Furuno NAVNET 3D MFD8/12/BB User manual


Installation Guide v1.0
MFD8/12/BB

READ ME FIRST!
Please read this document before installing and
powering ON your NavNet Display
INSTALLATION TOOLS YOU WILL NEED: An ordinary USB MOUSE
AND USB KEYBOARD for the MFDBB Installation! These are also helpful
with the MFD8/12 Installation.
www.furunousa.com

2
Contents
1.Mounting................................................................................................................11
1.1.MFD8/12 Mounting...........................................................................................11
1.1.1.MFD8/12 Flush Mounting ..........................................................................12
1.1.2.MFD 8/12 Desktop and Overhead Mounting .............................................14
1.2.MFDBB Processor Mounting............................................................................15
1.2.1.MFDBB Processor Desktop or Deck Mounting..........................................15
1.2.2.MFDBB Processor Bulkhead Mounting .....................................................16
1.2.3.MDBBB Keyboard Mounting......................................................................16
2.Wiring.....................................................................................................................19
2.1.Overview..........................................................................................................19
2.1.1.MFD8/12 Overview....................................................................................19
2.1.2.MFDBB Overview......................................................................................20
2.2.Power Connections..........................................................................................20
2.2.1.MFD8/12....................................................................................................20
2.2.2.MFDBB......................................................................................................20
2.3.DATA Ports (NMEA0183).................................................................................22
2.3.1.Overview....................................................................................................22
2.3.2.DATA 1 description....................................................................................22
2.3.3.DATA 2 Description...................................................................................23
2.4.NMEA2000 Description and Information..........................................................25
2.4.1.MFD...........................................................................................................25
2.4.2.DRS Radar................................................................................................25
2.4.3.NMEA2000-0183 Data Conversion and NMEA2000 Bridging...................26
2.5.DRS (Radar) Connection .................................................................................27
2.5.1.Connecting the DRS to MFD8/12..............................................................28
2.5.1.Connecting the DRS to MFDBB ................................................................29
2.6.Network............................................................................................................30
2.6.1.Introduction................................................................................................30
2.6.2.Power Synchronization..............................................................................31
2.7.Video Inputs.....................................................................................................33
2.7.1.Analog Video.............................................................................................34
2.7.2.IP Camera .................................................................................................34
2.8.External Monitors.............................................................................................36
2.8.1.MFD8/12....................................................................................................36
2.8.2.MFDBB......................................................................................................36
2.9.USB and Audio Connection..............................................................................37
2.9.1.USB Ports..................................................................................................37

3
2.9.2.Audio .........................................................................................................39
2.10.MFD8/12 Video, USB and Audio Connection ...............................................39
2.10.1.Waterproof Connection ..........................................................................39
2.10.2.Non Waterproof connection....................................................................42
3.Configuration..........................................................................................................43
3.1.Introduction ......................................................................................................43
3.1.1.Selecting a Master.....................................................................................44
3.1.2.Data Source Selection...............................................................................44
3.1.3.Installation Wizard Conceptual Description ...............................................44
3.2.Installation Wizard Own Settings......................................................................45
3.2.1.Own Settings (Master, Power Synchronization, Monitor)...........................46
3.2.2.NMEA2000 Data Configuration .................................................................47
3.2.3.NMEA0183................................................................................................48
3.3.Installation Wizard Global Settings...................................................................51
3.3.1.Boat Parameter Settings............................................................................51
3.3.1.Engine Parameters (Analog Display).........................................................52
3.3.2.Assigning Nicknames ................................................................................53
3.3.3.Camera Names .........................................................................................54
3.3.4.Primary Data Source selection..................................................................54
3.3.5.Sounder Configuration...............................................................................57
3.3.6.DRS (Radar) Configuration........................................................................59
3.4.MFDBB Keyboard/Processor Linking...............................................................61
4.Registering the System..........................................................................................62
4.1.SystemID Description.......................................................................................62
4.2.Registration Card.............................................................................................62
5.Appendix................................................................................................................63
5.1.Example NN3D System Configurations ...........................................................63
5.1.1.Basic Plotter/Fish Finder Installation .........................................................63
5.1.2.Basic Plotter/Radar/Fish Finder Installation...............................................64
5.1.3.Dual MFD Installation Example .................................................................66
5.1.4.Dual Screen MFDBB Installation with Pilot Integration..............................67
5.2.Configuring AXIS IP Cameras..........................................................................69
5.2.1.Introduction:...............................................................................................69
5.2.2.Setting the IP of the computer...................................................................69
5.2.3.Set up the IP address of the camera.........................................................71
5.2.4.Configure the camera................................................................................75

4

5
Standard supply (MFD8/12)
Name Type Part Number
(PN) Qty Remarks
Multi Function
Display MFD8 -1Choose one.
MFD12 -
Installation
materials CP19-00900 000-011-780 1 set For MFD8, CP19-00901*, cables
CP19-01000 000-011-781 For MFD12, CP19-01001*, cables
Spare Parts SP19-00701 001-028-020 1 set For MFD8, fuses
SP19-00801 001-028-030 For MFD12, fuses
Accessories FP19-01101 001-023-060 1 set Panel/Bezel Removal tool
*See the lists at the end of this manual.
Optional supply (MFD8/12)
Name Types Part Number (PN) Remarks
Cable Assemblies
NMEA0183 and
NMEA2000 Micro-
Cables
MJ-A7SPF0007-050C 000-154-028 5 m, NMEA0183, w/7 pin
Female connector(DATA1)
M12-05BM+05BF-010 000-167-962 φ6, 1 m, NMEA2000, w/M-F
micro connectors
M12-05BM+05BF-020 000-167-963 φ6, 2 m, NMEA2000, w/M-F
micro connectors
M12-05BM+05BF-060 000-167-964 φ6, 6 m, NMEA2000, w/M-F
micro connectors
M12-05BFFM-010 000-167-965 φ6, 1 m, NMEA2000, w/micro
connector
M12-05BFFM-020 000-167-966 φ6, 2 m, NMEA2000, w/micro
connector

6
M12-05BFFM-060 000-167-967 φ6, 6 m, NMEA2000, w/micro
connector
Cable Assemblies
Ethernet Network MOD-Z072-020+ 000-167-175 LAN cross, 4-pair, 2 m
MOD-Z072-050+ 000-167-176 LAN cross, 4-pair, 5 m
MOD-Z072-100+ 000-167-177 LAN cross, 4-pair, 10 m
MOD-Z073-030+ 000-167-171 LAN straight, 2-pair, 3 m
MJ-A6SPF0016-005C 000-159-689 For FAX-30, ETR6N/10N
connection
NMEA 2000
Terminators and
“T” Connectors
LTWSS050505FMF-
TS001 000-168-603 NMEA 2000 “T” Connector, micro
LTWMC-05BMMT-
SL8001 000-168-604 NMEA 2000 terminator, male, micro
LTWMC-05BFFT-
SL8001 000-168-605 NMEA 2000 terminator, female, micro
DVI-D Cable DVI-D/D SINGLELINK 000-149-054 5 m, for Multi-purpose LCD
connection
DVI-D/D S-LINK 000-150-200 10 m, for Multi-purpose LCD
connection
External Buzzer OP03-136 000-086-443 Suggest Radio-Shack 273-070
or equivalent
Junction Box FI-5002 000-010-765 For FI-50 series/NMEA2000
Terminal Strip Connections
Rectifiers
Furuno AC-to-DC
Power Supplies
RU-3423 000-030-443 w/o PSU-012
PR-62 000-013-484 100VAC, w/PSU-012
000-013-485 110VAC, w/PSU-012
000-013-486 220VAC, w/PSU-012
000-013-487 230VAC, w/PSU-012
Network Hub HUB-101 -NN3D Hub with Sleep Mode
Signal Compatibility

7
RJ45 Junction Box RJ45-to-RJ45 Straight RJ4-5CN-STR For Mast-Step or LAN cable
extension
Connector Boot OP19-7 001-028-090 Waterproofing Kit for MFD8/12
exposed connection points
Operator’s Manual OME-4440 000-167-802
NMEA 2000
Interface Unit IF-NMEA2K1 - Use where NMEA2000-to-
AD10/0183 Data conversion is
required for legacy products

8
Standard supply (MFDBB)
Name Type Code No. Qty Remarks
Processor Unit MPU-001 -1
Control Unit MCU-001 -1Choose one.
Display Control Unit DCU12 -1
Installation Materials
CP19-00600 000-011-664 1 set For MPU-001, Cable, CP19-
00601*
CP19-00700 000-011-663 1 set For MCU-001,
cable, CP19-
00701*
Choose one.
CP19-00800 000-011-662 For DCU12,
cables, CP19-
00801*
Spare Parts SP19-00501 001-023-090 1 set For MPU-001, fuses
SP19-00601 001-023-040 1 set For DCU-001, fuses
Accessories FP19-01201 001-033-760 1For MCU-001, panel remover
FP19-01101 001-023-060 For DCU12, panel remover
*See the lists at the end of this manual.
Optional supply (MFDBB)
Name Types Code No. Remarks
DVI-D Cable DVI-D/D SINGLELINK 000-149-054-10 5 m
DVI-D/D S-LINK 000-150-200-10 10 m
External Buzzer OP03-136 000-086-443

9
Rectifier RU-1746B-2 -
Network Hub HUB-101 -
Joint Box TL-CAT-012 000-167-140-10 For LAN cable extension
Junction Box FI-5002 000-010-765 For NMEA 2000
Control Unit MCU-001 -
Display Control
Unit DCU12 -
Cable Assy MJ-A7SPF0007-050C 000-154-028-10 5 m, NMEA0183, w/7P
connector
MJ-A6SPF0016-005C 000-159-689-11 For FAX-30, ETR6N/10N
connection
MOD-Z072-020+ 000-167-175-10 2 m, LAN
MOD-Z072-050+ 000-167-176-10 5 m, LAN
MOD-Z072-100+ 000-167-177-10 10 m, LAN
MOD-Z073-030+ 000-167-171-10 3 m, for PC connection
M12-05BM+05BF-010 000-167-962-10 φ6, 1 m, NMEA 2000
M12-05BM+05BF-020 000-167-963-10 φ6, 2 m, NMEA 2000
M12-05BM+05BF-060 000-167-964-10 φ6, 6 m, NMEA 2000
M12-05BFFM-010 000-167-965-10 φ6, 1 m, NMEA 2000
M12-05BFFM-020 000-167-966-10 φ6, 2 m, NMEA 2000
M12-05BFFM-060 000-167-967-10 φ6, 6 m, NMEA 2000
CB-05PM+05BF-010 000-167-968-10 φ10, 1 m, NMEA 2000

10
CB-05PM+05BF-020 000-167-969-10 φ10, 2 m, NMEA 2000
CB-05PM+05BF-060 000-167-970-10 φ10, 6 m, NMEA 2000
CB-05BFFM-010 000-167-971-10 φ10, 1 m, NMEA 2000
CB-05BFFM-020 000-167-972-10 φ10, 2 m, NMEA 2000
CB-05BFFM-060 000-167-973-10 φ10, 6 m, NMEA 2000
NMEA connector LTWSS-050505-FMF-
TS001 000-168-603-10 NMEA 2000 distributor (micro style)
LTWMC-05BMMT-
SL8001 000-168-604-10 NMEA 2000 terminator, male (micro style)
LTWMC-05BFFT-
SL8001 000-168-605-10 NMEA 2000 terminator, female (micro style)
LTWNC050505FMF-
TS001 000-160-507-10 NMEA 2000 distributor (mini style)
LTWMN-05AMMT-
SL8001 000-160-508-10 NMEA 2000 terminator, male (mini style)
LTWMN-05AFFT-
SL8001 000-160-509-10 NMEA 2000 terminator, female (mini style)
Operator’s Manual OME-44460 -
NMEA 2000
Interface Unit IF-NMEA2K1 -

11
1. Mounting
1.1. MFD8/12 Mounting
MFD8 MFD12
When selecting a mounting location for the NN3D MFD8/12, keep the following in mind:
• The temperature and humidity of the mounting location should be moderate and
stable.
• Install the unit away from exhaust pipes and ventilators.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• Keep the unit away from electromagnetic field generating equipment such as motors
and generators.
• For maintenance and checking purposes, leave sufficient space from the sides and the
rear of the unit and leave slack in cables. Minimum recommended space is shown the
outline drawing for the display units.
•Test and Confirm that the Operator LCD Viewing Angle, which is fixed, is acceptable
before permanent MFD8/12 installation. This is very important for Flush Mount
Installations!
• A magnetic compass will be affected if the display unit is placed too close to it.
Observe the compass safe distances shown in the SAFETY INSTRUCTIONS to prevent
disturbances to the magnetic compass.
The MFD8/12 can be flush or bracket mounted in a variety of ways.

12
1.1.1.MFD8/12 Flush Mounting
1. Prepare a cutout in the mounting location using the template sheet (supplied) for the
MFD8 or 12.
2. Remove the front panel from the MFD by grasping it at its sides and pulling it
towards you.
3. Attach the mounting gasket (sponge) to the display unit.
4. Fix the display unit by using four self-tapping screws (supplied).
5. Attach the front panel to the display

13
How to detach the front cover when flush mounted.
To detach the front panel when the unit is flush mounted, use the special tool (supplied)
as below. Note that the front cover may be damaged if this procedure is not followed!
1. Insert the tool in the notch on the lower side of the unit
2. Pull the tool to raise the panel slightly. Repeat this action for all notches on the
lower side of the unit
3. Insert the tool into the small notches located on the sides of the panel, and pull
the tool to raise the panel slightly

14
4. Use your hands to detach the front panel from the lower side.
1.1.2.MFD 8/12 Desktop and Overhead Mounting
Follow the procedure below to mount the MFD8 or 12 on a desktop or overhead.
1. For MFD12, attach the liner to each side of the display unit. (Reverse the
MFD12 Liners for overhead mounting.)
2. Fix the bracket (Hanger) by using self-tapping screws (supplied).
3. Screw knob bolts into the display unit, set it to the bracket (Hanger), and tighten
the knob

15
1.2. MFDBB Processor Mounting
The unit can be mounted on the deck, a desktop or on a bulkhead. Take special note
that the MFDBB IS NOT WATERPROOF. Select a mounting location considering the
points below:
• Select a location where temperature and humidity are moderate and stable.
• Consider the lengths of the cables connected among the processor unit, radar sensor
and control unit.
• For mounting on a bulkhead, be sure the mounting location is strong enough to
support the unit under the pitching and rolling normally encountered on the vessel.
• Leave sufficient space around the unit for maintenance and servicing. Recommended
maintenance space appears in the outline drawing at the back of this manual.
• A magnetic compass will be affected if the processor unit is placed too close to the
magnetic compass. Observe the compass safe distances in SAFETY INSTRUCTIONS
to prevent disturbance to the magnetic compass.
1.2.1.MFDBB Processor Desktop or Deck Mounting
Fasten with four self-tapping screws.

16
1.2.2.MFDBB Processor Bulkhead Mounting
Mark four fixing holes positions on the bulkhead. Screw in two 6x30 self-tapping screws
at upper fixing positions, leaving 5 mm protruding. Set the processor unit to the screws
and screw in two self-tapping screws at lower positions. Tighten all screws.
1.2.3.MDBBB Keyboard Mounting
The BlackBox keyboard (control unit MCU-001) is designed to be flush mounted in a
console or panel.
1. Prepare a cutout in the mounting location using the template sheet (supplied) for
the MCU-001.
2. Remove the front panel from the MCU-001 by grasping it at its sides and pulling
it towards you.
3. Attach the mounting gasket (sponge) to the MCU-001.
4. Fix the MCU-001 by using four self-tapping screws (supplied).
5. Attach the front panel to the MCU001

17
How to detach the front panel when flush mounted
To detach the front panel when the unit is flush mounted, use the tool (supplied) as
below. Do not attempt to remove it by any other method, to prevent damage to the unit.
1. Insert the tool to the left-side notch at the bottom of the unit

18
2. Pull the tool to raise the panel slightly
3. Similarly use the tool to raise the panel at the right-side notch.
4. Insert the tool to the space at the one end of the unit, and pull it to raise the panel
slightly. Repeat this procedure for the opposite side
5. Use the tool to raise the panel at the two notches on the upper side of the unit.
6. Use your hands to detach the front panel at both sides of it

19
2. Wiring
2.1. Overview
2.1.1.MFD8/12 Overview

20
2.1.2.MFDBB Overview
2.2. Power Connections
2.2.1.MFD8/12
The MFD8/12 can be powered directly using nominal 12V or 24V DC.
Only use the power cable supplied with the unit and connect it to the Power Connector
at the rear of the unit.
2.2.2.MFDBB
The MCU001 - MFDBB processor unit can be powered using 12V or 24V.
Make the power cable as shown below.