Furniture of America CM-3564BC-2PK User manual

CM-3564BC-2PK
Rev: 18-01-17
For more information contact our team: [email protected]

Align and attach the front stretcher (#4) to the gaps of the front legs (#3R/L).
Make sure holes of front stretcher (#4) is facing
where the arrow is pointing.
Prepare 4 bolts assembly by inserting lock washer (#E), then flat
washer (#D) onto bolts (#C). Insert front legs (#3R/L) to the holes of
the seat cushion (#2). Secure with bolts (#C).
Insert wood dowel (#G) to the middle hole of the seat cushion (#2).

1) Prepare 2 bolts assembly by inserting lock washer
(#D), then flat washer (#E) onto bolts (#C). Align
holes of the seat cushion (#2) to the holes of the chair
back (#1). Secure middle holes with bolts (#C), but do
not fully tighten.
2) Prepare 4 bolts assembly by inserting lock
washer (#D), then flat washer (#E) onto bolts (#B).
Secure corner holes of the seat cushion (#2) with
bolts (#B), but do not fully tighten.
3) Align and insert stretchers (#5,6) to the gaps of the legs (#3R/L) and chair
back (#1). Make sure holes of the stretchers (#5,6) and facing down when chair
is flipped upright..
Secure all stretchers (#4,5,6) with screws (#F).