Furinno 10004 User manual

Assembly Instruction
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Approx. 20 minutes
Recomm. 1 Person
Unfold Bin(6)and slide it into the completed unit.
STEP 5
Recommended Maximum Weight
Furinno End Table/ Night Stand
Storage Shelf with Bin Drawer
1000420140409
MODEL : 10004
15.5”(W) x 17.8”(H) x 15.5”(D)DIMENSION :
Tools Required
*Unit in Pound(lbs)
15
15
(6)

1
2
3
8pcs
4pcs
4pcs
A 1pcsTop Panel
Nail Leg
Chipboard Screw
Dowel
4
5
6
4pcs
4pcs
1pcsNon-Wooven Bin
Cam-Lock Nut
Cam-Lock Screw
1.1 Install Cam-Lock Screw(5)on Panel(A)
using screwdriver.
1.2 Install Cam-Lock Nut(4),Dowel(2)and
Nail Leg(3)to Panel(C)as shown.
STEP 1
Attach both Panel(B)to left side Panel(C)
and tighten with Screw(1)using screwdriver
as shown.
STEP 2
B
C
2pcs
2pcsSide Panel
Shelf Panel
STEP 3
Attach the right side Panel(C)to assemble
unit as shown.Tighten with Screw(1)using
screwdriver.
Upright the unit.
Attach Panel(A)to assemble unit as shown.
Lock Cam-Lock Nut(4)using screwdriver.
STEP 4
Note:Arrow on Cam-Lock
Nut should be pointing
towards hole.
No Hardware List Qty No QtyParts List
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.