of head 14. Hardware timer
Please refer to the FTP-622DCL DATA SHEET and the FTP-622DSL DATA SHEET for Interface, Command, and
Options.
88.9 78.7
39.4 39.4
5.1
5.1 5.1
5.1 5.1
5.1
5.1
5.1
120.7
105.4
120.7
116.8
87.6
130.8
43.2 86.4
CN10
CN5CN2** CN3
CN1
CN8
CN13
CN11*
19.1
*CN11 on FTP-622DCL011/111 & 622DSL011/012/112 only
**CN2 on FTP- 622DSL only
4—ø3.6

6
FTP-632MCL301/302
NOT FOR NEW
DESIGN
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 09/2001
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices