Furinno FNBQ-22120 User manual

1
2
3
2pcs
1pcs
1pcs
4
5
6
1pcs
4pcs
2pcs
STEP 1
STEP 2
Tighten
Tighten
No Hardware List Qty
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
Lower Support Pole
Co-Stand
Primary Stand
Rounded Umbrella Support
Upper Support Pole
Umbrella Support
Connect Co-Stand(1)to Primary Stand(2)and tighten it.
Connect Lower Support Pole(3)to Primary Stand(2)and tighten it.
TightenTighten

Assembly Instruction
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Approx. 30 minutes
Recomm. 1 Person
No Tools Required
Install Rounded Umbrella Support(6)to
Upper Support Pole(4)and tighten it.
STEP 4
Install Umbrella Support(5)on Upper Support
Pole(4)and connect to Lower Support Pole(3).
Tighten all parts.
STEP 3
Recommended Maximum Weight
15 Lbs
Furinno Multi-functional Hat and
Coat Stand
FNBQ2212020140401
MODEL : FNBQ-22120
21.7”(W) x 72.8”(H) x 21.7”(D)DIMENSION :
Tighten
pcs
Tighten
Tighten
pcs