Furrion FOS43TASK User manual
4.
3"
Vision S
Camera
System
Systeme
de
camera Vision S
de
4.3
po
Sistema
de
camara Vision S
de
4.3"
Instruction Manual
Manuel d'instructions
Manual
de
instrucciones
•
The
packing contents may
be
different
based
on
the kityou purchased.
Please take the actual product
as
standard.
•
Le
contenu
de
/'embal/age peut etre different
en
fonction
de
la trousse
achetee.
Veu1llez
prendre
le
produ1t
reel
en
reference.
•
Es
pos,ble
que
las contenidos
de/
embalaJe
sean
dderentes segun elktt
que
haya
comprado.
Tome
elproducto real
coma
estandar
Model/Modele/Modelo:
FOS43TASK/F0S43TASR
FOS43TASE/F0S43TASF
I
I
I
Welcome
Thank you
for
purchasing the Furrion®Vision S Camera System. Before operating
your
new
product, please read these instructions carefully. This instruction manual contains information
for
safe use, installation and maintenance of the product.
Please keep this instruction manual in a safe place
for
future reference. This
will
ensure safe
use
and
reduce
the
risk
of
injury.
Be
sure
to
pass
on
this
manual
to
new
owners
of
this
product.
The manufacturer does not accept responsibility
for
anydamages due to not observing these
instructions.
Ifyou have any
further
questions regarding
our
products, please contact us
at
suppo
rt@furrion.c
om
V
'
Contents
I
Welcome
....
..
......................................................................................1
Contents ............................................................................................2
Important
Safety lnstructions............................................................3
FCC
Statement........................................................................................................4
IC
Statement ...........................................................................................................5
Product Overview ..............................................................................6
Pr
oduct
Descript
io
n................................................................................................6
M
onito
r ....................................................................................................................6
Rea
r Camera ...........................................................................................................6
,...
Sha
rkfin Camera ....................................................................................................7
Installation ........................................................................................8
What's
in
the b
ox
.....................................................................................................8
M
on
i
to
r Installa
ti
on
.................................................................................................8
Camera Insta
ll
a
ti
on
................................................................................................8
Electr
ica
l
Con
nections............................................................................................
13
Getting
Started
..................................................................................
14
Ac
ti
vate the Monitor................................................................................................
14
Pairing the Camera
and
Monitor ............................................................................
14
Change Settings.................................................................................
16
Ca
mera
Se
t
ti
ng.......................................................................................................
16
Picture Sett
ing
........................................................................................................
18
Software
Ve
r
sion
.....................................................................................................
18
Operation...........................................................................................19
Adjust the Came
ra
An
gle ........................................................................................ 19
Operati
ng
t
he
System
..............................................................................................
19
Care
and
Cleaning
..............................................................................
20
Specifications ....................................................................................
21
Troubleshooting.................................................................................
22
Warranty
............................................................................................
23
----
---------
------
---10
:=URRION
ImportantSafetyInstructions
READ
THESE
INSTRUCTIONS
CAREFULLY
BEFORE
INSTALLING
OR
USING
THE
SYSTEM
This product
is
intended
to
assist in safe
driving and to
allow
the
driver
to have a
broaderview
while
the vehicle is in reverse.
You,
as
the driver, are solely responsible
for
the safe operation of yourvehicle and
the safety of
your
passengers according to
your
local
traffic regulations.
Do
not use
any features of this system to the extent ,t
distracts you
from
safe driving.
Your
first
priority
while
driving should always
be
the safe operation of yourvehicle. Furrion
cannot accept any responsibility
for
accidents
resulting from failure to observe these
precautions
or
safety instructions.
1.
This product utilizes high voltage. Any
'unauthorized modifications
or
damage to
the product may result in electrical shock.
Handle
all
components
with
care. Inspect
regularly
for
damage to components and
cabling.
2
You
are responsible
for
ensuring the
installation
of
this
product does not void
or
affect the vehicle manufacturer's
warranty. Furrion is not liable in
full
or
in
part
for
improper
installation resulting
in loss
or
damage to your property,
or
for
voiding
all
or
p
art
of the vehicle
manufacturer'swarranty.
3.
Do
not apply excessi
ve
force to any
of
the components contained
within
this
kit. Excessive force used before, during
or
after
installation th
at
results in a
damaged
or
nonfunctional
part
will
void
all
warranties.
4.
Please follow the procedures in this
instruction manual. Improperinstallation
or
modification of this product
will
void
all
warranties.
ManyJurisdictions have laws and regulations
relating to the use
of
cameras and some do
not
allow
for
the obstruction of information
contained on a license plate. Before using
this
product, it
is
the buyer's responsibility
to
be
aware of and comply
with
anyapplicable
laws and regulations that apply to license
plates
or
may prohibit
or
l1m1t
the use of
cameras.
Electrical Safety
• A battery
or
12V
DC
electrical system
presents a
risk
of electrical shock
or
burn. Ensure
all
power sources are
isolated before installation.
• Insulate unconnected wires with vinyl
tape
or
similar.
• Use insulated tools when working
with
a
powersupply.
Caution
• There are no serviceable
parts
in the
Furrion Wireless Observation Camera
System.
Do
not disassemble
or
attempt
any repairs.
• There are no fuses
or
disconnects in the
Furrion Wireless Observation Camera
System.
Install
external fuses/breakers
as required.
Installation
• Installation and
wiring
of
this
product
require specialist skills.
To
ensure proper
and safe installation, please seek a
specialist technician.
• Only use supplied
or
recommended parts.
• Use
watertight
connectors
for
the camera
power supply cable to powersource.
• Connect the camera to a 12-24V
DC
circuit using
18AWG
or
larger
cables.
• Ensure correct polarity
of
DC
power
supply to the camera.
•
To
reduce the
risk
of
fire, connect the
camera only to a circuit provided
with
a
maximum branch-circuit over
current
protection device.
•
Do
not route
wiring
in
areas that may get
hot.
•
Take
necessary precautions wh
en
working at elevated levels.
0,-----------
--------
--
-
------
?'
U""
ION
ImportantSafetyInstructions
Use
• Electricalappliances and overhead power
lines can affect the wireless signal.
•
Do
not place the
monitor
in a location
where it might
hinder
field
of
v1s1on
while
driving.
• Consideration should
be
given
to
any
airbagswhen installing the monitor.
Do
not place the
monitor
where
it
might
hinder the airbag
or
become hazardous
if
the airbag is deployed.
Care
•
Do
notwash the vehicle
with
an automatic
car
wash
or
high pressure water. This
maydamage the camera.
• Clean the
LCD
screen
with
a
microfiber
cloth.
Do
not use coarse
or
abrasive
materials.
•
Do
not use alcohol
or
ammonia based
products to clean the L
CD
screen. Only
use specialist screen cleaning products.
• Use a wet cloth to clean the camera lens.
A
dry
cloth may scratch the camera lens.
FCC
Statement
The equipment complies
with
RF
exposure
limits. This module
1s
limited to installation
in mobile
or
fixed
applications. The antenna
used for this tr
ansmitter
must
not
be
co-
located
or
operating in conjunction with any
other
antenna
or
transmitter.
This device complies with P
art
15
of the
FCC
Rules. Operation is subject to the following
two conditions:
11)
This device may not cause
harmful
interference.
12)
This device
must
accept any interference
received, including interference that may
cause undesired operation.
NOTE:
The Grantee is not responsible for
any changes
or
modifications not expressly
approved
by
the party responsible for
compliance. Such modifications could
void the user's authority to operate the
equipment.
NOTE:
This equipment has been tested and
found to comply with the
limits
for a Class B
digital device, pursuant
to
part
15
of
the
FCC
Rules. These
limits
are designed to provide
reasonable protection against
harmful
interference in a residenti
al
installation.
This equipment generates, uses and can
radiate radio frequency energyand,
1f
not
installed and used in accordance
with
the
instructions, may cause h
armful
interference
to radio communications. However, there
is no guarantee that interference
will
not
occur in a
particular
installation.
If
this
equipment does cause
harmful
interference
to radio
or
television reception, which can
be determined by turning the equipment
off and on, the
user
is encouraged
to
try
to
correct
the interference by one
or
more
of the
following measures:
Reorient
or
relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an
outlet
on
a circuit different
from
that to which the
receiver is connected.
Consult the
dealer
or
an experienced
radio/TV technician
for
help.
RF
Exposure
The device has been evaluated to meet
general
RF
exposure requirement.
To
maintain compliance
with
FCC's
RF
exposure guidelines,
this
equipment should
be
ins
talled and operated
with
a
minimum
distance of 20cm between the radiator and
your body.
-
-----
--
-----
-
------
---
--0
:=URRION
Important SafetyInstructions
IC
Statement
This device complies with Industry Canada
licence-exempt
RSS
standardlsl. Operation is
subject to the following two conditions:
111
this device may not cause interference, and
121
this device
must
accept any interference,
including interference that may cause
undesired operation
of
the device.
RF Exposure
The device has been evaluated to meet
general
RF
exposure requirement.
To
maintain compliance
with
RSS-102 -Radio
Frequency IRFI Exposure guidelines, this
equipment should be installed and operated
with
a
minimum
distance of 20cm between
the radiator and your
body.
(0-
----
---
----------
--
~ u
""ION
Product
Overview
Product
Description
The Furrion Vision S Camera System is designed to assist the driver by providing a
clear
and
wide image of the area behind the vehicle whenever the vehicle is shifted into reverse. Never
rely solely
on
this product to ensure the area
is
clear
of
children
and/or
obstructions. Use your
monitor
and look both ways. This product is not intended to replace existing safety procedures,
but
rather
to add an additional safety tool foryour vehicle.
CAUTION:
Do
not back up yourvehicle while watching the
monitor
screen. Always look in the
d1rect1on
the vehicle is traveling. Use the
monitor
as an aid to ensure there are no children
or
obstructions. The image
on
the
monitor
1s
not designed to show distance and may be
misleading. The actual distance is less than appears in the monitor. The range of the image is
limited.
Be
aware of blind spots.
Moni:::,r
Screen
RearCamera
LED
Indicator
__
........
Power/Confirm
Up
Menu/Return
Down
Parking Line
r-----Antenna
Lens
----
Monitor Pairing
Button
-----------------------,©
:=-URRION
Product Overview
Sharkfin
Camera
-----Lens
LED Indicator
___
_,
8
IR
LED
0...--
------
---
----------
--
---
::::'
UR
RION
Installation
READ
THIS
MANUAL
BEFORE
INSTALLATION
NOTE
:
We
have included
all
of the
items
needed
for
most standard installations, but
all
vehicles are different.
We
recommend
you review
your
vehicle completely before
starting.
Whats in the box
Make sure you have the following items
included in the packaging. If any
item
is
damaged
or
missing, contact
your
dealer.
• Monitor x 1
• Windshield Stand x 1
• Monitor Power Cable x 1
• Camera !different by model)
• Antenna !quantity different by modell
• Warranty Card x 1
• Instruction Manual x 1
NOTE:
The contents included may be
different based on the
kit
you
purchased.
Please take the actual product as standard.
MonitorInstallation
Choose a
monitor
location in
your
vehicle that
does not block yourview and complies
with
local laws
for
safe driving.
Do
not place in an
area where
it
might
interfere
with
driving.
WARNING
:
To
prevent the
risk
of electric
shock
or
fire, during installation, remove the
key from the ignition and isolate the
12V
or
24V
power source.
1.
Clean the mounting area where you are
going
to
install
the
monitor
with
a cleaner
that does not leave a residue.
2.
Remove the protec
ti
ve
film
from
the
bottom
of
the suction cup.
3.
Carefully position the suction cup
on
the
windshield and rotate the locking
arm
downwards to affix securely. !Fig. 1)
4.
Align the
ball
of
the suction cup
with
the
opening
on
the back of the
monitor
and
push
firmly
until
locked into place. !Fig.
2)
'
"1
<
'/
t
..
\,,
,;,El
II-
'•1
' '
~(YJ "o
t.
J
~
(~
)
,
y
~
5.
Rotate the moni
tor
to adjust the visual
angle as needed.
Camera Installation
CAUTION:
Ensure there are no electrical
cables, gas lines, pipes
or
other
important
parts behind where the
drill
holes
will
be.
To
prevent the
risk
of electric shock
or
fire,
during installation, remove the key
from
the
ignition and isolate the
12V
or
24V
power
source.
--
-
--------------------
lg\
:=u""ION
\::,_J
Installation
Suitable Installation Position
• For optimum performance. the camera
should be mounted where there
1s
minimal
obstruction between the camera
and monitor. Dense side-
wall
material
and electrical appliances can reduce
signal strength.
• Where practical install, as high as
possible
at
the
rear
of the vehicle.
• Horizontal-centerof the vehicle
or
as
close as is optimal.
• Mount camera at least 2 inches above
or
below running lights. Close proximity
to lights may cause image blooming,
blurring
and reduced night vision
performance.
• The area should be flat with enough
surface area to accommodate the
bracket.
• The surface area should be clean and
dry
for
a
watertight
installation.
• Ensure that power can be fed to the
installation area from within the vehicle.
· ·
rRear
C.amera
Camera Location
Testing
Prior
to permanently mounting the camera, it
is advisable to check
1f
the intended mounting
location
will
achieve adequate signal.
• Pair the camera and
monitor
(see Pairi
ng
the Camera and Monitor section!.
• Temporary secure the camera in the
intended location
or
as close as possible.
• Check signal icon Y
.111
on
the monitor.
Ideallythere should be 3-4 bars.
• Ifthe signal is 0-1 bars. reposition the
camera and
or
monitor
The signal
can
also
be
improved
by
decreasing the
amount
of obstructions between the
camera and
monitor
.
Y.,11
Good
Signal
I
Y.
Poor Signal
Sharkfin Camera Installation
(i
f purchased)
1. Select a suitable mounting position where
you are going to
install
the doorway
camera. Mark a basic outline using the
provided bracket gasket. (Fig.
31
•
0
------------------------
:=
U R R
ION
' Installation
2.
Drill a
5/a
..
center
hole on the vehicle wall
using a
5/a
..
hole saw. (Fig.
4)
3. Feed the supplied 6-foot
camera
power
cable through the gasket. Ensure the bare
end
of
the cable goes into the vehicle and
the flat side faces inward. (Fig.
5)
4.
Pull out the
camera
power cable, leaving
approx 2 inches
of
slack. (Fig.
6)
5.
Install the antenna onto the
camera
and
rotate clockwise to lock into place.
!Fig.
7)
6.
Connect the
camera
powercable to the
camera
cable.
(Fig
.
SJ
7.
Place the attached cables and
connections into the bracket housing
by
first placing the cable to the right.
Place the
camera
cable filter
in
the left
of
the bracket housing. (Fig.
9)
-----------------
------
-
--
----,
@
~URRION
Installation
Fix the gasket and bracket to the vehicle
using
four¾
..
flat self-tapping screws.
Make sure the camera powercable is not
damaged while attaching the device to the
vehicle. !Fig.
101
9.
Make sure the sealing lip around the edge
of the gasket is seated over the edge
of
the bracket before fully tightening the
screws.
Rear Camera Installation (if
purchased)
1.
Select a suitable position
on
the back of
the vehicle
wall
where you would like
to
install the camera.
2.
Installthe antenna onto the camera and
rotate clockwise to lock into place.
[Fig.
11
I
3.
Remove the lens cover by lifting the slot
at
the bottom of the traffic light.
IFig. 12I
4.
Remove the two screws holding the
camera
part
using a Phillips-head
screwdriverand set aside. IFig. 13I
5.
Pull
to remove the camera part
from
traffic light and save
in
a safe place in
case of future use. [Fig. 14I
r-
®
---------
-
--------
---
-----
--
:=
u
~~ION
Installation
6.
Secure the traffic
light
base
on
the vehicle
wall
using the four
flat
self-tapping
screws (quad drive
flat
head #6 x
¾"
self-
drilling wood screw!. (Fig.
151
l
_
.,..
'
p=>
----
-\
7
\c.
--·
-\
~
..,....-::::>
--
, ~
~--
·
-,
~
~-
T~
~
----
-
7.
Insert the
front
or
rear camera into the
traffic
light
base and secure
with
two
flat
self-tapping screws provided.
(Fig.
16
and Fig.
17)
8.
Replace the lens cover over the traffic
light
base and press
until
a
"click"
is
heard. The camera is now fully installed
onto the vehicle. (Fig.
18
and Fig.
191
9.
Repeat steps 1 to 7 to install the
other
camera.
-
--
------------
---
----
--
-------1@
?"URRION
Installation
Electrical
Connections
Connecting the Monitor
• Route the power cable to the vehicle's
cigarette
lighter
socket 12/24V power
outlet. The cable
must
notinterfere
with
the safe operation of the vehicle.
• Insert the
small
12/24Volt
DC
plug of
the power cable into the
right
side of the
monitor.
• Plug the 12/24 Volt cigarette
lighter
plug
into the vehicle's cigarette
lighter
socket.
Connecting the Camera
A WARNING
When connecting wires, ensure the circuit
is isolated
by
disconnecting the negative
terminal
on
the battery.
• Ensure correct polaritywhen wiring the
cables. RED+ BLACK-.
• Ensure
cor
rect polaritywhen wiring.
• Wire connections and
terminals
must
be sealed and waterproof.
The Furrion Vision S Camera System can be
connected
to
an electrical power source via a
7
Way
Connector.
Wiring to running lights: the camera
will
activate when the running lights are switched
on.
Wiring to reverse lights: the camera
will
activate when the vehicle engages reverse
gear.
ConnKUto
-nVl24V
Po-Supply
Consult the vehicle's service manual
for
specific
wiring
color code.
C
\ - {o -
7 WAY
CONNECTION
Running,
__
Q
R•v•n•
or
'f
Auxlllary
light•
When wiring this camera directly to a
12V
battery
or
converter
In
your
RV,
use an in-line
switch
on
the power cable to power
on
or
off
your camera. This
will
enable this camera to
be used when parked without a tow vehicle
connected.
IN-LINE
SWITCH
DC
POWERSUPPLY
Connecting
the
Traffic Light
• Route the power cable to the vehicle's
12V
running light. The cable
must
not
interfere
with
the safe operation of the
vehicle.
A WARNING
Neverconnect the
traffic
light to a power
source over
12V,
damage to the
traffic
light
may occur.
c ]
@ -
----------
--
-
--
----
------
----
=--
U_ R_R-
10
- N
Getting
Started
The camera and
monitor
need to be paired
the
first
time
you are using
your
Vision S
Camera System.
NOTE
: Ensure both the camera and
monitor
has
power
supplied during pairing and
setting processes. (The vehicle
may
need
to
be
running.)
Activate
the
Monitor
In
off
mode, press the(!) button on the
right
ofthe
monitor
to
turn
on the monitor. In on
mode, press and hold the (!) button to activate
the monitor.
There are
four
options that
allow
you to set
the
wireless
vehicle
rear
observation system
before operating.
Pairing
the
Camera and Monitor
1.
Use
.A.
or
'Y
button to high
light
PAIRING
menu, then press(!)
to
enter
the next
page.
2.
Press the "
MONITOR
PAIRING
"'
button at
the bottom
of
selected camera to pair.
Monitor Pa.ring Button
- -
------
-
--------
---
----------;@
?'U~~ION
Getting
Started
Once paired successfully, a red
c:n:>
icon
will
appear
after
the device
list.
4.
An X icon indicates pairing failed, repeat
steps 2 and 3 to
pair
again.
5.
Refer to "CameraSettings" section
for
detailsettings of the camera.
@----------------------------
?'UR
R
10
N
Change
Settings
Camera Setting
Use .A
or
T button to
highlight
SETUP
menu,
then press(!) to
enter
the
next page
or
press
= button to return to the previous page.
MIRROR
SETTING
1. Use .A
or
T button to
highlight
MIRROR
menu, then press(!) to
enter
.
2.
Press
.A
or
T button to set
the
camera
image as
NORMAL
10
°
),
ROTATE
1180
°
1.
FLIP !Horizontal
Mirror)
or
FLIP &
ROTATE
!Vertical Mirror). Press(!) to
confirm
your
selection
or
press=
button
to return
to
the previous page.
VOLUME
SETTING
1.
Use .A
or
T button to highlight
VOLUME
menu, then press(!)
to
enter
.
2.
Press
.A
to increase the volume
or
press
T
to
decrease.
------------------------@
FURRION
.r:.
Ill
_,
en
C
w
Change Settings
AUTO
DIM SETTING
Use
.&
or
T button to highlight
AUTO
DIM
menu, then press
<!>
to enter.
. ·~
MIRROk
(j1))
VOLUME
0
s~T
·.
Jr..,
r-:
LCD
AUTO
OFF'
'};_
MOTION
DETECT
2.
Use
.&
or
T button to
select
✓
or
X .
Press
<.!>
to confirm your selection
or
press=
button to return to the previous
page.
Press
✓
or
X
to
enable
or
disable
the light detective function.
LCD
AUTO
OFF
SETTING
1.
Use.&
or
T button to highlight
LCD
AUTO
OFF
menu, then press
<.!>
to enter.
2.
Press.&
or
T button to set the
LCD
auto
off time as
10
SEC,
20
SEC,
30
SEC
or
X
[off!. Press
<.!>
to confirm your selection
or
press=
button to
return
to the previous
page.
MOTION
DETECT
SETTING
The motion detect function
is
used to
detect objects in motion and assist in safe
driving
while
the vehicle is in reverse. When
on, the
monitor
LCD
will
be illuminated
automaticallywhen motion is detected.
1.
Use
.&
or
T button
to
highlight
MOTION
DETECT
menu, then press
<.!>
to enter.
•-.
~
MIRROR
(]1))
VOi
UME
0 I
AUTO
DIM
l
____
,
Jb-
T
;JP
LJ
LCD
AUTO
orr-
17'\-------
------------
---------------
Change
Settings
2.
Press A
or
T button to
set
the
LCD
auto
off
time
as
LOW,
MEDIUM,
HIGH
or
X
loft). Press
<.!.)
to
confirm
your
selection
or
press= button
to
return
to the previous
page.
Picture Setting
1.
Use A
or
T button to
highlight
LCD
AUTO
OFF
menu, then press
<.!.)
to enter.
2.
Use A or T button to highlight
BRIGHTNESS
,
CONTRAST
or
COLOR
menu, then press
<.!.)
to enter.
3. Press A
or
T to change the
BRIGHTNESS,
CONTRAST
or
COLOR
setting. Press
<.!.)
to
confirm
your
selection
or
press= button to
return
to the
previous page.
Software Version
Use A orT button to
highl
i
ght
VERSION
menu, then press
<.!.)
to
enter
and view the
current
software version.
-
-----
-------
----
--------
---®
?"URRION
: Operation
I
The Wireless Vehicle Rear Observation
System operateswhen the vehicle
is
shifted
into reverse. The Camera
transmits
a
clear
and wide image
with
Audio
from
the area
behind
the
vehicle to
the
monitor
inside the
vehicle. During the vehicle in moving, the
speaker is recommended
to
be
mute
.
The monitor, when powered, remains in sleep
mode
until
it
receives a video signal on the
2.4GHz frequency. When the
monitor
receives
a video signal, it automatically
turns
on and
displays the image
from
the camera.
The
monitor
automatically adjusts for color,
brightness, and contrast, for
either
daytime
viewing
or
nighttime
viewing. At
night
the
picture
will
appear Black and White. This is
due to the
low
light
level and is
normal.
NOTE
: Because this is a wireless system,
the
monitor
is always watching
for
a video
signal.
It
is possible
to
receive signals
from
other
cameras. Systems such as security
cameras, baby monitor
s,
and even other back
up camera systems can
trigger
the
monitor
to briefly
turn
on. This is
normal
for
wireless
products.
If
you find you have too much
activation due to video signals
in
your area,
use the included
monitor
power
wire
and run
it
to
the
rear of the vehicle. Attach it to the
same powersource as the camera, this
will
insure the
monitor
will
only come on when
you are in reverse and
will
elim
inate any false
signals.
Adjust the Camera Angle
You
can manually adjust the
rear
and
sharkfin cameras. Both rotate upwards and
downwards 10-50°1. !Fig.
20
and Fig.
21
l
Operating the
System
Button
(!)
....
-
-
-
...
p
Power/Confirm
Up
Menu/Return
Down
Parking Line
Function
Use this button
to
turn
the
monitor
On
and Off and to confirm
menu selections.
Use this button
to
navigate menu
selections and adjust settings.
Use this button
to
switch between
the viewing screen and the menu
screen.
Press to return
to
the previous
menu.
Use this button
to
navigate menu
selections and adjust settings.
Use this button to turn on the
screen guidelines
On
and
Off.
®------
--
-------------------
Other manuals for FOS43TASK
1
This manual suits for next models
3
Table of contents
Other Furrion Digital Camera manuals
