Furinno 13239 User manual

1323920180412
Tool RequiredTool Required
Approx. 30 minutes
Recomm. 1 Person
Assembly Instruction
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!
1
4
Furinno Simplistic TV Entertainment Center
with Bin Drawers
MODEL : 13239
Recommended Maximum Weight
40
*Unit in Pound(lbs.)
15
10
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
TURN 180°
STEP 13
ASSEMBLED UNIT
STEP 14
ASSEMBLED UNIT
ASSEMBLED UNIT
7
STEP 12
STEP 11
SQUARE LEG 4 PCS
6
SMALL SCREW 12 PCS
3
BIN 1 PC
7
ASSEMBLED UNIT
TOOL REQUIRED
6
6
6
6
3
3
3
3

EXPLODED VIEW
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, soft and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
PARTS LIST
STEP 10
STEP 9
HARDWARE LIST
STEP 1
STEP 2
STEP 7
STEP 8
STEP 5
STEP 6
STEP 3
STEP 4
23
CAM-LOCK SCREW 6 PCS
1 2
6 7
CAM-LOCK NUT 6 PCS
SQUARE LEG 4 PCS BIN 1 PC
SMALL SCREW
3
LARGE SCREW
4
DOWEL 12 PCS
5
20 PCS12 PCS
TOP PANEL 1 PC
A
BOTTOM PANEL 1 PC
B
SHELF PANEL 1 PC
C
LEFT SUPPORT PANEL 4 PCS
D
RIGHT SUPPORT PANEL 2 PCS
E
A
B
C
D
D
DE
E
D
6
6
6
TOP PANEL 1 PC
A
CAM-LOCK SCREW 6 PCS
1
5
TOOL REQUIRED
UNFINISHED EDGE
1
TOOL REQUIRED
A
1
1
1
1
1
LEFT SUPPORT PANEL 4 PCS
D
D
2
CAM-LOCK NUT 4 PCS
DOWEL 8 PCS
ARROW FACING OUTWARD
5
2D
5
2
D
5
2
D
5
2
4
SHELF PANEL 1 PC
C
ASSEMBLED UNIT
TOOL REQUIRED
LEFT SUPPORT PANEL 2 PCS
D
C
D
D
LARGE SCREW 4 PCS
4
4
HOLE EDGE
FINISHED SURFACE
DOWEL
TOOL REQUIRED
4
4
DOWEL
CAM-LOCK NUT
LEFT SUPPORT PANEL 2 PCS
D
4
LARGE SCREW 4 PCS
D
D
TURN 90°
ASSEMBLED UNIT
TOOL REQUIRED
A
1
2
TURN 180°
UNFINISHED EDGE
ASSEMBLED UNIT
TOP PANEL 1 PC
A
TOOL REQUIRED
ARROW FACING OUTWARD
E
5
2
E
5
2
TOOL REQUIRED
1
2
TURN 180°
E
E
E
ASSEMBLED UNIT
5
RIGHT SUPPORT PANEL 2 PCS
E
2
CAM-LOCK NUT 2 PCS
DOWEL 4 PCS
RIGHT SUPPORT PANEL 2 PCS
TOOL REQUIRED
4
4
4
4
TOOL REQUIRED
B
4
4
UNFINISHED SURFACE
UNFINISHED
EDGE
BOTTOM PANEL 1 PC
B
ASSEMBLED UNIT
ASSEMBLED UNIT
4
LARGE SCREW 4 PCS
4
LARGE SCREW 8 PCS