is a nutritious diet. Selecting and
preparing foods for a healthy lifestyle can be costly and very time consuming.
You can spend hundreds of dollars on kitchen appliances and endless time
chopping, dicing, blending and processing fresh foods in order to release their
nutrients and vitamins.
Thanks to your decision to own a Fusion Xcelerator™,you will now save a lot of
time and money preparing all your favorite healthy drinks, shakes and countless
other food recipes that will satisfy you and your family as you travel on the path
to better health.
The unit’s unique shape and design, combined with more than 800 watts of
power, will enable you to prepare one-step meals in seconds. Unlike other units,
the Fusion Xcelerator™
other foods to the cellular level, peels and all, allowing the human body to
absorb and process more of their valuable nutrition more easily.
The Fusion Xcelerator™ has been designed to provide you and your family with
many years of delicious and healthy fresh food recipes… but before you begin
it is very important that you read this entire manual, making certain that you are
totally familiar with its operation and precautions.
Important Safeguards 3
Parts and Accessories 4-5
Getting Started 6-7
Tips: Shake and Tap 6
Keep Cold “Travel Cup” 7
Suggested Use 8-9
Care and Cleaning 10
Manufacturer’s Warranty 11
When using electrical appliances
basic safety precautions should always be followed, including:
• Read and follow all instructions carefully.
• Fusion Xcelerator™has a polarized plug. To
fully in the outlet, reverse the plug. If it still does
electrician.
• Do not immerse the plug, cord or base in water
or liquids.
• Keep hands and utensils away from the cutting
blades while in operation to reduce the risk of
personal injury or damage to the unit. A rubber
spatula may be used, but only when the unit is
unplugged.
• To avoid unit overheating and possible motor
damage never operate the unit for more than one
minute at a time. If the motor stops working due
to overheating, unplug the unit and let it cool
for a few hours before using it again. Your Fusion
Xcelerator™has an internal “shut off” device that
shuts off the unit when it overheats. Letting the
unit cool down should allow the Power Base to
reset.
• Do not operate any appliance with a damaged
cord or plug.
• Unplug the Fusion Xcelerator™when not in use, or
while assembling, disassembling or cleaning.
• Always use your Fusion Xcelerator™on a clean,
the unit’s “suction grip” feet.
• Always completely assemble the blade and mixing
cup before connecting to the Power Base.
• The use of attachments or parts not
recommended or sold by the manufacturer may
cause personal injury or damage to the unit and
will void the manufacturer’s warranty.
• Do not allow cord to come in contact with hot
surfaces.
• Never leave the Fusion Xcelerator™unattended
while it is in “running” mode.
• This appliance should never be operated by
children and special care should be taken when
the unit is in use in their presence.
• Never place the cutting blade on the Power Base
without a mixing cup properly attached.
• Do not attempt to operate unit by defeating the
interlock mechanism.
•
screwed on to the mixing cups before operating
appliance.
• Do not use the Fusion Xcelerator™outdoors or in
wet conditions.
• Blades are sharp. Handle carefully.
• Do not use any Fusion Xcelerator™ parts or
accessories for cooking or heating in a microwave
oven.
• Always plug the electrical cord directly into the
wall outlet. Never use this unit with an extension
cord of any kind.
• Anyone who has not fully read and understood all
operating and safety instructions contained in this
appliance.
SAVE THESE INSTRUCTIONS
For Household Use Only
IMPORTANT SAFEGUARDSTHE MOST IMPORTANT KEY...
INDEX
2 3
FX_IB_QVC_V1_150422 04/22/15 1:37 PM
