Fujitsu fi-5650C Configuration guide

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
fi-5650C Image Scanner Operator's Guide P3PC-E957-01EN
All Rights Reserved, Copyright (C) PFU LIMITED 2004
Cleaning and Maintenance

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Chapter 4 DAILY CARE
This chapter describes how to clean the scanner.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
Cleaning and Maintenance

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
4.1 Cleaning material and locations requiring cleaning
1. Cleaning material
Cleaning material Part No. Remarks
Cleaning paper CA99501-0012 Used with Cleaner F1
Cleaner F1
(or isopropyl alcohol) CA99501-0013 1 bottle Moisten cloth with this fluid and wipe the scanner clean.
Cleaner F2 CA99501-0014 1 bottle ( 70 ml)
For cleaning the plastic rollers only.
Cotton swab Commercially available one.
Cloth
CAUTION
Do not clean rubber rollers with Cleaner F2.
1 | 2
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
4.1 Cleaning material and locations requiring cleaning (Continued from the previous page)
2. Locations requiring cleaning
Part Names of parts Using cleaning paper with Cleaner F1 Using Cloth with Cleaner F1 Using Cotton swab with Cleaner F2
per 10,000 scans per 10,000 scans When stains are persistent
ADF Chute roller Yes
Pick arm Yes
Pick roller Yes Yes
Brake roller Yes Yes
Feed roller Yes Yes
Plastic roller Yes Yes Yes
Sheet guide Yes
Glass Yes
Ultrasonic sensor Clean this part with a dry lint-free
cloth.
You have to clean the scanner frequently as following cases :
mScan a smooth surface document such as a coated paper.
mScan a printed document almost fill in the paper.
mScan a processed with chemicals document such as carbonless paper.
mScan a document having a high calcium content.
mScan a lot of penciled document.
CAUTION
Do not clean rubber rollers with Cleaner F2.
1| 2
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
4.2 Cleaning the ADF
4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1
Cleaning the Brake roller, Glasses, Sheet guides, Plastic rollers
1. Open the ADF while pushing the ADF button.
2. Using a cloth moisten with Cleaner F1, clean the Glasses, Sheet guides, Plastic rollers.
3. Open the brake roller holder and remove the brake roller. Using a cloth moisten with the F1Cleaner , clean the brake roller.
4. After cleaning the brake roller, reinstalled it in to the brake roller holder and close the holder.
5. Close the ADF.
CAUTION
Be careful not to pinch your fingers with the ADF cover.
When operating the scanner, the ADF’s inside glass becomes very hot. Please take serious caution as the heat can cause burns.
Before you clean the inside of the scanner, turn off its power and unplug the AC adapter from the outlet and wait (at least three minutes) until
it gets cold.
ATTENTION
Install the Brake roller aligning the flat part of the shaft to the holder.
Confirm that the Brake roller is installed completely. If not, document jams or other feeding errors may occur.
As a guideline, clean the ADF per 10,000 scans.
This value may vary depending on the type of document that you scan. For example, when you scan documents which toner is not
sufficiently fixed, the scanner must be cleaned more frequently.
HINT
For information on the number of pages scanned, see 5.1 Consumable and Replacement Cycle.
1 | 2|3|4
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
4.2 Cleaning the ADF (Continued from the previous page)
4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1
(Continued from the previous page)
Cleaning the Pick roller set
1. Pressing on the ADF button pull slowly towards you the ADF to open and, remove the ADF paper chute from the scanner.
2. Open the pick roller cover. Remove the pick rollers (2 rollers) from the shafts and use a clean cloth with the F1 Cleaner to clean.
3. After cleaning the rollers, re-install them in their proper positions in the shafts.
4. Close the pick roller cover and attach the ADF paper chute.
5. Holding the upper center portion of the ADF, gently close it until the ADF button latches and clicks close.
Cleaning the Feed rollers
1. Open the ADF while pushing the ADF button. If you open the ADF when the indication of the Function No. display is "P" or "0", the
Feed rollers will not rotate even if you try operating the scanner as in step 2 below.
2. Hold a lint-free dry cloth moistened with the Cleaner F1 against the feed rollers.
3. Hold down both the "Send to" and "Scan" buttons on the operator panel. The Feed rollers start rotate a little. For details on locations of
the "Send to" and "Scan" buttons, refer to "1.2 Functions of the operator panel".
4. Perform 7 times the step 3 (the Feed rollers will rotate one full turn). Repeat this cleaning process until the rollers get completely
clean, otherwise any dirt on them can adversely affect the image pick-up performance.
5. Once you have cleaned the Feed Rollers, close the ADF by pushing it gently forward until the ADF button latches and clicks close.
CAUTION
-Be careful not to pinch your fingers with the ADF cover.
-The glass surface inside the ADF becomes hot during the operation of the scanner. Take care not to touch the glass.
1| 2 | 3|4
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
4.2 Cleaning the ADF (Continued from the previous page)
4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1
(Continued from the previous page)
Cleaning the Chute roller
Open the Chute roller cover and clean the Chute roller using a cloth moisten with Cleaner F1.
Cleaning the Pick arm
Open the ADF while pushing the ADF button and clean the rollers located at the tip of Pick arm using a cloth moisten with Cleaner F1.
CAUTION
When closing the ADF, be careful not to pinch your fingers with the ADF cover.
1|2| 3 | 4
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
4.2 Cleaning the ADF (Continued from the previous page)
4.2.2 Cleaning the ADF using Cleaning paper
1. Open the ADF while pushing the ADF button.
2. Apply Cleaner F1 on a new piece of cleaning paper.
3. Place the cleaning paper on the ADF so that its edge contact the plastic rollers.
4. Close the ADF and the cleaning paper is ejected through the ADF.
5. Repeat steps 1 through 4.
ATTENTION
Leave the scanner on during the ADF cleaning.
1|2|3| 4
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Chapter 5 REPLACING CONSUMABLES
This chapter describes how to replace scanner consumables.
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
5.1 Consumable and Replacement Cycle
The following table shows the specifications of consumables and guidelines for the replacement cycle.
Description Parts No. Standard Replacement Cycle
Brake roller PA03338-K010 After 250,000 scans or one year
Pick roller* PA03338-K011 After 250,000 scans or one year
* A set of two rollers.
The replacement cycles above are rough guidelines for the case of using A4/Letter wood free or wood containing paper 64 g/m2(17 lb). This
cycle varies according to the type of the used paper and how frequently the scanner is used and cleaned.
ATTENTION
Use only the specified consumables.
1 | 2|3|4|5
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
5.1 Consumable and Replacement Cycle (Continued from the previous page)
mGuidelines for Consumable Replacement Cycle
With this product, you can learn how many times the consumables are used so that you can estimate the right timing for the replacement.
1. When turning on the power, check that the scanner is connected to your PC.
Refer to "2.2 Connecting the Scanner to a PC" in fi-5650C Getting Started for information about connecting the scanner to your
personal computer.
1| 2 | 3|4|5
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
5.1 Consumable and Replacement Cycle (Continued from the previous page)
2. From [Start] menu, select [All Programs] - [Scanner Utility for Microsoft Windows] and click [Software Operation Panel].
The [FUJITSU Software Operation Panel] window appears.
1|2| 3 | 4|5
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
5.1 Consumable and Replacement Cycle (Continued from the previous page)
3. Click the [Device Setting] tab.
The following panel appears.
You can confirm the following information on this panel:
mTotal number of scans
mBrake Roller counter (approximate number of scans after resetting the Brake Roller counter)
mPick Roller (approximate number of scans after resetting the Pick Roller counter)
mPrint cartridge remaining ink (It will be displayed only when the Imprinter option (sold separately) is installed to the scanner).
1|2|3| 4 | 5
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
5.1 Consumable and Replacement Cycle (Continued from the previous page)
The following message may appear while you use the scanner:
Replace consumables when this message is displayed.
After clicking the [Ignore] button, this message will disappear and scanning will continue. Please replace the consumable as soon as possible.
As a default, this message appears again after 1,000 scans. If you do not wish this message to display, click the [ this message not display
again].
To stop scanning and replace the consumable, click the [Cancel] button.
Replacement information is given in the following:
Brake Roller: see 5.2 Replacing the brake roller
Pick Roller: see 5.3 Replacing the pick roller set
1|2|3|4| 5
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
5.2 Replacing the brake roller
1. Remove all documents from the ADF paper chute.
2. Open the ADF cover by pushing down the ADF button.
3. Open the brake roller holder and remove the brake roller.
4. Remove the brake roller from its shaft.
5. Install a new roller to the shaft aligning the protrusion on the shaft to the slot on the brake roller.
6. Close the brake roller holder.
7. Push the center of the ADF cover to close it until the ADF button is locked.
8. Reset the Brake Roller counter. For details on resetting, refer to "7.6 Resetting the consumable counters".
CAUTION
mBe careful not to pinch your fingers with the ADF cover.
mDo not close the ADF cover when the Brake Roller Holder is opened.
ATTENTION
Confirm that the Brake roller is firmly installed. If not, it may cause feeding errors such as double-feeding.
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
5.3 Replacing the pick roller set
1. Open the ADF while pushing the ADF button.
2. Remove the ADF paper chute from the scanner.
3. Open the pick roller cover. Remove the rollers from the shafts.
4. Install the new pick rollers aligning their grooves to the shafts.
5. Close the pick roller cover.
6. Attach the ADF paper chute.
7. Push in the center of the ADF to close it until the ADF button is locked.
8. Reset the Pick Roller counter. For details on resetting, refer to "7.6 Resetting the consumable counters".
CAUTION
Be careful not to pinch your fingers with the ADF cover. -Do not close the ADF cover when the pick roller cover is opened.
ATTENTION
Confirm that rollers of the pick roller set are firmly installed. If not, they may cause feeding errors such as document jams.
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Chapter 6 TROUBLESHOOTING
This chapter describes how to remedy document jams, other troubles, items to check before contacting the dealer where you bought the
scanner, and how to check the device labels.
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
6.1 Removing jammed documents
CAUTION
-The glass surface inside the ADF becomes hot during the operation. Be careful not to touch the glass surface inside the ADF.
-Be careful not to pinch your fingers with the ADF.
If a document jam occurred because of double-feeding, etc., follow the procedure below to remove the jammed documents.
1. Remove all documents from the ADF paper chute.
2. Open the ADF by pushing the ADF button.
3. Remove the jammed documents.
4. Push in the center of the ADF to close it until the ADF button is locked. Confirm that it is closed completely.
Make sure that the ADF is completely closed. When it is not completely closed, document jams or feeding errors may occur.
ATTENTION
If there is any metal object (paper clips, etc.) in the inside of the ADF, it causes document jams. Check the inside of the ADF and make sure
there is no metal object.
Be sure to remove metal object (paper clips, etc.) from the document before scanning.
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
6.2 Indications of operator panel for errors
When any error occurrs, the operator panel indicates "U" followed by a number for temporary errors or "E" followed by a number for device
alarms (permanent error). Temporary errors can be resolved by the operator, but the device alarm requires recovery works by support
engineers.
When Error Recovery Guide is installed on your PC, its window appears when Windows is started up. If any error or device alarm occurred,
this software displays information such as error names and error codes regarding the error/alarm. Record the information and click [Details]
on its window to learn detailed information for trouble shooting.
Temporary Errors :
A number appearing in alternation following the "U" refers to the following type of errors:
Indication Meaning
U1 A paper feed error occurred.
U2 A double feed error occurred.
U4 The ADF cover is opened.
U6 The print cartridge is not installed (*).
U7 A paper detection failure has occurred at Imprinter.(*)
* "U6" and "U7" are temporary errors related with the Imprinter option (sold separately).
HINT
Error Recover Guide is stored in Setup CD-ROM. When installing the application software, refer to "2.3.3 Installing other application
programs" in fi-5650C Getting Started.
1 | 2|3
All Rights Reserved, Copyright (C) PFU LIMITED 2004

CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
6.2 Indications of operator panel for errors (Continued from the previous page)
Device alarm:
A number appearing in alternation following the "E" refers to the following type of device alarms:
Indication Meaning
E2 Optical error (ADF front)
E3 Optical error (ADF back)
E4 Motor fuse malfunction
E5 Lamp fuse malfunction
E6 Operator panel malfunction
E7 EEPROM malfunction
E8 SCSI interface fuse malfunction
E9 Image memory malfunction
When you encounter any alarm, turn off and on the scanner. If the alarm is still displayed on the Function No. display, contact the dealer
where you purchased the scanner or an authorized FUJITSU scanner service provider.
1| 2 | 3
All Rights Reserved, Copyright (C) PFU LIMITED 2004