Fujitsu fi-4530C Configuration guide

BEFORE CLEANING
Open the ADF while pulling the cover open lever
Consumables Part Number
Pad PA03334-0002
Pick Roller PA03334-0001
Cleaning Materials SC-CLE-KIT1
2
3
4
1Pad Assy
Wipe downwards. When cleaning take care to prevent the cloth from catching on the metal parts.
ADF Glass Surfaces x 2
Located on the ADF cover and opposite side. Clean lightly.
Clean lightly taking care not to scratch the surface.
Pick Roller
Clean lightly while rotating with your finger. Take care not to roughen the surface.
Plastic Rollers x 4
Turn the Scanner OFF while cleaning the following locations
It is recommended that these items be
cleaned EVERY 1,000 SCANS
Using cleaning paper moistened with F1 Cleaner
Cleaning Instructions for
fi-4530C Image Scanner
6
2
3
4
1
5
Pad Assy
Plastic Rollers
Pick Roller
Feed
Rollers
Glass
Eject Rollers
P.T.O.
ADF Button

6
5Feed Rollers x 2
Turn the Scanner ON while cleaning the following locations
Clean lightly taking care not to roughen the surface.
Eject Rollers x 2
Using cleaning paper moistened with F1 Cleaner
For further information please refer to the
fi-4530C Image Scanner Operators Guide
which can be found on our Website:
www.fel.fujitsu.com/scanner
January 2007
Cleaning Instructions for fi-4530C Image ScannerFujitsu Europe LImited
6
2
3
4
1
5
Pad Assy
Plastic Rollers
Pick Roller
Feed
Rollers
Glass
Eject Rollers
Open the ADF only if the Function Number Display is showing “1” through “9”.
Simultaneously hold down the “Send to” and “Scan” buttons on the operator panel.
The Feed and Eject Rollers start to
rotate slowly.
As a guideline, seven presses of the
“Send to” and “Scan” buttons make
the rollers rotate one full turn.
Function Number
Display
Function
Send To
Scan
Power Button
LED
Clean lightly taking care not to roughen the surface.