Furniture FX NEW ORLEANS User manual

NEW ORLEANS
ASSEMBLY INSTRUCTIONS
Page 1 of 4
HARDWARE IN THIS BOX
Sofa Bed- 1 pc.
Storage- 1 pc.
Arm - 1 pair.
Wood Leg - 4 pcs.
Pillow - 2 pcs.
Styrofoam leveler
- 2 pcs
BOX # 1 OF 2 BOX # 2 OF 2
Bolt A - M8 x 60 mm 6 pcs.
Allen Key C - 1 pc.
Bolt B - M8 x 30 mm 4 pcs.
Washer E - 6 pcs.
QUALITY CONTROL
This string is attached to the
~~HARDWARE PACK~~
Included inside ; a visible confirmation
of hardware being pack in this box
LEFT
LEFT
LEFT
RIGHT LEFT
LEFT
FRONT
RIGHT FRONT
HEAVY WORK !!
3 people required
to perform this exercise
F U R N I T U R E
R
For questions regarding assembly
please call 888-FURNFX-1
or visit www.furniture-fx.com
1. Avoid using sharp object such as a knife
to cut open the interior plastic packing
as you may accidentally damage the sofa fabric.

Page 2 of 4
Diagram 3
Arm
Wood leg
Wood Leg
Arm
Diagram 4
Sofa bed mattress
Diagram 1
Diagram 2 Prefixed bolt
Prefixed nut
Bolt B
3. Attach wood leg to the bottom of the Arm rest . Make sure
the legs are tighten aligned.
Allen key C
Storage
S Metal Bracket
Sofa bed
2. Carefully place the sofa bed on the storage base and attach
S metal bracket to storage base using Bolt B 2 pcs per side as shown
in diagram 2.

Page 3 of 4
Diagram 5 Diagram 6
Styro foam leveler
support
Sofa bed
Arm
Allen key C
Bolt A
Diagram 7
Diagram 8
Support leg
Sofa bed
5. Use the pull-out small leg as shown in
diagram 7 & 8 for support when using
the sofa in the bed position
Washer E
4. Convert sofa bed into sofa position and use leveler
at front and back to level the storage to line up with
the holes in the arm.
Then attach the arms using 6 pcs of Bolt A
and Washer E as shown in diagram 5 and 6.
Repeat the same step to attach the other side
of the arm.

Function B
Diagram 7
1
2
3
Function A Function C
Page 4 of 4
Diagram 8
4. To return the sofa back to the sofa position , Lift the back all the way to
its most up right position until the final clicking position of the sofa
mechanism is heard.
(To repeat steps 2-4) slowly release the back of the sofa back to the bed
position.
5. To open the storage, from sofa position lift up seat deck from front.
Diagram 8.
1. The sofa bed has 3 positions shown in diagram 7. Bed ( 1 ), Lounge ( 2 ), Sofa ( 3 ).
2. To convert sofa bed to its desired positions stand in the middle at the back .
Push the back section forward slowly to release the mechanism. Gently guide the
back down to the bed position.
3. To convert the sofa to lounge position stand in the middle at the back of the sofa
bed and simply lift the back up to the desired position. Make sure that the two sides
of the locking mechanism lock at the same angle.
Storage