Furinno 11159 User manual

Assembly Instruction
Install Square Leg (5) on Panel (B) with
Screw (2).
STEP 6
Approx. 30 minutes
Recomm. 2 Person
Tools Required
Attach Bottom Panel (B) to assembled unit
with Screw (1).
STEP 7
Unfold the Bin (9) and slide into the storage.
STEP 9
Upright the unit.
Attach Back Panel (H) to the back side
with Power Pin (6).
STEP 8
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
(6)x16pcs
(1)x6pcs
(2)x12pcs (5)x4pcs
(9)x4pcs
Furinno Multipurpose Storage Cabinet
with 4 Bin-Type Drawer
1115920180503
MODEL : 11159
its Space. its Budget
15
*Unit in Pound(lbs)
5
5
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!

1
2
3
4
5
6pcs
12pcs
2pcs
18pcs
16pcs
4pcs
A
B
C
D
E
1pc
1pc
1pc
1pc
1pc
6
Long Screw
Short Screw
Long Dowel
Short Dowel
Square Leg
Power Pin
Top Panel
Bottom Panel
Left Side Panel
Right Side Panel
Center Panel
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
Insert Dowel (4) to Panel (G1)(G2)(G3).
Insert Dowel (3)&(4) to Panel (F).
Insert Cam-Lock Nut (7) and Dowel (4) into
Panel (C)(D)(E).
**Arrow on Cam-Lock Nut should be pointing
toward hole.**
Attach Shelf Panel (G) to Panel (C)&(E).
Attach Panel (F) to Panel (E)&(D).
STEP 3
STEP 1
STEP 2
Screw Cam-Lock Screw (8) into the
pre-drilled holes on Panel (A).
Attach assembled unit to Panel (A) and
tighten Cam-Lock Nut( 7) using screwdriver.
STEP 5
STEP 4
F
GG
H
1pc
3pcs
2pcs
Short Shelf Panel
Long Shelf Panel
(G1)(G2)(G3)
Back Panel
7
8
6pcs
4pcs
6pcs
9
Cam-Lock Nut
Cam-Lock Screw
Bin
(4)x2pcs
No Hardware List Qty No QtyParts List
(8)x6pcs