Fujitsu ScanSnap iScanner fi-6010N Configuration guide





Ultrasonic
Sensor
Glass
Pad Assy.


Eject Rollers
Pick Roller
Feed Rollers

Ultrasonic Sensor
Clean lightly.
Cleaning Instructions for
fi-6010N Network ADF Scanner
It is recommended that these items be
cleaned EVERY 1,000 SCANS
Consumables Part Number
Consumable Kit CON-3289-003A
Cleaning Kit SC-CLE-WGD
Using F1 Impregnated Cleaning Wipes

Pad Assy
Wipe downwards. When cleaning take care to prevent the wipe from catching on the metal
parts.


Turn the Scanner OFF while cleaning the following locations
ADF Glass Surfaces x 2
Located on the ADF cover and opposite side. Clean lightly.
Pick Roller
Clean lightly taking care not to scratch the surface.
P.T.O.

Eject Rollers x 4
Clean lightly taking care not to roughen the surface.
ADF
Cover
ADF Release
Button
BEFORE CLEANING
Push the ADF release button,
hold both sides of the top cover
and lift open

Feed Rollers x 2
For further information please refer to the
fi-6010N Scanner Operators Guide
which can be found on our Website:
http://www.fujitsu.com/emea/products/
January 2010
Using F1 Impregnated Cleaning Wipes
Turn the Scanner ON while cleaning the following locations
PFU Imaging Solutions Europe Ltd Cleaning Instructions for fi-6010N Scanner

On the “Main Menu” screen press the “Maintenance
”button. The Maintenance screen appears. Press “Roller
Cleaning” to access this screen.
Open the top cover. Clean lightly taking care not to
roughen the surface.
Press the “c” key on the keyboard to advance the feed
rollers. Press seven times for one complete revolution.




Ultrasonic
Sensor
Glass
Pad Assy.


Eject Rollers
Pick Roller
Feed Rollers
Touch Panel and Keyboard
The LCD Touch Panel and
Keyboard should be cleaned
with a soft, dry cloth.
Keyboard
LCD Touch
Panel