Furniture of America Silvia CM3803PC-2PK User manual

Align a leg (#2) to each side of the leg frame (#1), then insert
2 bolts (#A) into each end. Secure using the Allen wrench (#D).
Align the holes along the bottom ring (#3) to the
holes along the legs, then insert a bolt (#B) into
each hole and secure using the Allen wrench (#D).

Align the holes along the center ring (#4) to the holes
along the outer part of the legs, then insert a bolt (#B)
into each hole and secure using the Allen wrench (#D).
1. Place the seat (#5) face down, then align the metal plate
and pole (#6) to the holes along the bottom of the seat.
2. Insert a bolt (#B) into each
hole and secure using the
Allen wrench (#D).

Place the leg frame upright, then insert the metal pole
(#6) into the top center hole. Turn right to tighten.
Place a flat washer (#C) onto the bolt
(#A) then insert the bolt assembly into
the hole at the end of the metal pole
(#6). Secure using the Allen wrench.
ASSEMBLY IS COMPLETED