Furniture FX VANCOUVER User manual

VANCOUVER
ASSEMBLY INSTRUCTIONS
1. Avoid using sharp object such as a knife to cut open
the bubble wrap packing as you may accidentally
damage the sofa fabric.
2. The sofa bed frame is pre-assembled to the sofa.
Fix the four legs to the frame as shown in diagram 1.
3. Allign both the JCBC Bolt and on the pre-fixed
threaded metal plate before securing the bolt firmly.
4. Thread in all the bolts through the holes as shown
in diagram 2.
Do not over tighten.
Diagram 1
Page 1 of 2
F U R N I T U R E
R
For questions regarding assembly
please call 888-FURNFX-1
or visit www.furniture-fx.com
Front Leg
Allen key
JCBC
Sofa Bed
Diagram 2
Back Leg Allen key
JCBC
Sofa Bed
Diagram 3
PARTS IN THIS BOX HARDWARE IN THIS BOX
Back Leg- 2 pcs.
Allen Key- 1 pc. JCBC- 6 pcs.
Sofa Bed- 1 pcs.
Front Leg
- 2 pcs.
QUALITY CONTROL
This string is attached to the
~~HARDWARE PACK~~
Included inside ; a visible confirmation
of hardware being pack in this box

Function B
Diagram 4
1. The sofa bed has 3 positions shown in diagram 4.
2. Stand in the middle at the back to the required positions and secure it in the place
by listening to the clicking sound of the mechanism in the sofa. Make sure that the
two sides of the locking mechanism lock at the same angle
Function A Function C
Page 2 of 2
3. For back to bed conversion, stand in the middle at the back of the
sofa bed and simply lift the back up all the way to the end until
the final clicking position of the sofa mechanism is heard and slowly
release it back to the bed position
1
2
3