Furniture of America CM-OS2501 User manual

Adjust Leg
#6 x 3pcs
#7 x 3pcs
Seat Cushion
Back Cushion
Bolt 1/4" x 1-3/8"
Bolt 1/4" x 5/8"
#B x 2pcs
#5 x 1pc
#D x 4pcs
#C x 8pcs
Small Flat Washer
Big Flat Washer
#E x 4pcs

#D
#E
#E
#D x 4pcs
1. Align each end of the seat
(#4) to the holes along the
sides of the right and left
support frames (#1,2).
2. Insert a bolt (#A) with a Big flat washer
(#C) into each hole from within the seat
(#4). Secure using the Allen wrench (#E).
1. Align each end of the backrest
(#3) to the holes along the
sides of the right and left
support frames (#1,2).
2. Insert a bolt (#A) with a Small flat washer
(#D) into each hole from within(#3) and
secure using the Allen wrench (#E).
Note: Left and right is determined
by facing the front of the bench
in its upright position.

#B 2
2
#6
#7 #7
#6
#7
#6
#E
#C
#B
#5
Align the leg (#5) to the center
hole along the bottom center
of the bench. Insert a bolt (#B)
with Big flat washer (#C) into
the hole, then secure using
the Allen wrench (#E).
Place the seat cushions (#6) and back cushions (#7) onto the bench.