FUNAI NB620FX4 User guide

See the Online Owner’s Manual for details:
www.funaiamerica.com
Step 1 Please visit website www.funaiamerica.com
Step 2 Select Download.
Step 3 Type in the Model # “NB620FX4” or“NB620FX4F” and
click “Search”.
Step 4 Select the Manual, and click on “Download”.
For product recycling information, please visit - www.funaiamerica.com
Click on
SETUP MANUAL
1CONNECTIONS
LAN HDMIOUT
Wireless Connection
Wireless
broadband router
Internet
Wired Connection
Modem or
Router
HDMI cable
(not supplied)
or
LAN cable (not supplied)
LAN HDMIOUT
AC plug
Active Internet connection is required to your
modem or broadband router. If there is trouble
connecting to the Internet, refer to the relevant
topics in TROUBLESHOOTING.
Wired and Wireless Connections
2INITIAL SETUP
Please Wait...
Please select the connection method.
Network Selection
1 / 7
Wired
Wireless
Return
Cancel
Would you like to activate the Quick Start Mode?
The unit will start up more quickly, but will consume
more power in standby mode.
Quick Start Mode
On
Off
Return
Would you like to activate the software update
feature? When connected to the Internet,
the unit will automatically check for the latest
software.
Automatically check for latest software
On
Off
Return
AV/SOURCE
Power Button
Welcome!
Next
Cancel
This unit is ready for initialization. Please
follow the on-screen instructions.
Initialization
Please select your language for on-screen
display.
English
Español
Français
Return
Language
Select your language.
Please locate the Source /
Input / AUX /Video button
on TV’s remote control.The
button may vary on the TV
brand and model. Once you
have located the button,
press until you see “Please
Wait...” or the Initial Setup
Menu on the Screen.
Please Wa
Language
he Source
/
ideo button
control.The
y on the TV
el. Once
yo
u
e button,
see “Please
Initial Setup
creen.
If you select “Wired”,
please go to in step .
If you select “Wireless”,
please go to in step .
3
4
n
Pow
wer Button
3WIRED SETUP
It may take a few minutes.
It may take a few minutes.
Please wait a moment. Please press [RETURN] to
stop this operation.
State : Connecting...
Network Settings
6 / 7
Home Network : Pass
Internet : Pass
Network connection succeeds.
End
Network Settings
7 / 7
State : Setting...
Network Settings
6 / 7
Please wait a moment. Please press [RETURN] to
stop this operation.
Network Setup
Network Selection
Please select the connection method.
Wired
Wireless
Return
1 / 7
Cancel
Network Settings
Select whether to set the IP address and other
settings automatically or manually.
Auto
Manual
Return
4 / 7
Cancel
Network Setup
4WIRELESS SETUP
Network Selection
Please select the setting mode.
Auto Scan
Manual
Easy Connect (WPS)
Return
2 / 7
Cancel
Home Network : Pass
Internet : Pass
Network connection succeeds.
End
Network Settings
7 / 7
If your router has a PBC*
(Push Button Conguration)
button, you can use
“Push Button Method”
which is the easiest way to
set up a wireless connection.
If your router does not have it,
please use the “Auto Scan” setup.
* PBC button may be called WPS
button on your wireless router.
Network Selection
Please select the connection method.
Wired
Wireless
Return
1 / 7
Cancel
Network Setup
Access Point Setting
Please select the access point.
3 / 7
Wireless Access Point A
Wireless Access Point B
Wireless Access Point C
Wireless Access Point D
Wireless Access Point E
Wireless Access Point F
Retry
Return
Cancel
Access Point Setting
Please input the WEP/WPA key with software keyboard.
3 / 7
Done Return Clear a/A/@
Enter the security key toyour
wireless router. Key content is case-sensitive.
Please confirm the setting.
SSID
Security
WEP/WPA Key
: Wireless Access Point A
: WPA-PSK (AES)
: xxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxx
Next
Retry
Return
Cancel
Access Point Setting
3 / 7
Network Settings
Select whether to set the IP address and other
settings automatically or manually.
Auto
Manual
Return
4 / 7
Cancel
Network Settings
Please select the setting mode.
Return
2 / 7
Cancel
Auto Scan
Manual
Easy Connect (WPS)
Access Point Setting
Return
2 / 7
Cancel
Push Button Method
PIN Code Method
Please push the PBC (push button configuration) on the wireless router
and select ‘Push Button Method’ button on screen.
Please select ‘PIN Code Method’ button on screen.
After clicking [OK] on “Push Button Method”, push the PBC button on your wireless router.
Network Setup
From here on, the headers will show
“Access Point Setting” when using
“Easy Connect (WPS)” setup.
It may take a few moments.
If “Home Network” passed,
but “Internet” failed, please
contact your Internet service
provider for troubleshooting assistance.
If setup fails using “Easy Connect (WPS)”,
please select “Auto Scan” or “Manual” mode.
Easy
Connect
(WPS)
Auto
Scan
When the unit has successfully been connected to an access point,
appears in the upper left corner of the Home Menu screen.
* This icon does not necessarily mean that this unit is connected to the Internet.
Wireless network setting is completed.
You are ready to enjoy network features over WiFi!
TROUBLESHOOTING
Problem Tip
No power. • Check the AC power cord, if it is properly connected.
• Unplug the AC power cord, and wait for about 5-10
seconds. Plug it back in and attempt to Power On the unit.
No sound or picture. • Make sure both the TV and Blu-ray Disc™ player are
Turned On.
• Confirm the connections to the TV are made properly as
shown in CONNECTIONS.
• Check to see whether the connected TV or another
device supports HDCP. (This unit will not output a
video signal unless the other device supports HDCP.)
No reaction to the
remote control.
• Confirm that the player’s AC power cord is plugged into
a power outlet.
• Check the batteries in the remote control, and make
sure they are inserted properly by + or - symbols.
• Aim the remote at the unit’s remote receiver. Then
press any arrow key and confirm the Power-On indicator
dims and blinks when a remote button is pushed. This
confirms that unit is receiving the remote IR signal.
No high-definition
video signal on the TV
screen.
• Does the disc contain high-definition video and the TV
support it? High-definition video is only available when
the disc contains it and the TV supports it.
Distorted picture. • Sometimes a small amount of picture distortion may
appear. This is not a malfunction.
No sound or
distorted sound.
• Adjust the volume.
• Check the HDMI connection as necessary.
• Make sure the HDMI cable is not plugged into an HDMI-
DVI adapter which does not handle Digital sound.
• Check the settings in “Audio Out” menu.
Cannot play back a
disc.
• Make sure that the product supports the disc.
• Check the region code of the disc. This unit suppor ts
the following region codes.
-Blu-ray Disc™: “A”
-DVD: “ALL” or “1”
• Clean the disc.
Cannot connect to
the network.
• Check to see if the modem / router has Power turned
On.
• Confirm, if the Internet light is showing activity (light
blinking) on the modem / router.
• Check network settings on the unit. Please refer to
Online Owner’s Manual.
• Power cycle the modem’s and/or router’s AC plug from
its AC outlet for 30 seconds, and then plug it back in.
Then, try reconnecting cords. If you have a telephone
/ Internet modem with your cable service, then you
may have to use its reset button or remove the backup
battery to reset this type of modem. Now wait for the
lights to show activity and try reconnecting.
• Check the cable connections to the router.
• If none of above solves trouble, please contact your ISP
(Internet Service Provider) for further assistance.
Cannot use the
wireless connection.
• Once you have activated the wireless connection, please
wait 30 seconds for the connection to be established
after Turning On the unit, before trying to access
network features such as BD-Live™, DLNA home
network server and the third-party network ser vices.
• If appears in the upper left corner of the Home
Menu screen, this unit is connected to an Access Point.
Please contact your ISP for further assistance when you
cannot access BD-Live™ or network services.
If you do not find a solution above, please visit our website
www.funaiamerica.com for the Online Owner’s Manual.
Please download it and then refer to “TROUBLESHOOTING” section
for more information. If additional support is required, please contact
our Customer Service at 1-877-393-8624.
SERVICING
• If this unit becomes inoperative, do not try to correct the problem
by yourself. There are no user-serviceable parts inside. Eject the
disc (if possible), disconnect the USB Memory Stick (if connected),
place the unit into standby mode, unplug the power plug, and then
please visit: www.funaiamerica.com/support or
contact: 1-877-393-8624

DNote
• If you are experiencing signal
issues with your wireless
connection, please confirm that
your wireless router is placed
close enough to the unit.
Connection to a TV
© 2013 Funai Electric Co., Ltd.
Printed in China
ECD07UH / ECD0BUH
2VMN00038 ★★★★★
FUNAI is a registered trademark of Funai Electric Co., Ltd. and may not be
used in any way without the express written consent of Funai.
*2VMN00038*
NB620FX4
NB620FX4F
ECD070BUHNB620FX4FSUv1.indd1ECD070BUHNB620FX4FSUv1.indd1 2013/06/1111:30:512013/06/1111:30:51

SAFETY INSTRUCTIONS
The model and serial numbers of this unit may be found on the cabinet. You should
record and retain those numbers for future reference. Please refer to the LIMITED
WARRANTY for more information.
Model No.:
Serial No.:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSETHIS
APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED
TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The important note and rating are located on the rear or bottom of the cabinet.
The lightning flash with arrowhead symbol,within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
The symbol for CLASS ll (Double Insulation)
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug.A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety.If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs,convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer,or sold with the
apparatus.When a cart is used, use caution when
moving the cart / apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the manual.The user could lose the
authority to operate this equipment if an unauthorized change or modification
is made. This transmitter must be co-located or operated in conjunction with
any other antenna or transmitter.
Disconnect the AC plug to shut the unit Off when trouble is found or
when not in use. The AC plug shall remain readily available.
To completely turn Off the unit, you must unplug theAC power cord.
CAUTION: Danger of explosion if battery is incorrectly replaced.Replace
only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
Do not place the unit on the furniture that is capable of being tilted by a child
and an adult leaning, pulling, standing or climbing on it.A falling unit can cause
serious injury or even death.
INSTRUCCIONES DE SEGURIDAD
El modelo y el número de serie de esta unidad se pueden encontrar en la caja. Deberá
anotar y guardar el modelo y el número de seriepara consultarlos,si los necesita, en el
futuro. Por favor consulte la LIMITEDWARRANTY para mayor información.
Número de modelo:
Número de serie:
ADVERTENCIA:
PARA REDUCIR EL RIESGO DE QUE SE PRODUZCA UN INCENDIO O SE RECIBA
UNA DESCARGA ELÉCTRICA, NO EXPONGA ESTE APARATO A LA LLUVIA
NI A LA HUMEDAD. NO SE DEBERÁ EXPONER EL APARATO NI A GOTERAS
NI A SALPICADURAS, Y NO DEBERÁ COLOCARSE NINGÚN OBJETO QUE
CONTENGA LÍQUIDOS SOBRE ELAPARATO, COMO POR EJEMPLO JARRONES.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVISO:
PARA REDUCIR EL RIESGO DE SUFRIR UNA DESCARGA ELÉCTRICA NO
QUITE LA CUBIERTA (O EL PANEL POSTERIOR). EN EL INTERIOR DEL
APARATO NO HAY PIEZAS QUE DEBA MANIPULAR EL USUARIO. SOLICITE
EL SERVICIO DE REPARACIONES AL PERSONAL DE SERVICIO CUALIFICADO.
Las notas importantes y la calificación se encuentran ubicadas en la parte posterior
o inferior del gabinete.
El símbolo del rayo con punta de flecha, en el interior de un triángulo
equilátero,tiene la finalidad de avisar al usuario de la presencia de
“tensión peligrosa” dentro de la caja del aparato que podría ser de
suficiente intensidad como para constituir un riesgo para las personas
en caso de que éstas recibiesen una descarga eléctrica.
El signo de exclamación dentro de un triángulo equilátero tiene la finalidad
de avisar al usuario de la presencia de instrucciones de utilización y
mantenimiento (servicio) en el material impreso que acompaña al aparato
Símbolo de CLASE ll (doble aislamiento)
IMPORTANTES INSTRUCCIONES
DE SEGURIDAD
1. Lea estas instrucciones.
2. Conserve estas instrucciones.
3. Preste atención a las advertencias.
4. Siga todas las instrucciones.
5. No utilice este aparato cerca del agua.
6. Limpie el aparato sólo con un paño seco.
7. No obstruya ninguna de las ranuras de ventilación. Realice la
instalación según las instrucciones del fabricante.
8. No instale el equipo cerca de elementos para calefaccionar tales
como radiadores, rejillas de calefacción, estufas eléctricas u otros
aparatos (incluidos amplificadores).
9. No desarme el dispositivo de seguridad del enchufe polarizado o con
conexión a tierra. Un enchufe polarizado contiene dos clavijas, una
más ancha que otra. Un enchufe con conexión a tierra contiene dos
clavijas y una tercera clavija con conexión a tierra. La clavija ancha
del enchufe polarizado o la clavija de conexión a tierra representan
dispositivos de seguridad. Si el enchufe del aparato no entra en el
tomacorriente, consulte con un electricista para reemplazar sus
antiguos tomacorrientes.
10. Asegúrese de proteger el cable de alimentación de las pisadas o
torsiones especialmente en la zona de la clavija, en el receptáculo y
en el punto donde el cable sale del aparato.
11. Utilice únicamente los accesorios que especifica el fabricante.
12. Utilice únicamente el carro, atril, trípode,soporte o la
mesa que especifica el fabricante o que se vendió junto
con el aparato. Cuando utilice un carro, sea cuidadoso
al trasladar el conjunto carro/aparato para evitar daños
por caídas de objetos.
13. Desenchufe este aparato si hay tormentas eléctricas o
durante largos períodos de inactividad.
14. Confíe el servicio técnico sólo a personal calificado. El servicio
técnico es necesario cuando el aparato sufre algún tipo de daño,
por ejemplo cuando se dañan los cables de suministro eléctrico o la
clavija,cuando se derrama líquido o se caen objetos sobre el aparato,
cuando se lo expone a la lluvia o a humedad, cuando no funciona
adecuadamente o cuando se cae.
No coloque la unidad sobre un mueble que pueda volcar si algún niño o
adulto lo inclina, empuja, se coloca encima o trepa por él. La caída de la
unidad puede provocar lesiones graves e incluso la muerte.
El aparato no debe colocarse en una instalación empotrada (por ejemplo:
una biblioteca o un estante) a menos que cuente con la adecuada ventilación.
Asegúrese de dejar un espacio de 3,9 pulgadas (10 cm), o más, alrededor
del aparato.
Nunca use un desempolvador a gas en esta unidad.
El gas del interior de la unidad puede inflamarse y explotar.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Manufactured under license under U.S.Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872
& other U.S.and worldwide patents issued
& pending. DTS-HD, the Symbol, & DTS-
HD and the Symbol together are registered
trademarks & DTS-HD Master Audio | Essential
is a trademark of DTS, Inc. Product includes
software. © DTS,Inc.All Rights Reserved.
“Blu-ray Disc™”,“Blu-ray™” and “Blu-ray
Disc™” logo are trademarks of the Blu-ray
Disc Association.
“BD-Live™” and “BD-Live™” logo are
trademarks of the Blu-ray DiscAssociation.
is a trademark of DVD Format/Logo
Licensing Corporation.
“AVCHD” and the “AVCHD” logo are
trademarks of Panasonic Corporation and
Sony Corporation.
“BONUSVIEW™” and “BONUSVIEW™” logo
are trademarks of the Blu-ray DiscAssociation.
KODAK and the KODAK trade dress are
trademarks of Kodak used under license.
The Wi-Fi CERTIFIED Logo is a certification
mark of the Wi-FiAlliance.
Java and all Java based trademarks and logos
are trademarks or registered trademarks of
Oracle and/or its affiliates.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials
or workmanship as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for
one (1) year from the date of original retail purchase. Certain parts are excluded
from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90)
days from the date of original retail purchase.
Note:Any product sold and identified as refurbished or renewed carries a ninety
(90) days labor and parts limited warranty.
LIMITS AND EXCLUSIONS:
THISWARRANTY IS EXTENDED ONLYTOTHE ORIGINAL RETAIL PURCHASER.A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED
TOGETHERWITH THE PRODUCT TO OBTAIN SERVICE UNDERTHIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced,
defaced, missing or if service was attempted by an unauthorized service center. This limited
warranty does not apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur
during normal use. It does not cover damage which occurs in shipment, or failures which are
caused by repairs, alterations or products not supplied by FUNAI CORP., or damage, which
results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation,
improper maintenance, commercial use such as hotel, rental or office use of this product, or
damage which results from fire, flood, lightning or other acts of God.
THISWARRANTY DOES NOT COVER PACKING MATERIALS,ANY ACCESSORIES (EXCEPT
REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR
FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE
FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF
OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS
WARRANTY IS MADE IN LIEU OF ALL OTHERWARRANTIES,EXPRESS OR IMPLIED,AND OF
ALL OTHER LIABILITIES ONTHE PART OF FUNAI,ALL OTHER WARRANTIES INCLUDING
THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN
AUTHORIZED SERVICE CENTER.
THISWARRANTY IS ONLYVALIDWHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED
SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL
RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE
WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.YOU MAY HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY
PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS
PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid,
in either its original packaging or packaging affording an equal degree of protection, to any
AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done
by unauthorized service providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service
inquiries, please contact us at:
FUNAI SERVICE CORPORATION
Tel: 1-877-39-Funai (1-877-393-8624)
www.funaiamerica.com
2200 Spiegel Drive, Groveport, OH 43125
Do not connect your PC directly to the LAN terminal of this unit.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and,if not installed and used in accordance with the instructions,may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.
LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT.
This apparatus employs a laser. Only a qualified service
person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting,public performance and lending of discs
are prohibited.This item incorporates copy protection technology that is
protected by U.S. patents and other intellectual property rights of Rovi
Corporation. Reverse engineering and disassembly are prohibited.
This apparatus should not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided. Make sure to leave a space of 3.9
inches (10cm) or more around this apparatus.
Never use a gas duster on this unit.
The gas trapped inside of this unit may cause ignition and explosion.
ENERGY STAR
®
is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save money and
protect the environment through energy efficient
products and practices.
SUPPLIED ACCESSORIES
• Remote Control (NB997UH / NC263UH)
• Batteries (AAA, 1.5V x 2)
• SETUP MANUAL
LICENSE
This product includes some open source software that is subject to the GNU
General Public License (GPL), GNU Lesser General Public License (LGPL) and/or
copyright licenses, disclaims and notices. You can confirm further information about
these in the “OSS” section in “Settings” of this product. If you are interested in
obtaining GPL source code used in this product,please contact
FUNAI SERVICE CORPORATION
2200 Spiegel Drive, Groveport, OH 43125
[email protected]
This product contains technology subject to certain intellectual property rights of
Microsoft.
Use or distribution of this technology outside of this product is prohibited without
the appropriate license(s) from Microsoft.
See the Online Owner’s Manual for details:
www.funaiamerica.com
TRADEMARK INFORMATION
PLAYABLE MEDIA AND FORMAT
Media
• BD-video • BD-RE/-R • DVD-video • DVD-RW/-R
• CD-DA • CD-RW/-R • KODAK Picture CD
• DTS-CD • USB Memory Stick
Disc and USB Memory Stick Playable Format
• AVCHD (only for DVD) • MP3
• JPEG
ECD070BUHNB620FX4FSUv1.indd2ECD070BUHNB620FX4FSUv1.indd2 2013/06/1111:30:582013/06/1111:30:58