Furinno 11192 User manual

Assembly Instruction
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
7.1 Attach Panel (G) to Panel (A) using Screw (1).
7.2 Attach Panel (D) to Panel (G) and tighten
Cam-Lock (9) using screwdriver.
7.3 Tighten Top Cap (7) to Pole (5).
STEP 7
5.1 Attach Panel (E) to Panel (C) using Screw (1).
5.2 Fix Leg (6) to the bottom of Panel (E) and
tighten it to Long Pole(4).
STEP 5
6.1 Attach another Panel (E) to Panel (C) using
Screw (1).
6.2 Attach Short Pole (5) and tighten it.
STEP 6
Recommended Maximum Weight
Furinno Efficient Home Laptop Notebook
Computer Desk
1119220180426
MODEL : 11192
20
*Unit in Pound(lbs)
10
Tools Required
Recomm. 1 Person
(6)x2pcs
(5)x2pcs
(1)x2pcs
(4)x2pcs
(1)x2pcs
(7)x2pcs
(1)x2pcs
Approx. 30 minutes
(5)
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!

STEP 1
Note: Arrow on Cam-Lock Nut (9) should be
pointing towards hole.
4.1 Attach Panel (F)&(H) to Panel (B)&(C) using
Screw (1).
4.2 Install Nail Leg (3) to the bottom of L/R
Side Panel (B)&(C) using rubber mallet.
STEP 4
STEP 3
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
14pcs
4pcs
4pcs
A 1pc
Top Panel
Nail Leg
No Hardware List Qty No QtyParts List
Screw
Dowel
4
5
6
2pcs
2pcs
2pcs
Leg
Long Pole
Short Pole
7
8
9
2pcs
6pcs
6pcs
Cam-Lock Nut
Top Cap
Cam-Lock Screw
B
C
1pc
1pc
Right Side Panel
Left Side Panel
D
E
F
1pc
2pcs
1pc
Back Panel
Side Top Panel
Shelf Panel
G
H
1pc
2pcs
Skirt Panel
Center Panel
STEP 2
Screw Cam-Lock Screw (8) into the pre-drilled
holes on Panel (A)&(D).
1.1 Insert Dowel (2) to Panel (B) &(C).
1.2 Insert Cam-Lock Nut (9) into Panel (B),(C) & (G).
Attach Panel (B)&(C) to Panel (A) and tighten
Cam-Lock Nut (9) using screwdriver.