Furniture Values International aspenhome I39-300T User manual

2-27-20 6
Page /4
ITEM NO: I39-300T 75" Exec Desk Top
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
UNIT SHOULD BE INSTALLED BY 2 OR MORE PERSONS.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
HARDWARE LIST: I39-300T
No. Description Sketch Quantity
A Bolt Ø/4"*-/2" 7 PCS
B Lock Washer Ø/4" 7 PCS
C Flat Washer Ø/4" *3/4" 7 PCS
D Allen Wrench 4MM PC
COMPONENTS LIST: I39-300T
No. Description Sketch Quantity
Desk Top PC
2 Mounting Plate PC
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
FOR INDOOR USE ONLY
I39-300B 75" Exec Desk Bottom
I39-300T
I39-300B
COMPONENTS LIST: I39-300B
No. Description Sketch Quantity
Left pedestal PC
2 Right Pedestal PC
3 Modesty Panel PC

2-27-20 6
Page 2/4
ITEM NO: I39-300T 75" Exec Desk Top
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
I39-300B 75" Exec Desk Bottom
STEP :Remove the drawers from the pedestals: Fully extend the drawer, then press the plastic tab down on the right
and up on the left at the same time as shown below. While holding the tabs pressed down/up, pull the drawer out.
Plastic Tab
STEP 2:Attach the modesty panel to left
pedestal and right pedestal by using 6 bolts(A),
lock washers(B) and flat washers(C). Do not
completely tighten bolts to allow some leeway
for adjustment in STEP 3.
ABC
D
STEP 3:Put desk top on pedestals and modesty panel, attach the pedestals and modesty panel to the desk top by using
bolts(A), lock washers(B), flat washers(C). Completely tighten all bolts used in Steps 2 and 3. Save extra hardware
for optional swivel keyboard.
STEP 4: Replace all of the drawers in pedestals: Fully extend
the slides from the case. Then align the slides on the drawer to
the slides on the case as shown. Push the drawer back in. You
may have to slide the drawer in and out several times in order
to properly align the ball bearings.
A
B
C
D
Left pedestal
Right Pedestal
Modesty Panel
Desk Top
Left pedestal
Right Pedestal

2-27-20 6
Page 3/4
ITEM NO: I39-300T 75" Exec Desk Top
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
I39-300B 75" Exec Desk Bottom
FUNCTIONALITY INSTRUCTION
Convertible keyboard/Pencil
drawer
Flip down keyboard tray with
2 AC outlet Power Pack
Locking file drawers hold
letter or legal size files
Adjust the leveler
when necessary
Leveler on base
Flip down tray with 2 AC
outlet / 2 USB power pack
Remove the wood screws on the
side of drawer box to remove the
rod loops and file rods if necessary.
Keys for file lock.
Do not trash.
Pull-out panel

2-27-20 6
Page 4/4
ITEM NO: I39-300T 75" Exec Desk Top
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
I39-300B 75" Exec Desk Bottom
To use a Typical Swivel Keyboard instead of the pencil drawer, please follow the procedure below.
STEP : Take the middle drawer off. Remove 8 bolts,
lock washers and flat washers from drawer frame to
the desk top. Take the drawer frame off. (Please keep
the hardware that will be used on STEP 3.)
Typical Swivel
Keyboard
Mounting Plate
STEP 2: Attach Typical Swivel Keyboard to Mounting Plate
by using 4 bolts, lock washers, flat washers and nuts. Using
open wrench tighten all these bolts. (This hardware is
included with Keyboard)
STEP 3: Attach Mounting Plate with Typical Swivel
Keyboard to desk top by using 4 bolts, lock washers, flat
washers. Tighten all bolts. (This hardware is from STEP )
A
B
C
D