Fulgor Milano FM4FBM28SS User manual

1
28’ Free standing
Bottom freezer Refrigerator
Model No.: FM4FBM28SS
Dear users, this manual contains the product’s basic knowledge, how to use it, fault
diagnosis and basic troubleshooting methods. In order to better understand and use
this product, please take good care of this manual and read it carefully.

2
IMPORTANT SAFETY INSTRUCTIONS
WARNING
1.Read these instructions.
2. Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5. Do not use your refrigerator near water.
6.Clean only with a damp cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point
where it exits from your refrigerator.
11. Do not attempt to modify or extend the power cord of your refrigerator.
12. Unplug your refrigerator during lightning storms or when it will not be used for long periods of time.
13. Make sure that the available AC power matches the voltage requirements of your refrigerator.
14. Do not handle the plug with wet hands. This could result in an electric shock.
15. Unplug the power cord by holding the plug, never by pulling the cord.
16. Turn off your refrigerator before unplugging it.
17.Refer all servicing to qualified service personnel. Servicing is required when your refrigerator has been damaged in
any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into your
refrigerator, your refrigerator has been exposed to rain or moisture, does not operate normally, or has been dropped.
18. To reduce the risk of fire or electric shock, do not expose your refrigerator to rain, moisture, dripping, or splashing,
and no objects filled with liquids should be placed on top of it.
19 Do not use extension cords or ungrounded (two prong) adapters. If the power cord is too short, have a qualified
electrician install an outlet near your refrigerator. Use of an extension cord can negatively affect your refrigerator’s
performance.
20Your refrigerator is not intended for use by persons (including children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of your refrigerator by a person responsible for their safety.
21 Children should be supervised to ensure that they do not play with your refrigerator.
22If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified person,
in order to avoid a hazard.

3
WARNING
Electric Shock Hazard
Failure to follow these instructions can result in electric shock, fire, or death.
1.WARNING–Keep ventilation openings, in both your refrigerator and the built-in structure, clear of obstruction.
2.WARNING–Do not touch the interior of your refrigerator with wet hands. This could result in
frostbite.
3.WARNING–Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
4.WARNING–Do not damage the refrigerant circuit.
5.WARNING–Do not damage the refrigerant tubing when handling, moving, or using your refrigerator.
6.WARNING–DANGER—Never allow children to play with, operate, or crawl inside your refrigerator.
Risk of child entrapment. Before you throw away your old refrigerator:
•Take off the door.
•Leave the shelves in place so that children may not easily climb inside.
7. WARNING—Do not use electrical appliances inside the food storage compartments of the appliance unless they are
of the type recommended by the manufacturer.
8.Unplug your refrigerator before carrying out user maintenance on it.
9.If power cord is damaged, it must be replaced by the manufacturer, its service agent, or similar qualified persons in order
to avoid a hazard.
10.Follow local regulations regarding disposal of your refrigerator due to flammable refrigerant and gas. All refrigeration
products contain refrigerants, which under the guidelines of federal law must be removed before disposal. It is the
consumer's responsibility to comply with federal and local regulations when disposing of this product.
11. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
12. The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of your refrigerator by a person responsible for their safety.
Children should be supervised to ensure that they do not play with your refrigerator.
13 .This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments.
– farm houses and by clients in hotels, motels and other residential type environments.
– bed and breakfast type environments.
– catering and similar non-retail applications.
Grounding requirement
Your refrigerator must be grounded. Your refrigerator is equipped with a cord having a grounding wire with a grounding
plug. The plug must be inserted into an outlet that is correctly installed and grounded.
Incorrect use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service person if
the grounding instructions are not completely understood, or if doubt exists as to whether your refrigerator is correctly
grounded.
Electrical Connection
WARNING
This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-
prong plug which mates with the standard three prong wall outlets to minimize the possibility of electrical shock.
Do not, under any circumstances, cut or remove the third ground prong from the power cord supplied.
This refrigerator appliance requires a standard 115VAC 60Hzelectrical outlet with three-prong ground.
This refrigerator appliance is not designed to be used with an inverter.
The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.
Never unplug the refrigerator by pulling the power cord. Always grip the plug firmly and pull straight out from the
receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service
technician install an outlet near the appliance. Use of an extension cord can negatively affect the performance of the unit.
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced
by an authorized service center.
Climate Range
The information about the climate range of the appliance is provided on the rating plate. It indicates at which ambient
temperature (that is, room temperature, in which the appliance is working) the operation of the appliance is optimal (proper).
Climate range
Permissible ambient temperature
SN
from +10°C to +32°C
N
from +16°C to +32°C
ST
from +16°C to +38°C

4
T
from +16°C to +43°C
Note：Given the limit values of the ambient temperature range for the climate classes for which the refrigerating appliance
is designed and the fact that the internal temperatures could be affected by such factors as location of the refrigerating
appliance, ambient temperature and the frequency of door opening, the setting of any temperature control device might
have to be varied to allow for these factors, if appropriate.
If the power cable is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Locks
If your Refrigerator is fitted with a lock, keep the key out of reach and not in the vicinity of the applianceto prevent children
being entrapped. When disposing of an old Refrigerator, break off any old locks or latches as a safeguard.
Freon-free
The freon-free refrigerant (R600a) and the foaming insulation material (cyclopentane) that is environmentally friendly are
used for the refrigerator, causing no damage to the ozone layer and having a very small impact on the global
warming.R600a is flammable, and sealed in a refrigeration system, without leakage during normal use. But, in case of
refrigerant leakage due to the refrigerant circuit being damaged, be sure to keep the appliance away from open flames and
open the windows for ventilation as quickly as possible.
I. Product features
★Computer control
Adopting the electronic temperature control mode, the fridge-freezer is designed with a LED display screen, by which the
temperature of each compartment and the working parameters can be managed and set.
★Inverter technology
Integrated with precise frequency conversion, noise reduction, energy saving, precise temperature control and other
technologies, the fridge-freezer boasts of superior performances. Furthermore, working efficiency of the inverter
compressor can be automatically adjusted according to the ambient temperature and the set temperature, so as to keep
the fridge-freezer operating in its optimal state.
★Green technology
The freon-free refrigerant and foaming insulation material are used for the fridge-freezer, causing no damage to the ozone
layer and having a very small impact on the global warming, so it is the environmentally friendly product.
★More user-friendly designs
Such functions as wide working voltage range, automatic temperature control, power-off memory, power-on delay,
automatic alarm, fast freezing, and fridge power-off, etc. are available.
Explosive views and parts list
Due to technological innovation, the descriptions of the product in this manual may not be completely consistent with your
refrigerator. Details are in accordance with the material item.
II. Preparations for use
Installation location
1. Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the
refrigerator near a heat source such as cooker, boiler, and avoid it from direct sunlight, thus guaranteeing the refrigeration
effect while saving energy consumption. Do not locate the refrigerator in the damp place, so as to prevent the refrigerator
No
Description
1
Light
2
Lighting switch
3
Cooling room shelves
4
Vegetable and fruit crisper cover
5
Vegetable and fruit crisper
6
Freezing drawers
7
Door balcony

5
from rusting and leaking electricity .The result of the total space of the room in which the refrigerator is installed being
divided by the refrigerant charge amount of the refrigerator shall not be less than 8 g/ M3.
Note: The amount of refrigerant charged for the refrigerator can be found on the nameplate.
2. Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least 300mm of free space should be spared
at the top side, more than 100mm on both sides, and above 50mm at the back side of the refrigerator.
Dimensions in mm:
W
D
H
A
B
C(
°
)
E
F
703
703
1855
1165
1360
125
±
5
50
100
Note：Figure 1, Figure 2 only illustrate the space demand of the product.
3. Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or else, it will give rise to vibration and noise.
When the refrigerator is placed on such flooring materials as carpet, straw mat, polyvinyl chloride, the solid backing plates
should be applied underneath the refrigerator, so as to prevent color change due to heat dissipation.
Unobstructed ventilation shall be maintained around the appliance or in an embedded structure.
Preparations for use
1. Standing time
After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to energize the
refrigerator after more than 1 hour of standing, so as to ensure its normal operation.
2. Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
3. Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the freezer door, if the temperature inside
the freezer compartment drops obviously, it indicates the refrigeration system is working normally.
4. Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically controlled
according to the user’s temperature setting. After the refrigerator is fully cooled, put in foods, which usually need 2~3 hours
to be fully cooled. In summer, when the temperature is high, it takes more than 4 hours for the foods to be fully cooled (Try
to open the refrigerator door as less as possible before the internal temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether the ground wire and leakage circuit
breaker are normal. If vibration noises are produced due to the refrigerator contacting the wall or if the wall gets blackened
by air convection around the compressor, move the refrigerator away from the wall. Setting up the refrigerator may cause
jamming noise or image chaos to the mobile phone, fixed-line telephone, radio receiver, television set surrounding it, so
try to keep the refrigerator as far away as possible in such case.
III. Functions
The display panel is designed on the fridge door, illustrated as the following figure.

6
Function Setting
When the refrigerator system is connected to power supply for the first time, all icons on the display panel gets illuminated
for 2s, and the system runs in the Smart mode by default. When all the doors are closed, the display gets extinguished
automatically if no key operation within 3 minutes. When the display is off, it will light up if any door is opened or any key
is pressed.
The following key operations are valid only when the keys are unlocked and gets illuminated on the display.
1.1Temp. setting
1）Fridge temperature setting
Press the Temp. Zone key to select the fridge zone, with the corresponding icon flickering, and then press the Temp. key
to adjust the temperature, finally press the OK/Lock or wait for 5s to validate the above temperature setting.
The fridge temperature setting cycles as following:
5→6→7→8→OFF→2→3→4→5；
OFF refers to Fridge Off, and when OFF takes effect, the fridge will stop cooling.
Take foods out of the fridge compartment before setting this function.
2）Freezer temperature setting
Press the Temp. Zone key to select the freezer zone, with the corresponding icon flickering, and then press the Temp.
key to adjust the temperature, finally press the OK/Lock or wait for 5s to validate the above temperature setting.
The freezer temperature setting cycles as following:
18→-17→-16→-24→-23→-22→-21→-20→-19→-18
1.2 Fast Cooling
1) When the fast cooling function is enabled, temperature will be set at 2℃, with the compartment temperature reduced
rapidly, so that foods can be kept in fresh condition with their nutrition not lost.
Under the ‘Fast Cooling’ mode, the compartment temperature is subjected to no change.
2) Enabling the Fast Cooling function
Press the Function key to select Fast Cooling until the corresponding icon gets flickering, and then press the
OK/Lock key within 5s for confirmation. If the OK/Lock key is not pressed within 5s, the setting will be invalidated.
3) Exiting the Fast Cooling function
Under the Fast Cooling mode, press the Function key to select Fast Cooling until the corresponding icon gets
flickering, and then press the OK/Lock key for confirmation, the Fast Freeze function will be disabled.
When the Smart function or Holiday function is enabled, the Fast Cooling function will be disabled automatically.
1.3Fast Freezing
1)When the Fast Freezing function is enabled, the freezer temperature will be controlled at -32℃automatically, and after
26 hours of running, the Fast Freezing function will be disabled. Cooling down the freezer temperature in a rapid manner
is beneficial to the prevention of food nutrition against lost and the preservation of freshness.
Under the Fast-Freezing mode, the freezer temperature is subjected to no adjustment.
2) Enabling the Fast-Freezing function
Press the Function key to select Fast Freeze until the corresponding icon gets flickering, and then press the
OK/Lock key within 5s for confirmation. If the OK/Lock key is not pressed within 5s, the setting will be invalidated.
3) Exiting the Fast-Freezing function

7
After a cumulative running period of 26 hours, the Fast Freeze function will stop automatically.
Under the Fast Freeze mode, press the Function key to select Fast Freeze until the corresponding icon gets
flickering, and then press the OK/Lock key for confirmation, the Fast Freeze function will be disabled.
When the Smart function is enabled, the Fast-Freezing function will be disabled automatically.
1.4 Holiday
1）When the Holiday function is enabled, the freezer temperature will be controlled at 14℃. When you are out for a quite
long time, you can set the Holiday function to keep the refrigerator running with low energy consumption, while ensuring
the fresh food compartment is free from undesirable smell and the freezer compartment operates normally.
Be sure to take out all foods from the fresh food compartment before setting this function.
Under the Holiday mode, the fridge temperature is subject to no change.
2）Enabling the Holiday function
Press the Function key to select Holiday until the corresponding icon gets flickering, and then press the OK/Lock
key within 5s for confirmation. If the OK/Lock is not pressed within 5s, the setting will be invalidated.
3）Exiting the Holiday function
Under the Holiday mode, press the Function key to select Holiday until the corresponding gets flickering, and then
press the OK/Lock key for confirmation. The Holiday function will be disabled.
When the Smart or Fast Cooling function is enabled, the Holiday function will be disabled automatically.
1.5 Smart
1）When the Smart function is enabled, the temperature of the fresh food compartment is controlled at 4℃, and that of the
freezer compartment at - 18℃, so that foods can be stored in the best condition while the refrigerator is running more
efficiently and with better performance.
Under the Smart mode, the fresh food compartment temperature and the freezer compartment temperature are
subject to no change.
2）Enabling the Smart function
Press the Function key to select Smart until the corresponding icon gets flickering, and then press the OK/Lock key
within 5s for confirmation. If the OK/Lock is not pressed within 5s, the setting will be invalidated.
3）Exiting the Smart function
Under the Smart mode, press the Function key to select Smart until the corresponding gets flickering, and then press
the OK/Lock key for confirmation. The Smart function will be disabled.
When the Holiday or Fast Freeze function is enabled, the Smart function will be disabled automatically.
1.6Door open alarm
If the fridge door is open for more than 3 minutes, buzzer alarm will sound, which can be stopped when any key is
pressed, but will be restored after 3 minutes if the door keeps open. The alarm will not stop until the door is closed.
1.7Power cut memory
In case of power failure, the refrigerator will maintain the operating state before power failure when power supply is
restored.
1.8Power-on delay
In order to protect the refrigerator compressor from being damaged in the case of short-time power failure (i.e., less
than 5 minutes), the compressor will not start immediately after it is powered on.
1.9Over-temperature alarm (only after power outage)
When the refrigerator system is powered on, if the freezer sensor temperature is higher than -10℃, digits of the
freezer zone get flickering on the display. The freezer temperature can be displayed when any key is pressed, and the
normal display will be restored when any key is pressed again or after 10s.
1.10 Fault alarm
In case E0,E1,E2,EH, or EC is displayed on the operation panel, it indicates fault with the refrigerator. Please contact
customer service in such case.
IV. Instructions for food storage
Precautions for use
The appliance might not operate consistently (there is possibility of defrosting or temperature becoming too warm in
the frozen food compartment) when used for an extended period of time below the cold limit of the temperature range
for which the refrigerating appliance is designed
The information of climate type of the appliance is provided on the rating plate.
The internal temperature could be affected by such factors as the location of refrigerating appliance, ambient
temperature, and frequency of door open, etc., and if appropriate, a warning that setting of any temperature control
device might have to be varied to allow for these factors should be made.
Effervescent drinks should not be stored in the freezer compartment or the low-temperature compartment, and some
products such as water ices should not be consumed too cold.
Food storage location
Due to the cold air circulation in the refrigerator, the temperature of each area in the refrigerator is different, so different
kinds of food should be placed in different areas.
The fresh food compartment is suitable for the storage of such foods as need not to be frozen, the cooked food, beer,
eggs, some condiments that need cold preservation, milk, fruit juice, etc. The crisper box is suitable for the
preservation of vegetables, fruits, etc.
The freezer compartment is suitable for the storage of ice cream, frozen food and the foods to be preserved for a

8
long time.
Use of the fresh food compartment
Set the temperature of the fresh food storage compartment between 2 ℃~ 8 ℃, and store the foods that are intended
for short-term storage, or to be eaten at any time in the fresh food compartment.
Fridge shelf: When removing the shelf, lift it up first, and then pull it out; and when installing the shelf, place it into position
before putting it down. Keep the shelf rear flange upward, to prevent foods from contact the liner wall. When taking out or
putting in the shelf, hold it firmly, and handle with care to avoid damage.
Crisper box: Pull out the crisper box for access to food. After using or cleaning the cover plate of the crisper box, be sure
to put it back onto the crisper, so that the internal temperature of the crisper box will not be affected.
Use of the humidity regulating rod of the crisper box
The humidity regulating rod is used to preserve moisture inside the crisper box, so as to keep fresh the vegetables
and fruits stored inside.
When the humidity regulating rod is adjusted to the right side, with more holes exposed, the internal moisture of
the crisper box can be maintained at the low level.
When the humidity regulating rod is adjusted to the left side, with less holes exposed, the internal humidity of the
crisper box can be maintained at the high level.
Cautions for food storage
You’d better clean the foods and wipe them dry before storing them inside the refrigerator. Before foods are put in the
refrigerator, it is advisable to seal them up, to prevent water evaporation to keep fresh fruits and vegetables, and also
avoid odor
Do not put too many or heavy foods inside the refrigerator. Keep enough space between foods; if too close, the cold air
flow will be blocked, thus affecting the refrigeration effect. Do not store excessive or overweight foods, to avoid the shelf
from being crushed. When storing the foods, keep a distance away from the inner wall; and do not place the water-rich
foods too close to the fridge rear wall, lest they get frozen on the inner wall.
Categorized storage of foods：Foods should be stored by category, with the foods you eat every day placed in front of
the shelf, so that the door open duration can be shortened and food spoilage due to expiration can be avoid.
Energy-saving tips: Allow the hot food to cool down to the room temperature before putting it in the refrigerator. Put the
frozen food in the fresh food compartment to thaw, using the low temperature of the frozen food to cool the fresh food, thus
saving energy.
Storage of fruits and vegetables
In the case of refrigerating appliances with chiller compartment, a statement to the effect that some types of fresh
vegetables and fruits are sensitive to cold and therefore are not suitable for storage in this kind of compartment should be
made.
Use of the frozen food storage compartment
The freezer temperature is controlled below -18 ℃, and it is advisable to store the food for long-term preservation in the
freezer compartment, but the storage duration indicated on the food packaging should be adhered to.
The freezer drawers are used to store food that needs to be frozen. Fish and meat of large block size should be cut into
small pieces and packed into fresh-keeping bags before they are evenly distributed inside the freezer drawers.
Fast freezing
(1) Refer to the description about fast freezing function in the “Function” section.
(2) Compared with the normal freezing, fast freezing enables food to pass through the maximum ice crystal formation
zone at the fastest speed. Fast freezing can freeze the food water content into fine ice crystals, without damaging the
cell membrane, so cell juice will not be lost when thawing, and the original freshness and nutrition of food can be
maintained.
(3) The fast-freezing function is designed to preserve nutrition of the frozen food, with the food thoroughly frozen in the
shortest time. Fast freezing consumes more energy than the normal freezing does.
★Allow the hot foods to cool down to the room temperature before putting them in the freezer compartment.
★Do not put a glass container with liquid or the canned liquid that is sealed in the freezer compartment, so as to avoid
burst due to volume expansion after the liquid gets frozen up.
★Divide the food into appropriately small portions
★You’d better pack the food up before freezing it, and the packing bag used should be dry, in case the packing bags are
frozen together. Foods should be packed or covered by such suitable materials as are firm, tasteless, impervious to air
and water, non-toxic and pollution-free, to avoid cross-contamination and transfer of odor.
Tips for shopping the frozen foods
1. When you are buying frozen food, look at the Storage Guidelines on the packaging. You will be able to store each item
of frozen food for the period shown against the star rating. This is usually the period stated as “Best to use them
before×”, found on the front of the packaging.
2.Check the temperature of the frozen food cabinet in the shop where you buy the frozen foods.
3.Make sure the frozen food package is in perfect condition.
4.Always buy frozen products last on your shopping trip or visit to the supermarket.
5.Try to keep frozen food together whilst shopping and on the journey home, as this will help to keep the food cooler.
6. Don’t buy frozen food unless you can freeze it straight away. Special insulated bags can be bought from most
supermarkets and hardware shops. These keep the frozen foods cold longer.
7.For some foods, thawing before cooking is unnecessary. Vegetables and pasta can be added directly to boiling water
or steam cooked. Frozen sauces and soups can be put into a saucepan and heated gently until thawed.
8.Use quality food and handle it as little as possible. When foods are frozen in small quantities, it will take less than for
them to freeze up and thaw.
9. Estimate the amount of foods to be frozen up. When freezing large amounts of fresh food, adjust the temperature

9
control knob to the low mode, with the freezer temperature lowered. So, foods can be frozen up in fast manner, with the
food freshness well kept.
V. Tips for special needs
Moving the refrigerator/freezer
•Location
Do not place your refrigerator/freezer near a heat source, e.g. cooker, boiler or radiator. Avoid it from direct sunlight in out-
buildings or sun lounges.
•Leveling
Make sure to level your refrigerator/freezer using the front leveling feet. If not level, the refrigerator/freezer door gasket
sealing performance will be affected, or even it may lead to the operating failure of your refrigerator/freezer.
After locating the refrigerator/freezer in position, wait for 4 hours before using it, so as to allow the refrigerant to settle.
•Installation
Do not cover or block the vents or grilles of your appliance.
When you are out for a long time
•Take out all foods.
•Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door ajar: block it open or have the
door removed if necessary.
•Keep the cleaned appliance in a dry, ventilated place and away from the heat source, place the appliance smoothly, and
do not place heavy objects on top of it.
•The unit should not be accessible to child’s play.
VI. Maintenance and cleaning
Before cleaning, unplug the power plug first; Do not plug in or plug out the plug with wet hand, because there is a risk
of electric shock and injury. Do not spill water directly on the refrigerator, to avoid rust, electricity leakage and accidents.
Do not stretch your hands into the bottom of the refrigerator, since you might be scratched by sharp metal corners.
Internal cleaning and external cleaning
The food residuals in the refrigerator are liable to produce bad odor, so the refrigerator must be cleaned regularly. The
fresh food compartment is usually cleaned once a month.
Remove all shelves, crisper box, bottle racks, cover board, and drawers etc., and clean them with a soft towel or sponge
dipped in warm water or neutral detergent.
Clear off the dusts accumulated on the rear panel and side plates of the refrigerator often.
After using detergent, be sure to rinse it with clean water, and then wipe it dry.
Do not use bristle brush, steel wire brush, detergent, soap powder, alkaline detergent, benzene, gasoline, acid, hot
water and other corrosive or soluble items to cleanse the cabinet surface, door gasket, plastic decorative parts, etc., so
as to avoid damage.
Carefully wipe dry the door gasket, clean the groove using a wooden chopstick wrapped with cotton string. After the
cleaning, fix the four corners of the door gasket first, and then embed it segment by segment into the door groove.
Interruption of power supply or failure of the refrigerating system
•Take care of the frozen foods in the event of an extended non-running of the refrigerating appliance (such as interruption
of power supply or failure of the refrigerating system).
•Try to open the refrigerator door as less as possible, in this way can food safely and freshly kept for hours even in hot
summer.
•If you get the power outage notice in advance：
1) Adjust the thermostat knob to the high mode an hour in advance, so that foods get fully frozen (Do not store new food
during this time!). Restore the temperature mode to the original setting when power supply becomes normal in a
timely manner.
2) You can also make ice with a watertight container, and put it in the upper part of the freezer, so as to extend the time
for fresh food to be stored.
Note: Once the refrigerator is used, you’d better use it continuously; and under normal circumstance, do not stop its
use, so as not to affect the service life.
Defrosting
This appliance is designed with automatic defrosting function, thus no need to defrost it manually.
Changing the lamp
The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long service life. In
case of any abnormality, please contact the after-sales personnel for visiting service. The lamps can only be replaced by
the manufacturer, together with a part of the appliance.
Safety-check after maintenance
Is the power cord broken or damaged?
Is the power plug firmly inserted into the socket?
Is the power plug abnormally overheat?
Note: Electric shock and fire accident may be caused in case the power cord and plugis damaged or stained by

10
dust. If any abnormality, please unplug the power plug and get in contact with the vendor.
How to disassemble the parts.
Fridge door bottle rack:
Hold two sides of bottle rack with both hands, squeeze inward to make it deform slightly, and then push it up.
Fridge shelf:
Hold one end of the shelf, and lift it up while pulling it outwards.
VII. Simple fault analysis and elimination
With regard to the following small faults, not every failure needs to be fixed by the technical service personnel; you can
try to solve the problem.
Case
Inspection
Solutions
Completely non-
refrigeration
•Is power plug off?
•Are breakers and fuses broken?
•No electricity or line trip?
•
Re-plug
•Opening the door and checking whether the lamp
is lit.
Abnormal noise
•
Is refrigerator stable?
•Does refrigerator contact the wall?
•
Adjusting refrigerator's leveling feet.
•Off the wall.
Poor refrigerating
efficiency
•
Do you put hot food or too much food?
•Do you open the door frequently?
•Do you clip food bag to the door gasket?
•Direct sunlight or near a furnace or
stove?
•Is it well-ventilated?
•Temperature setting in too high?
•Putting food into refrigerator when hot food
becomes cool.
•Checking and closing the door.
•Removing the refrigerator from the heat source.
•Emptying the distance to maintain good
ventilation.。
•
Setting to the appropriate temperature.
Peculiar smell in
refrigerator
•
Any spoiled food?
•Do you need to clean refrigerator?
•Have you packed food of strong flavors?
•Throwing away spoiled food.
•Cleaning refrigerator.
•
Packing food of strong flavors.
•Temperature
setting impossible
•Check whether the Smart, Fast Freeze or
Holiday function is enabled on the display
panel.
•Exit the special function mode, and then set up the
temperature (for details refer to the Functions
section)
•Freezer
temperature
displayed on the
panel, with the
temperature digits
flashing
•Is power cut before? •P
ress any key to lift the alarm (refer to the
Overtemperature alarm function), and then check the
foods inside the fridge and freezer compartments get
spoiled.
(Note: If the above descriptions are inapplicable to troubleshooting, do not disassemble and repair it yourself. Repairs
carried out by inexperienced persons may cause injury or serious malfunctioning. Contact the local store where your
purchase was made. This product should be serviced by an authorized engineer and only genuine spare parts should be
used.
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean the
appliance, leaving the door ajar to prevent unpleasant smells.
VIII. Certifications
Electrical information
This electrical appliance must be grounded
This product is equipped with a plug, which is suitable for all houses equipped with sockets meeting the current
specifications
If the fitted plug is not suitable for your socket outlets, it should be cut off and carefully disposed of. To avoid a possible
shock hazard, do not insert the discarded plug into a socket.
This product complies with the following EEC directives.

11
IX. Safe recovery instructions
Disposal
Old appliances still have some surplus value. An environmentally friendly approach will ensure that valuable raw materials
are recycled.
The refrigerants used in your equipment and insulation materials require special handling procedures. Make sure there is
no pipe damage on the back of the equipment before handling.
Up-to-date information on the options for disposing of old equipment and packaging from old equipment can be obtained
from the local municipal office.
Correct disposal of this product
This marking indicates that this product should not be disposed
with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or contact the retailer where
the product was purchased. They can take this product for environmentally safe recycling.

12
Reversing the Door Swing
How to disassemble the fridge/freezer door.
1. a．Screw off the hinge cover screw, remove the
hinge cover, and insert the communication wire
into the hole on the cabinet top.
b．Remove the 4 screws of the upper hinge cover,
remove the hinge cover, and pry up the door
bushing and small end cap cover on the door.
c．Insert the door bushing and door
communication wire into the hole on the door,
and then put on the small end cap cover.
d．Screw off the 2 screws as shown below to
remove the hole cover on the cabinet top, get the
cabinet communication wire out of the hole; Pry
up the small end cap cover on the door, and get
out the door bush and door communication wire.
e．Insert the door bush into the round hole on
the door, and put on the small end cap cover.
f. Move the fridge door upward by over 50mm to
remove the door.
2. a．Screw off the 3 screws of the middle hinge
cover, and then remove the middle hinge.
b．Move the freezer door upward by over 50mm to
remove the door.

13
c．Remove the adjustable front feet under the
lower hinge, and screw off the 4 screws of the lower
hinge to disassemble the lower hinge.
In this way, the door disassembly is finished.
How to assemble the door and lower hinge
accessories correspondingly on the opposite
side.
a．Take the door bushing out as shown below,
and assemble it to the corresponding position on
the opposite side.
b．Screw off the screws of the stopper as shown
below, and assemble them to the other side of the
door.
c．Remove the axle and two stoppers on the lower
hinge, and assemble them to the position as shown
below.
How to assemble the fridge door and freezer
doors to the opposite side.
1. a ．Remove the adjustable front foot as
shown below by hand, assemble the lower
hinge to the other side of the cabinet, and fix
the screws.
b. Assemble the shorter adjustable front foot to the
lower hinge side, and adjust the height of the foot to
make the refrigerator level.
2. Install the freezer door, turn the middle hinge
by 180 ℃, assemble it to the other side of
the cabinet, and screw up the 3 screws to fix
the middle hinge.

14
3. Install the fridge door, assemble the left
upper hinge to the other side of the cabinet,
and use a tool to screw up the 4 screws to
fix the upper hinge.
Then, connect the door communication wire
and the cabinet communication wire, install
the left upper hinge cover, and fix it using a
screw.
4. Assemble the hole cover to the other side of
the cabinet, and screw up the hole cover.
The door disassembly is finished.
The doors are opened form the left side.
The doors are opened from the right side.
NOTE: If you want to have the door swing reversed, we recommend you to contact a qualified technician. You should only
try to reverse the door yourself if you believe that you are qualified to do so.
All parts removed must be saved to do the reinstallation of the door. You should rest the fridge freezer on something solid
so that it will not slip during the door change process. Do not lay the fridge freezer flat as this may damage the coolant
system. Ensure the fridge-freezer is unplugged and empty. We recommend that 2 people handle the fridge-freezer during
assembly.

WARRANTY
For all the details regarding warranty, please go visit:
www.fulgor-milano.us To obtain service under this
warranty you must:
1. Contact Fulgor-Milano Authorized Service
For all of North America:
Website: http://www.thevettagroup.com/servicerequest.a5w In Eastern Canada (Ontario->East)
Email: [e-mail]
Phone: [phone]
In Western Canada (Manitoba<-West)
Emails: [email protected]
Phone: [phone] x106
In the USA
Email: fulgor@appliances-
support.com Phone: 1-855-4-fulgor (1-
855-438-5467)
2. Provide a copy of your original sales receipt along with model number and serial number information for the
product.
3. Provide Fulgor Milano reasonable opportunity to investigate the claim before the Product or any component of
the Product has been modified and removed.

WARRANTY
www.fulgormilano.us
[e-mail]