Furuno FS-5075 (500 W) User manual

FS-2575 (250 W)
FS-5075 (500 W)
www.furuno.com
All brand and product names are registered trademarks, trademarks
or service marks of their respective holders.
11053SK Printed in Japan
Catalogue No. S-025
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
FURUNO ELECTRIC CO., LTD.
Nishinomiya, Hyogo, Japan
www.furuno.co.jp
FURUNO U.S.A., INC.
Camas, Washington, U.S.A.
www.furunousa.com
FURUNO (UK) LIMITED
Havant, Hampshire, U.K.
www.furuno.co.uk
FURUNO FRANCE S.A.S.
Bordeaux-Mérignac, France
www.furuno.fr
FURUNO ESPAÑA S.A.
Madrid, Spain
www.furuno.es
FURUNO DANMARK AS
Hvidovre, Denmark
www.furuno.dk
FURUNO NORGE A/S
Ålesund, Norway
www.furuno.no
FURUNO SVERIGE AB
Västra Frölunda, Sweden
www.furuno.se
FURUNO FINLAND OY
Espoo, Finland
www.furuno.fi
FURUNO POLSKA Sp. Z o.o.
Gdynia, Poland
www.furuno.pl
FURUNO EURUS LLC
St. Petersburg, Russian Federation
www.furuno.com.ru
FURUNO DEUTSCHLAND GmbH
Rellingen, Germany
www.furuno.de
FURUNO HELLAS S.A.
Piraeus, Greece
www.furuno.gr
RICO (PTE) LTD
Singapore
www.rico.com.sg
Ø16
150 5.9”
57 2.24” 36
1.42”
650
25.59”
300
11.81”
300
11.81”
707 27.83”
365 14.37”
390 15.35”
20 0.79”
Ø16
40
1.57”
57 2.24”
150 5.9”
510 20.07”
536 21.1”
592 23.3”
12
0.47”
12
0.47”
100 3.94”
125 4.92” 125 4.92”
340 13.39”
100 3.94”
4-Ø7.5
400 15.75”
45
1.77” Ø8
140
5.51”
71.4
2.81”
478 18.82”
380 14.96”
4-7x10
FIXING HOLE
330 12.99”74
2.91”
258 10.16”
297 11.69” 161 6.34”
93 3.66”
130
5.12”
24
0.94”
MAX 20
0.79”
5
0.2”
17
0.67”
108 4.25”
90 3.54”
208
8.19”
208
8.19”
MODEL FS-2575 FS-5075
OFFICIAL NAME OF EQUIPMENT SSB RADIOTELEPHONE
GENERAL CHARACTERISTICS
Rules and Regulations
ITU-R M.1082-1, ITU-R M.1173, ITU-R M.476-5, ITU-R M.490, ITU-R M.491-1, ITU-R M.492-6,
ITU-R M.493-13, ITU-R M.541-9, ITU-R M.625-3, ITU-R M.821-1, IMO Res. A.694(17), IMO Res. A.806(19),
IMO Res. MSC36(63), IMO Res. MSC 68 (68), MSC/Circ. 862, IEC 61162-1 Ed. 4, IEC60945 Ed. 4,
ETS 300 067 ed. 1, EN 300 338-1 V1.3.1, EN 300 338-2 V1.3.1, EN 301 033 V1.3.1, EN 300 373-1 V1.3.1
Frequency Range TX: 1605.0kHz to 27500.0kHz
RX: 100kHz to 29999.99kHz
Number of Channels 256 user-specified channels plus ITU, SSB/TELEX channels
Communication Mode Simplex/Semi-duplex Simplex/Semi-duplex/Duplex (option)
Class of Emission J3E, H3E, A1A, J2B
TRANSCEIVER
RF Output Power 250 W pep 500 W pep (HF) / 400 W pep (MF)
Antenna 10-18 m whip or wire
Tuning Speed within 15 sec
Receiver Sensitivity less than +7 dBµV (4.0-29.99999 MHz, J3E) / less than +13 dBµV (1.6-4 MHz, J3E)
DSC
Receiving Frequency General All DSC frequencies in MF/HF
Distress and safety DSC distress/safety frequencies: 2187.5 kHz, 4207.5 kHz,
6312.0 kHz, 8414.5 kHz, 12577.0 kHz, 16804.5 kHz
Message Storage RX: 50 distress messages, plus 50 non-distress messages
TX: 50 messages, telephone no., frequencies, etc.
POWER SUPPLY 24 VDC, 100/110/120/200/220/240 VAC with optional AC/DC Power Supply PR-850A
40 A (TX), 5.0 A (RX) 60 A (TX), 5.0 A (RX)
EQUIPMENT LIST
Standard 1
Transceiver Unit FS-5075T(FS-5075), FS-2575T (FS-2575) 1 Unit
2
Control Unit FS-2575C 1 Unit
3 Handset HS-2003 1 Unit
4 Antenna Coupler AT-5075 1 Unit
Option 1
Printer PP-510 7 Whip Antenna
2 Printer Interface IF-8500 8 AC/DC Power Supply PR-850A
3 External Speaker SEM-21Q
9 Full Duplex Kit (for FS-5075)
OP05-125
4 Remote Control Unit FS-2575C 10 Matching Box ARD-1
5 NBDP Terminal Unit IB-583 11 Preamp FAX-5
6 BK Interface BK-300 12 WR2 kit OP05-123
Option or connectable equipment
24 VDC
AC/DC Power Supply
PR-850A
100/110/120/200/220/240 VAC
Antenna
Coupler
AT-5075
TX (duplex)* or
TX/RX (Semi-duplex/simplex) RX (duplex)*
NBDP Terminal
IB-583
External Speaker
SEM-21Q
External Speaker
SEM-21Q
Printer
PP-510
DSC
Distress/
Safety
DSC
Routine
WR
Matching Box
ARD-1
BK Interface
BK-300
Navigation
equipment
Alarm
System
Printer Interface
IF-8500
Alarm Unit
IC-350
Preamp
FAX-5
Handset
HS-2003
Control Unit
FS-2575C
Control Unit (remote)
FS-2575C
Handset
HS-2003
Transceiver Unit
FS-5075T for FS-5075
FS-2575T for FS-2575
* Full duplex optionally available on the FS-5075 only
INTERCONNECTION DIAGRAM
CONTROL UNIT
FS-2575C
1.9 kg 4.2 lb
ANTENNA COUPLER
AT-5075
8.5 kg 18.7 lb
TRANSCEIVER UNIT
FS-5075T
27 kg 59.5 lb
FS-2575T
20 kg 44.1 lb
SPECIFICATI O N S

Reliable MF/HF Radiotelephone
for general and distress communications
with integrated DSC/DSC Watch Receiver
▲
MF/HF radiotelephone with DSC facility
▲
Fully meets GMDSS carriage requirements for SOLAS ships operating in A3 and A4 sea areas
▲
Meets the new ITU recommendation on digital selective calling system for use in the Maritime
Mobile Service, ITU-R M.493-13
▲
High-contrast 4.3" bright color LCD (480x272 pixels)
▲
Capable of distress, safety and routine communication
▲
Instant selection of 256 user-specied channels with a rotary knob or direct keypad input
▲
Quick access to DSC message composition by dedicated keys on the control unit
▲
Full-duplex kit available (optional supply for the FS-5075 only)
▲
Quick access to dedicated functions in the menu operation using numeric keypad
MF/HF Radiotelephone
FS-2575 (250 W)
FS-5075 (500 W)
1Volume/Power knob : Sound volume control/Switching of Power ON/OFF
2RF GAIN knob : Adjustment of reception gain
PUSH TO ATT : Press to activate/deactivate RF attenuator
3: Long-press to transmit a DSC distress alert
4: Composition of DSC message for distress alert
:Composition of DSC message except for distress alert and DROBOSE (DSC relay on behalf of someone else*)
Press + :Composition of DSC message for DROBOSE
5: Activation of the brilliance control dialog box
:Activation of tab segment control on the screen
:Opening/closing of the menu dialog box
:Deactivates alarm/deletion of error and pop-up messages/halting of DSC message composition/exiting from the
message composition dialog box/distress cancellation/returning to a previous menu level
:Switching the speaker ON/OFF
6PUSH TO ENTER knob : Shifts the selector and pointer/adjusts the degree of parameter, i.e., brilliance and switch over the display mode
Press to confirm the entered values
7: Switches to the DSC SCAN mode/if pressed during the DSC SCAN mode, routine scan will be halted
:Sets to 2182 kHz SSB
:Switches to radiotelephone mode, and if pressed in radiotelephone mode, channel setting box will be summoned
:Used to enter the following number and symbols (. @ - _ / : 1) as well as quick access to short cut function
:Used to enter A, B, C and 2, and to switch noise blanker setting ON/OFF
:Used to enter D, E, F and 3, and to switch squelch setting ON/OFF
:Used to enter G, H, I and 4 as well as quick access to short cut function
:Used to enter J, K, L and 5, and to switch noise reduction setting ON/OFF
:Used to enter M, N, O and 6
:Used to enter P, Q, R, S and 7 as well as quick access to short cut function
:Used to enter T, U, V and 8, and to switch notch filter ON/OFF
:Used to enter W, X, Y, Z and 9
:Used to reduce the receiver volume of the handset/to shift the pointer in channel/frequency selection dialog box
:Used to enter the number “0” , space and the following symbols (! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ - `{ } ~)/
to tune impedance between an antenna and a transceiver
:Used to raise the receiver volume of the handset/to shift the pointer in channel/frequency selection dialog box
Numbers are assigned for each of the menu items, and the operator
can access each of the menu items either by turning and pressing
PUSH TO ENTER knob to select menu items or simply pressing
number on the numeric keypad.
Simplified menu operation
Press
Press Press
1 2 345
6
7
Control Panel
* composition and relay of the occurrence of a distress event obtained by non-DSC means

Reliable MF/HF Radiotelephone
for general and distress communication
with integrated DSC/DSC Watch Receiver
▲
MF/HF radiotelephone with DSC facility
FS-2575: 250 W output power FS-5075: 500 W output power
▲
Fully meets GMDSS carriage requirements for SOLAS ships operating in A3 and A4 sea areas
▲
Meets the new ITU reccomendation on digital selective calling system for use in the Maritime
Mobile Service, ITU-R M.493-13
▲
High-contrast 4.3” bright color LCD
▲
Capable of distress, safety and routine communication
▲
Instant selection of 256 user-specied channels with a rotary knob or direct keyboard input
▲
Quick access to DSC message composition by pressing dedicated keys on the control unit
▲
Full-duplex kit available (optional supply for the FS-5070 only)
▲
Quick access to dedicated functions in the menu operation using numeric keypad
Night Mode
Night mode is selectable for wheelhouse operation.
On the menu setting, three quick-access functions can be assigned for 1, 4 and 7 on
the numeric keypad, and those assigned functions are displayed on the Radiotelephone
display. The list of functions assigned for quick-access includes: TX frequency setting,
RX frequency setting, class of emission setting, AGC setting, output power setting, TX
frequency monitoring, showing the list of test messages, showing the list of message
files, execusion of daily test, showing the list of log files, and intercom functions.
Quick-access functions
Press
Press
Press
Press
2 Information segment
Displaying:
1user channel selected
2operating frequencies
3
class of emission, AGC, output power and communication mode
4 signal strength, meter reading (IC, VC, RF, VS and IA (antenna current))
5currently activated functions, i.e., noise blanker, etc.
6
short-cut functions assigned for 1, 4 and 7 on the numeric keypad
7own ship L/L, Time
8indications of RF input attenuator ON/OFF as well as RF gain
Radiotelephone display
1 Status segment
Indicating the status of equipment, i.e., speaker ON/OFF, unread DSC message in the inbox, hardware error, etc.
Also, MMSI is shown in radiotelephone and DSC scan displays.
3Tab segment
Up to 7 active procedures can be displayed in this segment. The procedures are for operating: radiotelephone, distress alert transmission, distress alert reception,
general DSC message transmission and general DSC message reception.
1 Status segment
Indicating status of equipment, i.e., speaker ON/OFF, unread DSC message in the inbox, hardware error, etc., TX/RX
frequencies/class of emission for successive communication.
2 Information segment
Displaying:
1DSC contents, status and information
2a list of available operator actions
3indications of RF input attenuator ON/OFF as well as RF gain
DSC display
2 Information segment
Displaying:
1DSC watch frequencies (both distress and routine)
2own ship L/L, Time
3indications of RF input attenuator ON/OFF as well as RF gain
DSC SCAN display
2 Information segment
Displaying menu tree
Menu display
4 Guide segment
Guide to short-cut key functions is displayed.
1
21
2
1
3 4
5 6
7 2 2
1
2
1 1
2 2
1
4
High-contrast 4.3" bright color LCD
Display Modes
Quick-access functions
F1, F2 and F3 on the menu
represent the functions
assigned for 1, 4 and 7
on the numeric keypad,
respectively.
8 3 3
3 3 3