Furinno 11180 User manual

Assembly Instruction
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
5.1 Install Nail Leg(3) to the bottom of
Panel(C) using hammer.
5.2 Upright the unit.
STEP 5
Attach Panel(B)to Panel(C)and tighten it
using Screw(1).
STEP 4
Recommended Maximum Weight
Furinno Simple Design End/SideTable
1118020140430
MODEL : 11180
20”(W) x 19.6”(H) x 20”(D)DIMENSION :
15
*Unit in Pound(lbs)
(3)x4pcs
10
(1)x8pcs
Tools RequiredNo Tools Required
Recomm. 1 PersonRecomm. 2 Person
Approx. 5 minutesApprox. 10 minutesApprox. 15 minutesApprox. 30 minutes

STEP 2
Screw Cam-Lock Screw(5)into pre-drilled
holes on Panel(A).
Attach Panel(C)to Panel(A)and tighten
Cam-Lock Nut(4)using screwdriver.
STEP 3
STEP 1
1.1 Insert Dowel(2)to Panel(C).
1.2 Insert Cam-Lock Nut(4)into Panel(C).
Note: Arrow on Cam-Lock Nut(4)should be
poiting towards hole.
(C)x4pcs
(4)x1pcs
(2)x2pcs
(5)x4pcs
unfinished surface
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
8pcs
8pcs
4pcs
A 1pcs
Top Panel
Nail Leg
No Hardware List Qty No QtyParts List
Chipboard Screw
Plastic Dowel
4
5
4pcs
4pcs
Cam-Lock Nut
Cam-Lock Screw
B
C
1pcs
4pcs
Leg Panel
Shelf Panel