Furinno 2FR16127 User manual

2FR16127
Furinno 3 Tier Wall Mount Corner Square Shelf (Set of 2)
its Space. its Budget
www.furinno.com
NEED HELP? For help with assembly, or if you are missing a
part, please call Furinno’s Customer Service, 1-773-299-8111
from Mon-Fri, 9am-5pm (CST) or email: [e-mail]
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth.
Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
x 2
15 min
NO HARDWARE LIST
1C/B SCREW M4x32mm
2 SCREW COVER
3WALL PLUG
Tools Required
32pcs
QTY
32pcs
8pcs
PAGE 1/22FR1612720180312
PARTS LIST
NO QTY
A
SHELF PANELB
C
TOP PANEL /
BOTTOM PANEL 4pcs
6pcs
CENTER PANEL 4pcs
B
B
B
A
A
C
C
*All the hardware quantities are for two sets.

PAGE 2/2
ASSEMBLY INSTRUCTION
STEP 1
ATTACH PANELS (A) & (C) TO PANELS (B) USING
SCREWS (1) AND TIGHTEN IT, AS SHOWN.
STEP 2
2.1 PLACE THE ASSEMBLED UNIT TO THE
DESIRED MOUNTING LOCATION AND MARK
THE DRILL POSITIONS ON WALL.
2.2 DRILL HOLES ON EACH MARKED LOCATION
AND INSTALL WALL PLUG (3), AS SHOWN.
STEP 3
3.1 POSITION THE ASSEMBLED UNIT
TO THE WALL PLUG (3) ON WALL
AND TIGHTEN USING SCREW (1).
3.2 ATTACH COVERS (2) TO SCREWS’S
HEAD, AS SHOWN.
x 2
1
STEP 3.1
2
STEP 3.2
x 2
STEP 2.2
1/4" Drill
3
STEP 2.1
*Mark the point
on the wall.
1
STEP 1
B
B
B
A
C
C
A
Finished
Edge
Finished
Surface
Finished
Surface
Finished
Surface
Finished
Surface