Furrion DV5700 User manual

DVD Stereo
180W/CD/DVD/Radio/MP3
USB/AUX-IN
Subwoofer Out/Bluetooth
DV5700
INSTRUCTION MANUAL
13 12
22
114 15 16 17 238 9
1110 3 2 6 7 20 519 21
(1-6)
4
18

IM-DV5700-Rev5.0 - PAGE 1
WELCOME
Thank you for purchasing this Furrion®DVD Stereo. Before operating your new appliance, please
read these instructions carefully. This instruction manual contains information for safe use, installation
and maintenance of the appliance.
Please keep this instruction manual in a safe place for future reference. This will ensure safe use and
reduce the risk of injury. Be sure to pass on this manual to new owners of this appliance.
The manufacturer does not accept responsibility for any damages due to not observing these
instructions.
If you have any further questions regarding our products, please contact us at [e-mail]

IM-DV5700-Rev5.0 - PAGE 2
BEFORE YOU BEGIN
PRECAUTIONS:
CAUTION:
USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
• Keepthismanualhandyasareferenceforoperatingproceduresandprecautions.
• Alwayskeepthevolumelowenoughsoyoucanhearsoundsoutsideofthecar.
• Protectthisproductfrommoisture.
• Ifthebatteryisdisconnectedordischarged,thepresetmemorywillbeerasedandmustbe
reprogrammed.
FEATURES:
DVD
SupportedDVD-video,DVD+/-R,DVD+/-RWandDVD+/-DL.
VCD
SupportedVCDfeaturingPBC(playbackcontrol).
CD
SupportedCD,CD-RandCD-RW.
TV System
ThisunitisPAL/NTSCsystemcompatible.Whenconnectingothercomponentstothisunit,be
surecomponentsarecompatiblewiththesamevideosystemorelseimageswillnotbecorrectly
reproduced.
Aspect Ratio Selection
Switchingbetweenwidescreen,letterboxandpanscandisplayispossible.
Audio Selection
YoucanswitchbetweenmultipleaudiosystemsrecordedonaDVDasdesired.
Subtitle Selection
YoucanswitchbetweenmultiplesubtitlelanguagesrecordedonaDVDasdesired.
When an operation is prohibited
WhenyouarewatchingaDVDandattempttoperformanoperation,itmaynotbesupportedby
theprogrammingonthedisc.Whenthishappens,thisunitindicatesonthescreen.

IM-DV5700-Rev5.0 - PAGE 3
INSTALLATION GUIDE
Location
• Choose a mounting location away from humid areas, water sources, appliances or any equipment
that can radiate heat.
• Select an area on a wall or cabinet which is free from cable, fuel or brake lines and ensure that area
behind the wall mount stereo has a vent hole or if it is an enclosed box and has adequate room
around the rear of the unit for cooling.
• Ensure when the stereo is mounted in the cut out that the wires at the rear of the unit are not pressed
against the heat sink.
Installing the unit
• Before installing the unit, connect the wiring temporarily and make sure the unit and the
system work properly.
• Fix the unit with screws according to following diagram.
TO SUPPORT THE UNIT
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being stolen.
4
1
5
7
9
6
8
7
8
9
10
8
9
2
3
4
2
1. UNIT (included)
2. MOUNTING BRACKET (included)
3. MOUNTING SCREW CM5X8mm x 4PCS
(included)
4. MOUNTING SCREW PA5X16mm x 4PCS
(included)
5. TRIM COVER (included)
6. REAR SUPPORT STRAP (included)
7. HEX NUT (included)
8. LOCK WASHER (included)
9. PLAIN WASHER (included)
10. TAPPING SCREW PA5X16mm
(included)
2
1
43
182.6mm
51mm
194.6mm
32.7mm
9.15mm
Release screw
Use only screwdriver with
appropriate torque, any other tools or excess torque will
damage the deck mechanism at users’ responsibility.
Recommended
cutout

IM-DV5700-Rev5.0 - PAGE 4
FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL
Before detaching the front panel, be sure to press the button to turn OFF the unit
Then press the Release button detach the panel by pulling it towards you as illustrated.
Notes:
• Do not press the front panel hard against the unit when attaching it. It can be easily attached by
pressing it lightly against the unit.
• Do not press hard or give excessive pressure to the LCD display of the front panel when attaching
it to the unit.
CLEANING THE CONNECTOR
The unit may not function properly if the connectors between the unit and
the front panel are contaminated with dirt. In order to prevent this from
happening, detach the front panel by pressing the button and clean the
connector from time to time.
Clean the connector with a cotton swab together with contact cleaner(not
included.) as illustrated. Be sure to clean them carefully pin by pin and make
sure not to damage the connecting points.
WIRE CONNECTION GUIDE
Audio Output:
Left (White) and Right (Red)
Audio Input:
Left (White) and Right (Red)
Subwoofer Output: Green
Video Output: Yellow
Connect to external A/V system to display
Bluetooth Antenna: Black
Note: Red Wire must be connected
by car ignition key in order to avoid
the car battery being drained when
the car will be not used for long
period.
Maintenance
FUSE REPLACEMENT
If the fuse blows, check the power connection and
replace the fuse. If the fuse blows again after the
replacement, there may be an internal malfunction.
In this case, consult your nearest repair center.
Warning
Use the fuse amperes for each lead. Use
of a higher fuse amperes may cause serious damage.
Cotton Swab
Rear of front panel
Main unit
15° 15°
15° 15°
R(RED)
AUDIO OUTPUTAUDIO INPUT
L(WHITE)
VIDEO OUTPUT (YELLOW) SUBWOOFER OUTPUT
(GREEN)
ANTENNA
CONNECTOR
FUSE 10A
MEMORY B+
GROUND
AUTO ANTENNA
IGNITION SWITCH
YELLOW
BLACK
BLUE
RED
PURPLE(+)
PURPLE/BLACK(-)
GREEN(+)
GREEN/BLACK(-)
WHITE(+)
WHITE/BLACK(-)
GREY(+)
GREY/BLACK(-)
REAR RIGHT
SPEAKER
REAR LEFT
SPEAKER
FRONT LEFT
SPEAKER
FRONT RIGHT
SPEAKER
BLUETOOTH ANTENNA

IM-DV5700-Rev5.0 - PAGE 5
1. POWERON/OFF( )/MUTEBUTTON
2. SELECTFUNCTIONBUTTON(SEL)
3. VOLUMEKNOB
4. PRESETSTATIONS(1,2,3,4,5,6)BUTTON
5. BAND/LOUDNESSBUTTON
6. MODE/SUBWOOFERBUTTON(MODE)
7. AUTOSEEK/PRESETSCANBUTTON(AS/PS)
8. PREVIOUS/NEXTTRACK/CHAPTERBUTTON( /)
9. AUTOSEEKTUNINGBUTTON
10.FRONTPANELRELEASEBUTTON( )
11.LCDDISPLAY
12.DISCEJECTBUTTON( )
13.DISCSLOT
14.PLAY/PAUSEBUTTON
15.INTROBUTTON(INT)
16.REPEATBUTTON(RPT)
17.RANDOMBUTTON(RDM)
18.SEARCHPREVIOUS/NEXTFOLDERBUTTON( /)
19.ANSWERBUTTON( )
20.HANGUPBUTTON( )
21. USB PORT
22.MEMORYCARDSLOT(SD/MMC)
23. AUX IN
Locations of Parts (Main unit)
13 12
22
114 15 16 17 238 9
1110 3 2 6 7 20 519 21
(1-6)
4
18
13 12
22
114 15 16 17 238 9
1110 3 2 6 7 20 519 21
(1-6)
4
18
13 12
22
114 15 16 17 238 9
1110 3 2 6 7 20 519 21
(1-6)
4
18

IM-DV5700-Rev5.0 - PAGE 6
Locations of Parts (Remote Control)
1. POWERON/OFF
2. MODE
3. PLAY/PAUSE
4. TITLE/PLAYBACKCONTROL(PBC)
5. SELECT(SEL)
6. SEEK+/SEEK-/PREVIOUS/NEXTTRACK/CHAPTER
7. VOL+/VOL-
8. GOTO
9. AUDIO
10. OK
11. UP/DOWN/LEFT/RIGHT
12. REPEAT/AUTOSEEK/PRESETSCAN
13. RANDOM/BAND/LOUDNESS
14. INTRO
15. SYSTEM(PAL/NTSC)
16. SUBTITLE
17. SETUP
18. EQUALIZER/ANGLE
19. SLOWMOTION
20. A-BREPEAT/ZOOM
21. STOP
22. CLOCK/ONSCREENDISPLAY
23. MUTE
24. MAIN MENU
25. STEP(FRAMEBYFRAMEPLAYBACK)
26. PREVIOUS/NEXTFOLDER
27. TWODIGITTRACKSSEARCHS
28. PHONE NUMBER
29. ANSWER
30. HANG UP
Use and care of the remote control
Installing the battery
Slidethetrayoutonthebackoftheremotecontrolandinsertthebatterywiththeplus(+)
andminus(-)polespointingintheproperdirection.
• Whenusingforthersttime,pulloutthelmprotrudingfromthetray.
CAUTIONS
• Removethebatteryiftheremotecontrolisnotusedforamonthorlonger.
• Donotrecharge,disassemble,heatordisposeofthebatteryinare.
• Donotstorethebatterywithmetallicmaterials.
• Intheeventofbatteryleakage,wipetheremotecontrolcompletelycleanandinstallanewbattery
• When disposing of used batteries, please comply with government regulations or environmental public
institution’srulethatapplyinyourcountry/area.
• Alwayscheckcarefullythatyouareloadingthebatterywithplus(+)andminus(-)polesfacingtheproper
directions.
Using the remote control
Pointtheremotecontrolinthedirectionofthefrontpaneltooperate.
IMPORTANT
• Donotstoretheremotecontrolinhightemperaturesordirectsunlight.
•
Donotlettheremotecontrolfallontotheoor,whereitmaybecomejammedunderthebrakeoracceleratorpedal.
1
82017 4
2 3 23
3028 29
24
10
11
21
12
13
25
19
15
26
7
6
18
16
9
22
14
5
27
WARNING
Donotingestthebattery,ChemicalBurnHazard
(Theremotecontrolsuppliedwith)Thisproductcontainsacoin/buttoncellbattery.Ifthecoin/buttoncell
batteryisswallowed,itcancausesevereinternalburnsinjust2hoursandcanleadtodeath.
Keepnewandusedbatteriesawayfromchildren.
Ifthebatterycompartmentdoesnotclosesecurely,stopusingtheproductandkeepitawayfromchildren.
Ifyouthinkbatteriesmighthavebeenswallowedorplacedinsideanypartofthebody,seekimmediate
medicalattention.

IM-DV5700-Rev5.0 - PAGE 7
GENERAL OPERATIONS
Turning the unit ON/OFF ( )
Press “ ” button to turn on unit. To turn off, press and hold this button for 2 seconds.
Selecting a source (MODE)
Press MODE repeatedly to switch between TUNER, DISC, USB, SD, Bluetooth and AV IN mode.
Loading a disc
Make sure power is turned ON before inserting a disc.
1. Press to open the front panel
2. Insert a disc into the disc slot
Ejecting a disc
Make sure power is turned ON before ejecting a disc. Press button to eject disc.
Adjusting Volume/Bass/Treble/Balance/Fader
• Unit: Turning the VOL knob Right or Left. Increase or decrease the volume by turning
VOL
VOL
or .
VOL
VOL
Press the SEL button until the BASS, TREBLE, BALANCE and FADER function.
• Remote Control: Press VOL+ or VOL- to increase or decrease volume.
Further settings via the Select Function Button (SEL)
Press and hold SEL button to adjust EQ/LOUD/STEREO/LOCAL:
2 sec.
SEL LOC
SEL STEREO
LOUD
SEL
EQ
SEL
EQ CONTROLS
Turn VOL knob to select FLAT/CLASS/ROCK/CINEMA.
LOUDNESS
Turn VOL knob to select LOUD ON/OFF.
STEREO/MONO
Turn VOL knob to select STEREO/MONO.
When reception of an FM station is weak, listening quality
can be improved by switching to mono sound
.
LOCAL/DX
Turn VOL knob to select LOCAL/DX. At LOCAL the LCD Display shows LOC ON, at DX(Distant)
the LCD Display shows LOC OFF. “Local” position in areas with strong signals to let radio stop at
only strong stations during manual tuning (LOC appears). Press to Distant position in areas with
weak signals to listen to all stations.
Mute
• Unit: Press “/MUTE”button once to mute the sound, press again to resume.
• Remote Control: Press button to mute the sound at once. Press again to return to previous
volume level.
Loudness
• Unit: Press and hold BAND/LOUD button to turn on/off LOUDNESS feature.
• Remote Control : Press and hold LD button on remote control to turn on/off LOUDNESS feature.
Equalizer
Remote: Press EQ button. Press EQ again or ( / ) button to select between Flat/Classic/
Cinema/Rock/EQ Off equalize modes.
Subwoofer
• Unit:Press and hold MODE button to turn on/off subwoofer.

IM-DV5700-Rev5.0 - PAGE 8
Clock Setting (only Radio mode)
1. Press CLK button on remote control.
2. Press and hold CLK button again.
3. Turn VOL knob on unit to adjust hours. Press CLK button and Turn VOL button on unit to adjust
minutes.
4. Press OK button on remote control.
LISTENING TO RADIO
Band
Press BAND button on unit or BD button on remote control repeatedly will toggle cyclically between
each band. FM1--FM2--FM3--AM1--AM2.
Automatic or Manual tuning ( / )
MANUAL TUNING: Press and hold /button 2 sec. until MANUAL show on the display.
Press /button to adjust by channel step frequency.
AUTOMATIC TUNING: Press /button are operated as auto seek tuning.
Auto Seek/Preset scan (AS/PS)
Preset Scan - By pressing AS/PS button shortly, the radio plays each preset station for 5 seconds.
Auto Seek - By pressing AS/PS button longer than 1 sec, auto seek is activated. The strong stations
are preset and stored in the corresponding preset number. When Auto Seek operation is
the radio executes the preset scan.
Storing and Recalling Frequencies
If you press any of the NUMBER (1-6) you can easily store up to six broadcast frequencies for
later recall with the touch of a button.
1. Choose a desired BAND.
2. When you a frequency that you want to store in memory, press a NUMBER(1-6) and hold
until the preset number shows and lit in the display.
3. The selected radio station frequency has been stored in memory. The next time you press the
same NUMBER (1-6) the radio station frequency is recalled from memory.
Note: Up to 6 stations can be stored in each band.
Switching between USA/AUSTRALIA frequency tuning
How to switch between the two frequencies.
1. IIn Radio mode, press and hold (BAND/LOUD) button for 2 seconds. Immediately follow by press
to change USA/Australia frequency.
2. Turn power OFF and ON again.
3. In radio mode, tune to any station using MANUAL tune mode, you will notice that the channel
step has change.
Note: Default setting is set to USA frequency.
PHOTO Viewing:
Unit:
Files search for stop mode:
1. Press AS/PS button to stop any playback.
2. Press /button to select “photo” listed.
3. Rotate volume knob to select *.JPG to view or press SEL button to start play from
photo.
4. Press for next photo.
5. Press for previous photo.
6. Press 3 RPT button repeatedly to select Rep-1/Rep DIR/Rep ALL repeatedly playback until
press [A/PS] button.

IM-DV5700-Rev5.0 - PAGE 9
Remote control:
Files search for stop mode:
1. PressSTOP button to stop any playback.
2. Press ( ) button repeatedly to select “photo” listed.
3. Press ( , ) button to select desired folder then press OK button to
4. Press ( , ) button to select desired JPG then press OK button to start playback photo.
5. Press SEEK+ for next photo.
6. Press SEEK- for previous photo.
7. Press RPT button repeatedly to select Rep-1/Rep DIR/Rep ALL repeatedly playback until
press STOP button.
CD/MP3/WMA Music listening:
Unit:
Files search for stop mode:
1. Press AS/PS button to select media.
2. Press /button to select “MUSIC” listed.
3. Rotate volume knob to select desired folder.
4. Rotate volume knob to select music and press SEL button to playback or press SEL button
to start play from
5. Press for next
6. Press for previous
7. Press 1button for pause, press again for resume playback.
8. CD playback only: Press INT button to select INTRO or SEQ play, you can select INTRO to
introducing play each 10sec.
9. Press 3 RPT button repeatedly to select Rep-1/Rep DIR(MP3/WMA only)/Rep ALL/Rep OFF
to repeatedly playback.
10.Press 4 RDM button to select RANDOM ON/OFF to random playback.
Remote control:
Files search for stop mode:
1. Press STOP button to stop any playback.
2. Press ( ) button repeatedly to select “MUSIC” listed.
3. Press ( , ) button to select desired folder then press OK button to
4. Press ( , ) button to select desired then press OK button to start playback music.
5. Press SEEK+ for next
6. Press SEEK- for previous
7. Press button for pause, press again for resume playback.
8. CD playback only: Press INT button to select INTRO or SEQ play, you can select INTRO to
play each for 10 sec.
9. Press RPT button repeatedly to select Rep-1/ Rep DIR(MP3/WMA only)/Rep ALL/Rep OFF
repeatedly playback.
10.Press RDM button to select RANDOM ON/OFF to random playback.
Movie Playback:
Unit
Files search for stop mode:
1. Press AS/PS button to stop any playback.
2. Press /button to select “Video” listed .
3. Rotate volume knob to select movie to playback or press SEL button to start play from
4. Press for next
5. Press for previous
6. Press 3 RPT button repeatedly to select Rep-1/Rep DIR/Rep ALL/Rep OFF repeatedly
playback until press AS/PS button.

IM-DV5700-Rev5.0 - PAGE 10
Remote control:
Files search for stop mode:
1. Press Stop button to stop any playback.
2. Press ( ) button repeatedly to select “Video” listed.
3. Press ( , ) button to select desired folder then press OK to
4. Press ( , ) button to select desired movie then press OK button to start playback.
5. Press SEEK+ for next
6. Press SEEK- for previous
7. Press RPT button repeatedly to select Rep-1/Rep DIR/Rep ALL/Rep OFF repeatedly playback
until the STOP button is pressed.
Stopping Playback
1. Press STOP on remote control during playback to stop playback. That position is stored in
memory.
2. Press to continue. Playback starts from the track at which it was stopped.
Fast Forward / Fast Reverse
1. During playback, press and hold or . Unit scans at the speed of x2 - x4 - x8 - x16 - x20.
2. To resume normal playback at a desired point, press .
Note: No sound is come out during fast forward/fast reverse at over x2 high speed search.
Finding the Beginning of Tracks
During playback, press or .
: Press to start playback from the beginning of the previous chapter or track.
: Press to start playback from the beginning of the following chapter or track.
Pause Playback
During playback, press . Press again to resume playback.
A-B Repeat Playback
This feature allows you to loop playback a section of the movie/audio starting from Point A to B.
1. Press the button to play the movie/audio.
2. Once you have located the section you wish to playback on loop repeat, press and hold
Remote’s A-B button. You will see “REPEAT A-” on the screen.
3. Let the movie/audio play on until you have reached the end of the section you wish to watch on
continuous loop. Once you have reached this point, press and hold remote’s A-B button again.
“REPEAT A-B” will appear on your screen. Playback will now start from Point A –B.
4. To stop A-B repeat playback, press and hold remote’s A-B button once more until “A-B CANCEL”
disappears and normal playback resumes.
During playback, you can see all information and current play settings. Display will show related,
elapse time, title number, chapter number and other information.
Press OSD on the remote control once. Unit will display the disc elapse time.
USB / MEMORY CARD (SD/MMC) / AUX-IN PLAYBACK
AUX IN
An external AV source (e.g. portable MP3 player) can be connected to the AUX IN
socket to be played back by the vehicle loudspeakers.
1. Connect the AUX-IN socket with the AV output of the external device.
USB/Memory Card (SD/MMC)
The device is equipped with a USB interface and a memory card reader for SD/
MMC cards. MP3/WMA/AVI stored on these media types can be played.
AUX IN
USB PORT

IM-DV5700-Rev5.0 - PAGE 11
Note:
-
Due to the great variety of devices with USB and SD/MMC card interfaces that sometimes have
all operational functions will be available with this device.
- You cannot operate USB hard drives on the device.
-
read.
1. Plug your USB storage medium into the USB port.
2. If you use a memory card, insert it into the memory card reader.
3.
The player automatically switches to the input used and starts playback.
4. See the section on operations common for audio / video on how to control USB or memory
card playback.
15° 15°
DVD/VCD PLAYBACK
Playback
1. Insert a disc. When the disc offers a menu, the menu is displayed. When a disc is already
inserted,
press MODE to switch to disc mode.
2. On DVD and VCD with playback control (PBC), menu screens may appear automatically. If this
happens, perform the operation described below to start playback.
CAUTION: Make sure that the TV system settings is set correctly according to the disc that is
playing. If you are not sure, leave it set to “Auto”. Improper setup of TV system might cause the
video to stop/skip/pause playing although audio might continue to play. You can setup TV settings
using the SETUP feature of the remote control. Refer to “SETTING UP THE DVD PLAYER” section.
DVD menu
Press , , , to select the desired item, then press OK.
VCD menu
Use the number keys (“0” to “9”) to select the desired number. The menu screen does not appear
when the PBC function is turned off. In this case, press and hold button to turn on PBC feature.
Turning PBC ON/OFF (VCD only)
PBC (Playback Control) is a feature found on VCD 2.0 and SVCD 1.0. PBC allows control of the
playback of play items and the possibility of interaction with the user through the remote control
or some other input device available. If it’s on, the player won’t auto start after inserting the disc
because it will take time to select program on disc; if it’s off, the player will auto playback the
program on disc one by one.
1. To turn ON PBC function, press PBC on the remote control. To turn OFF, press the button again.
Note:
• Not all VCD/SVCD disc have PBC functions.
• While playing VCD and PBC function is turned ON, Repeat / Intro / Random function will not
work.
Repeat Playback
FOR VCD
1. Press RPT on the remote control during playback.
2. Every time you press this button, the unit switches to the following settings:
Repeat 1 – Repeat the current playback track.
Repeat Off – Turn OFF repeat function.
Note: PBC feature in VCD disc needs to be STOP in order to use Repeat playback.

IM-DV5700-Rev5.0 - PAGE 12
FOR DVD
You can choose between repeat playback of a title or chapter.
1. Press RPT on the remote control during playback.
2. Every time you press this button, the unit switches to the following settings:
Repeat Title – Repeat the current playback title.
Repeat Chapter – Repeat the current playback chapter.
Repeat Off – Turn OFF repeat function.
Searching for particular track using GOTO
You can use the GOTO function to search for a desired track number or particular point of a track to play.
1. Press GOTO button on the remote control during playback. Press or button to select Title/
Chapter, Time serach appears.
2.
Enter Title/Chapter for currently playback disc. press enter to
3. If you want to search by time, enter the time, minute and second then press enter to
Changing audio language during playback (Multi-audio)
Some DVD can provide audio playback with different languages and different systems (Dolby
Digital... etc.). With DVD featuring multi-audio recordings, you can switch between languages/
audio systems during playback.
VCD can provide different audio languages usually divided into left and right channels.
1. To choose different audio, simply press AUDIO button on the remote control repeatedly during
playback.
Note:
• With some DVDs, switching between languages/audio systems may only be possible using a
menu display.
• You can also switch between languages/audio systems using SET-UP MENU or tap the screen
then press Audio
Changing the subtitle language during playback (Multi-subtitle)
With DVDs featuring multi-subtitle recordings, you can switch between subtitle languages during
playback.
1. Press SUBT button on the remote control during playback. Press repeatedly until the supported
desired subtitle appears.
Note:
• With some DVDs, switching between subtitles may only be possible using a menu display.
• You can also switch between subtitles using SET-UP MENU or tap the screen then press
Subtitle.
Changing the viewing angle during playback (Multi-angle) – (DVD only)
With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, you can switch
among viewing angles during play-back.
1. Press and hold ANGLE button on the remote control during playback of a scene. Press ANGLE
button repeatedly to select the desired angle to play.
Title (DVD only)
During DVD playback, Press TITLE button on remote control to return to FIRST title.
Return to Root Menu (DVD only)
During DVD playback, press MENU button to return to root menu.
Note: Some DVDs may not contain root menu.
Slow motion playback
This feature lets you slow down playback.
1. Press SLOW button on the remote control during playback.
2. Pressing it repeatedly will switch you to the following steps: 1/2 - 1/ 3 - 1/4 - 1/5 - 1/6 - 1/7.

IM-DV5700-Rev5.0 - PAGE 13
Note:
• To resume normal playback, press PLAY/PAUSE ( ).
• There is no sound during slow motion playback.
• With some disc, slow motion may be unclear during slow motion playback.
Zooming in During Playback
You can zoom in into the picture during playback.
1. Press ZOOM button on the remote control during playback.
2. Every time you press this button, the unit will zoom 2 - 3 - 4 - 1/2 - 1/3 - 1/4 times and OFF.
STEP (Frame by frame playback)
This lets you move ahead one frame at a time during playback.
Each time you press step button on remote control, you move ahead on frame. To return to normal
playback, press button.
PAL / NTSC
Press and hold SYS button to switch between PAL, NTSC system.
Return / Go Back
Press MENU button on remote control to go back one level or return to previous menu.
CUSTOMIZING SOUND SETTINGS
1. Press SEL button to enter AUDIO setup. Selected item will be highlighted. You can set BASS,
TREBLE, BALANCE, FADER.
2. Rotate VOL knob to make adjustments.
3. Press SEL button to select BASS,TREBLE,BALANCE,FADER and exit settings.
SETTING THE DVD PLAYER
You can customize the unit to suit your preference. You can set the language and other
video and audio settings so when playback starts it will always use your preferred settings.
Important:
1. Play any video before you can access the setup.
2. Press SETUP button on the remote control.
3. Used , , , to select DVD to return/enter setup category.
Settings
SYSTEM SETUP
LANGUAGE SETUP
VIDEO SETUP
Category
TV SYSTEM
AUTO PLAY
TV TYPE
PASSWORD
RATING
DEFAULT
OSD Language
AUDIO Language
SUBTITLE Language
MENU Language
MPEG4 Language
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
Options
NTSC, PAL, AUTO
ON/OFF
4:3PS, 4:3LB, 16:9
Setup password
Setup rating level
Restore to factory settings
Select preferred options on screen
Select preferred options on screen

IM-DV5700-Rev5.0 - PAGE 14
Note: Reading the above le formats is not guaranteed.
File
Extension
.avi
.divx
.mpg
.dat
.vob
FileExtension
.mp3
.wma
Container
AVI
MPG
DAT
VOB
VideoCodec
DivX3.xx
DivX4.xx
DivX5.xx
DivX6.xx
XviD
MPEG-1
MPEG-1
MPEG-2
MPEG-1
MPEG-2
MPEG-1
MPEG-2
AudioCodec
MP3
WMA
AudioCodec
DolbyDigital(AC3)
WMA/PCM/LPCM
MPEG-Audio
(MP1/MP2/MP3)
LPCM
MPEG-Audio
(MP1/MP2/MP3)
LPCM
MPEG-Audio
(MP1/MP2/MP3)
DolbyDigital(AC3)
Bit Rate
16kbps-320kbps
16kbps-320kbps
Resolution
720x480(30fps)
720x576(30fps)
352x240(30fps)
720x480(30fps)
SamplingRate
8k-48kHz
8k-48kHz
Remark
Remark
WMAonly
supportWMA7/
WMA8/WMA9
(CBR/VBR)
(Onlysupport
353format)
Supported Video Format
Supported Audio Format
Setting Rating Password
1. PressSETUPbuttonontheremotecontrol.
2. UsingNavigationkeysselectSystem Setup > Password andpressOKbutton.
3. Enterthedefaultpassword‘0000’andpressOKbuttontounlockrstandthenenternew4
digitpasswordandpressOKbutton.Theunlocklogowillswitchtolockindicatingpassword
hasbeenset.
Note:
- The default password is ‘0000’.

IM-DV5700-Rev5.0 - PAGE 15
HOW TO USE BLUETOOTH IN YOUR STEREO
Pairing
Before your mobile phone can communicate with the stereo, you must complete the pairing
procedure to connect them together.
1. Press MODE button on main unit/remote control until “BT” or “BT AUDIO” is shown on LCD
Display.
2. Turn on Bluetooth function of your mobile phone, then select “add Bluetooth device” from your
mobile phone; the mobile phone will search any activated Bluetooth devices nearby, select
“Furrion DV5700” and enter Passkey “0000” to connect (refer to manual of your mobile phone
for detail if needed).
3. After this pairing process is successfully completed, connect your mobile phone with the stereo,
a Bluetooth logo will appear on mobile phone’s bar.
Note: “Furrion DV5700” is the Bluetooth device name of this stereo.
Audio Streaming
If your mobile phone supports A2DP the music playback can be streamed to the stereo.
1. Make sure your mobile phone and stereo are properly paired and connected.
2. Play music on your mobile phone.
3. “BT AUDIO” will be shown on LCD Display of stereo, music is streamed to the stereo.
4. You can press or button on main unit to select previous or next in mobile
phone.
Making Call
Important: Before you make a call, make sure your mobile phone and stereo are properly paired
and connected.
1. Press MODEbutton on main unit/remote control until BT or BT AUDIO is shown on LCD Display.
2. Press and hold INT button on main unit/remote control to go to previous menu, then “BT” will
be shown on LCD Display.
3. Press button on main unit to select “DIAL”, press and hold SEL button on main unit/remote
control to enter“KEYPAD”.
4. To make a call via remote control, tap number buttons and press “ ” button on main unit/
remote control to dial.
5. Press “ ” button on main unit/remote control to hang up.
Answering/Rejecting/Hanging Up Call
1. To answer an incoming call, press “ ” button on main unit/remote control. To reject an incoming
call, just press “ ” button on main unit/remote control.
2. After you have hed the conversation, press “ ” button on main unit/remote control to hang
up.
History
History contains the lists of dialed, received and missed calls.
1. Press MODE button on main unit/remote control until “BT” or “BT AUDIO” is shown on LCD
Display.
2. Press and hold INT button on main unit/remote control to go to previous menu, then “BT” will
be shown on LCD Display.
3. Press button on main unit to select “HISTORY”, press and hold SEL button on main unit/
remote control to enter “CALL LOG”.
4. Press or button on main unit to select the number, then press “ ” button on main
unit/remote control to dial.

IM-DV5700-Rev5.0 - PAGE 16
TECHNICAL SPECIFICATIONS
DVD PLAYER SYSTEM
SignaltoNoiseRatio >60dB
ChannelSeparation >50dB(1kHz)
FrequencyResponse 20Hz-20kHz
FM RADIO
FrequencyRange 87.5-107.9MHz(USA)
 87.5-108MHz(AUSTRALIA)
ChannelStep 200kHz(USA)
 100kHz(AUSTRALIA)
Sensitivity 2.8µV
StereoSeparation 30dB
SignaltoNoiseRatio 50dB
AM RADIO
FrequencyRange 530-1710kHz(USA)
 522-1710kHz(AUSTRALIA)
ChannelStep 10kHz(USA)
 9kHz(AUSTRALIA)
UsableSensitivity 32dB
AUDIO/VIDEO OUTPUT
Output 750mV
Impedance 10kOhm
GENERAL
PowerSupply 12VDC(10.8-15.6Vallowable)
SpeakerImpedance 4or8ohm
Outputpower 45Wx4CH
Fuse 10A
Note: Specicationandthedesignaresubjecttopossiblemodicationwithoutnoticeduetoimprovements.
FCC ID: 2ABH3-DV5XXX
Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart
15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterference
inaresidentialinstallation.Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnot
installedandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.
However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoes
causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipment
offandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
 -Reorientorrelocatethereceivingantenna.
 -Increasetheseparationbetweentheequipmentandreceiver.
 -Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
 -Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
 Changesormodicationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’s
authoritytooperatetheequipment.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubject
tothefollowingtwoconditions:
 (1)thisdevicemaynotcauseharmfulinterference,and
 (2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.
CorrectDisposalofthisproduct.Thismarkingindicatesthatthisproductshouldnotbedisposedwithother
householdwastesthroughouttheEU.Topreventpossibleharmtotheenvironmentorhumanhealthfrom
uncontrolledwastedisposal,recycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Toreturnyouruseddevice,pleaseusethereturnandcollectionsystemsorcontacttheretailerwherethe
productwaspurchased.Theycantakethisproductforenvironmentalsaferecycling.

IM-DV5700-Rev5.0 - PAGE 17

IM-DV5700-Rev5.0 - PAGE 18

IM-FAV00020 V6.0
Furrion Innovation Center & Institute of Technology
● 52567 Independence Ct., Elkhart, IN 46514, USA ● Toll free:1-888-354-5792
FURRION.COM
©2007-2018 Furrion Ltd. Furrion® and the Furrion logo are trademarks licensed for use by Furrion Ltd.
and registered in the U.S. and other countries.