Fujitsu ScanSnap iScanner fi-6010N Configuration guide

BEFORE CLEANING
Push the ADF release button, hold both sides of
the top cover and lift open
ADF Cover
ADF Release Button
2
3
4
1Pad Assy
Wipe downwards. When cleaning take care to prevent the cloth from catching on the metal parts.
ADF Glass Surfaces x 2
Located on the ADF cover and opposite side. Clean lightly.
Clean lightly taking care not to scratch the surface.
Pick Roller
Clean lightly.
Ultrasonic Sensor
Turn the Scanner OFF while cleaning the following locations
It is recommended that these items be
cleaned EVERY 1,000 SCANS
Using cleaning paper moistened with F1 Cleaner
6
2
3
4
1
5
Pad Assy
Ultrasonic
Sensor Pick Roller
Feed Rollers
Glass Eject Rollers
P.T.O.
Consumables Part Number
Pad PA03289-0111
Pick Roller PA03289-0001
Cleaning Materials SC-CLE-KIT1
5Clean lightly taking care not to roughen the surface.
Eject Rollers x 2
Cleaning Instructions for
fi-6010N Network ADF Scanner

On the “Main Menu” screen press the “Maintenance”
button. The Maintenance screen appears.
Press “Roller Cleaning” to access this screen
Open the top cover. Clean lightly taking care not to
roughen the surface.
Press the “c” key on the keyboard to advance the feed
rollers. Press seven times for one complete revolution.
6Feed Rollers x 2
Turn the Scanner ON while cleaning the following locations
Using cleaning paper moistened with F1 Cleaner
Version #2 - October 2008
Cleaning Instructions for fi-6010N Network ADF Scanner
Fujitsu Europe LImited 6
2
3
4
1
5
Pad Assy
Ultrasonic
Sensor Pick Roller
Feed Rollers
Glass Eject Rollers
For further information please refer to the
fi-6010N Network ADF Scanner Operators Guide
which can be found on our Website:
www.fel.fujitsu.com/scanner
Keyboard
LCD Touch Panel
Touch Panel and Keyboard
The LCD Touch Panel and
Keyboard should be cleaned
with a soft, dry cloth