Fujitsu M3096E+ Manual

FUjiiSU
M3096E.+ /F+
Image Scanner
Operator’s Guide
3FH5020E 01

REVISION RECORD
Edition Date published
01 June, 1990
Revised conbntr
Specihcatlon No.: 50FH5020E
Comments concerning this manual should be addressed to one of the lollowmg addresses:
FUJITSU LIMITED
lnternatronal Marketmg
Marunouchl l-6-1, Chiyoda-ku. Tokyo 100 JAPAN
TEL: [phone]
FAX: [phone]-9353
FUJITSU NORDIC AB
Torggatan 8, 171 54. Solna. SWEDEN
TEL: (46) E-764-76-90
FAX: [phone]
TLX: 13411 FNAB S
TLX: J22833
Cable: “FUJITSU LIMITED TOKYO” FUJITSU ITALIA S.p.A.
Via Melchiorre Gloia. 8. 20124 Milano. ITALY
FUJITSU AMERtCA INC.
3055 Orchard Drive, San Jose, Callfornla 95134-2022. U.S.A.
TEL: (l-408) 432-l 300
TEL: [phone]
FAX: [phone]
TLX: 350142 FJITLY I
FAX: [phone]
TLX: 230-l 76207
TWX: 910-338-2193
FUJITSU AUSTRALIA LIMITED
475 Victoria Avenue, Chatswood. N.S.W. 2067, AUSTRALIA
TEL: [phone]
FUJITSU CANADA INC.
6280 Northwest Drive, Mtsslssauga. Toronto, Ontano. CANADA FAX: 2-41 l-8603, 8362
TLX: 25233
TEL: [phone] -
FAX: [phone]
TLX: 968132
FUJITSU HONG KONG LIMITED
R.M. 1831, Sun Hung Kai Centre. 30 Harbour Road,
HONG KONG
FUJITSU EUROPE LIMITED
2, Longwalk Road, Stockty Park,
West Drayton, Middlesex UBl 1 1AB. ENGLAND
TEL: [phone]
FAX: [phone]
TLX: 263871 FEL SP G
FUJITSU DEUTSCHIAND GmbH
RosenheimerstraOe 145.0-6000 Miinchen 80, F.R. GERMANY
TEL: [phone]
FAX: [phone] or 3
TLX: 897106 FDG D
TEL: [phone]
FAX: [phone]
TLX: 62667
FUJITSU ESPArilA. S.A.
Edificro Torre Europa, Paseo de la Castellana 95, Madrid 28046, SPAIN
TEL: (34-l) 581-8000
FAX: l-581-8300
TLX: 23007
The contents of this manual are subject to
change without prior notice.
All Rights Reserved,
FAI Copyright 01990 FUJITSU LIMITED.
50FH5020E-01 i

LIST OF EFFECTIVE PAGES
PAGE REV
Cover 01
Blank -
I 01
ir 01
iir 01
Blank -
V 01
vi 01
vii 01
vii1 01
ix 01
x 01
l-1 01
1-2 01
2-1 01
2-2 01
2-3 01
2-4 01
2-5 01
2-6 01
2-7 01
2-6 01
2-9 01
2-10 01
2-11 01
2-12 01
2-13 01
2-14 01
2-15 01
2-16 01
2-17 01
2-18 01
3-1 01
3-2 01
4-1 01
4-2 01
4-3 01
4-4 01
4-5 01
4-6 01
4-7 01
4-8 01
4-9 01
4-10 01
4-11 01
4-12 01
4-13 01
4-14 01
4-15 01
4-16 01
5-1 01
PAGE REV
5-2 01
6-1 01
6-2 01
Reader
Comment -
Card
Blank -
Cover 01
50FH5020E-01 ...
111

CONTENTS
CHAPTER 1 GENERAL ........................................ .......... l-l
CHAPTER 2 INSTALLATION ............................................ 2-l
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.8.1
2.8.2
2.9
Precautions of Installation ............................................ 2-l
Unpackaging ........................................................ 2-2
Checking Received Products .......................................... 2 - 4
Parts Names ....... .................................. ............... 2-6
Carrier Fixing Bracket Removal ...................................... 2 - 8
Fixing Screw for Transportation Removal .............................. 2-10
Cable Connection .................................................... 2-11
Dynamic Threshold Circuit or Image Processing Circuit
Option Installation .................................................. 2-13
DTC installation .................. .................................. 2-13
IPCinstallation ..................................................... 2-15
Interface PCA Option Installation ..................................... 2-17
CHAPTER 3 PRECAUTIONS ............................................ 3-l
CHAPTER 4 OPERATION ............................................... 4 - 1
4.1 PowerON/OFF ...................................................... 4-l
4.2 Appearance and Functions of Operator Panel ........................... 4 - 1
4.3 ADFPaperChuteSetting(EtypeonIy1 ................................ 4-6
4.4 Document Setting Method ............................................ 4 -7
4.4.1 Flat-bed ............................................................ 4-7
4.4.2 Automatic document feeding (E type only) ............................. 4-10
4.5 Removing Jammed Documents (E type only) ........................... 4-14
4.6 Thick Paper Documents Feeding (E type only) .......................... 4 - 15
CHAPTER 5 TROUBLESHOOTING ...................................... 5-l
CHAPTER 6 CLEANING ................................................. 6 - 1
6.1 Cleaning Document Cover and Document Board Glass .................. 6-l
6.2 Cleaning the ADF Section ............................................ 6-l
50FH5020E-0 1 V

FIGURES
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10
2.11
2.12
2.13
2.14
2.15
3.1
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
6.1
wee
Unpackaging ....................................... ................. 2-3
Receivedproducts ................................ ................... 2-4
M3096E + parts names ............................................... 2-6
M3096F + parts names ................................. .............. 2-7
Location of fixing screw for transportation ............................. 2- 10
Signal cable connection ................. ............................. 2-11
Power cable connection ............ ................................... 2-12
Main cortrol PCA removal ............................................ 2- 13
DTCPCAconnection ................................................. 2-14
PCAs insertion ................ ...................................... 2-14
Main control PCA removal ........................................... 2- 15
IPC PCA connection .................. ............................... 2-16
PCAsinsertion ...................................................... 2-16
Rearcoverremoval .................................................. 2-17
Interface PCA installation ................ ............................ 2-17
Cleaning the document board glass .................................... 3- 1
Powerswitch ....................................................... 4-l
M3096E+operatorpanel ............................................ 4-2
M3096F+operatorpanel ............................................. 4-2
ADF paper chute setting ............................................. 4-6
Flat-bedreading ..................................................... 4-7
Removing the document cover ........................................ 4 - 9
Loading the document ................................................ 4-12
Removing jammed documents ......................................... 4 - 14
Paper selection lever setting .......................................... 4 - 15
Cleaning location (ADF section) .............................. ......... 6-2
50FH5020E-0 1 vii

TABLES
2.1 Check list ........................................................... 2-5
4.1 Switch names and functions .......................................... 4-3
4.2 Indicator names and functions ........................................ 4-4
6.1 Check items ......................................................... 5-l
50FH5020E-0 1 ix

CHAPTER 1 GENERAL
The M3096E +/F+ Image Scanner reads image information on a document and inputs the
information into the host computer. The image scanner consists of the image reading
mechanism, document feed mechanism, microprocessor control circuit, operator panel and
power supply.
The features of this device are:
l A document as large as Double-Letter size can be read.
l High-speed reading (less than 8 seconds for Double-Letter size document)
0 High-resolution reading (400 DPI)
l Compact desktop size
l Automatic document feeder (ADF) (M3096E + only)
60FH5020E-01 l-l

CHAPTER 2 INSTALLATION
I.
2.1
2.2
2.3
2.4
2.6
2.6
2.7
2.8
2.9
Precautions of Installation
Unpackaging
Checking Received Products
Parts Names
Carrier Fixing Bracket Removal
Fixing Screw for Transportation Removal
Cable Connection
Dynamic Threshold Circuit or Image Processing
Circuit Option Installation
Interface PCA Option Installation
This chapter explains the unpackaging procedure, installation procedure and confirmation
of operation.
2.1 Precautions of Installation
Pay attention to following matter before unpackaging and installation.
Do not install to place where the vibration way occur.
Keep the scanner out of the sun. Do not install near the heat source.
Do not place around scanner the material which shuts off the air circulation.
Do not install to humid or dusty place.
Do not use the wall socket with connecting devices which may make noise, for
examply motor.
Use the suitable AC power source. Using unsuitable AC power source causes
trouble.
SOFH5020E-01 2-l

2.2 Unpackaging
Perform unpackaging according to following procedure.
Q Remove two joints.
8 Pull up the carton to remove.
0 Remove the upper retainer.
@ Take out the accessories and test certificate.
0 Take out the scanner.
8 Take out the scanner from vinyl bag and remove the protection tape.
@I Check the accessories by refering to Figure 2.2 and Table 2.1.
2-2 50FH5020E-01

Upper carton
\
Joint
b
Upper Q
retainer-L
Lower
retainer-
Lower carton
B
Upper
retainer-R Accessories
/
Test certificate
Lower retainer-R
Figure 2.1 Unpackaging
SOFH5020E-01 2-3

2.3 Checking Received Products
Check that the following items have been received.
Extensio
(Etype only)
Test
Certificate
1-7
Fuses (For USA) (For Europe)
Power cable
Test certificate
Note:
Figure 2.2 Received products
For E type, one stacker and two extensions are in another package.
2-4 50FH5020E-01

Table 2.1 Check list
I No. Name 1Quantity Remarks I
1
I-
2-1
Power cable
Fuses
1
1
Fuses I 1
Fuses I 3
4.0 A
For 100 to 120 VAC model I
3.2 A, 1.6 A (For F-type) 1
60FH5020E-01 2-5

2.4 Parts Names
Figures 2.3 and 2.4 describe parts names.
Document
cover , DocumTt holding pad
Document board (Glass)
Extension \
Pow:r switch
-Operator panel
(2 rows)
lever
Power connector
Figure 2.3 M3096E + parts names
2-6 50FH5020E-01

Document cover
(Glass)
\
switch
\ Operator panel
Power connector
Figure 2.4 M3096F + parts names
2-7
SOFH5020E-01

2.5 Carrier Fixing Bracket Removal
At first, remove the carrier fixing bracket from the base of the scanner. This
bracket fixes the carrier unit for transportation.
When the power is turned on with fixing bracket, the alarm lamp turns on. Then,
turn off the power once disconnect the power cable and remove the bracket.
CAUTION
Do not set the scanner turn over and raise.
Q Set the scanner on the edge of the desk in view of the base of ADF section.
@ Confirm with viewing from the lower side that the carrier fixing bracket is
attached.
Carrier fixing bracket
2-8 50FH5020E-01

6 Remove the screw and remove the carrier fixing bracket. (From position @)
Install the carrier fixing bracket at position 0.
Left side ront side
When transporting
Carrier fixing bracket
CAUTION
When transportation, shall be in position @.
SOFH6020E-01 2-9

2.6 Fixing Screw for Transportation Removal
Open the document cover and remove the fixing screw for transportation.
Fixing screw for
Figure 2.6 Location of fixing screw for transportation
2-10 50FH5020E-01

2.7 Cable Connection
Connect the signal cable and power cable as follows.
@ Confirm that the power switches of the image scanner and host computer have
been set to OFF.
@ Connect the image scanner to the host computer with signal cables V and R.
Rear of
To host computer
Figure 2.6 Signal cable connection
Insert the two cables as shown in Figure 3.3. Fasten the two catches to signal cable
V and fix signal cable R with the screws.
The other end of each cable should be attached to the host computer in the same
way.
50FH6020E-01 2-11

Insert the power cable into its connector on the rear of the image scanner.
Also insert the power cable into a 3-pin power outlet.
Power cable
(3-pin outlet)
2-12
Figure 2.7 Power cable connection
50FH5020E-01

2.8 Dynamic Threshold Circuit or Image Processing Circuit Option Installation
2.8.1 DTC installation
(1) Remove the main control PCA
Loosen the front cover screw and remove the front cover from the scanner.
Remove the screws “C” and “D”, the board support, and the F-plate.
(Do not remove the nickel cloth from the F-plate.)
Remove all connectors on thefront end of the PCA.
Hold clamps at both ends of the PCA with hands and pull toward you.
/
F-plate
\ Front cover
Screws D
nl3
0 ’I
Screw C
Outer view of board support
Figure 2.8 Main control PCA removal
60FHS020E-01 2-13
-